Simplicity 1695285 User Manual

Installation Instructions

Front Bumper

Mfg. No./Part No. 1695285

Axion and 150Z Series

2690642, 2690644, 2690645, 2690647

INSTALLATION

1. Attach bumper (A, Figure 2) to inside of frame (B) securing with 5/16-18 x 7/8 capscrews (C) and 5/16-18 flange lock nuts (D).

Figure 1. Contents

Figure 2. Bumper Installation (Footrest and Spindles Ghosted for Clarity) A. Bumper B. Frame C. Capscrews, 5/16-18 x 7/8 D. Nut, Flange Lock, 5/16-18

Kit Contents:

Ref Part No. Qty. Description

1 1733975 1 Bumper Assembly 2 1960686 4 Nut, Flange Lock, 5/16-18 3 1921333 4 Capscrew, Hex, 5/16-18 x 7/8

Before beginning any service work turn off the PTO, set the parking brake, turn off the ignition, remove the key, and disconnect the spark plug wire(s).

WARNING

Note: Lift front of bumper up while tightening hardware to prevent wheels from contacting bumper.

MANUFACTURING, INC. 500 N Spring Street / PO Box 997

Port Washington, WI 53074-0997 USA

Form No. 1734264-01

Rev. 2/2007

TP 200-4438-01-AT-SN

Briggs & Stratton Yard Power Products Group