Parts Manual
g
Signature Professional
Series Snowthrowers
10.5HP Snowthrowers
. No. Description
Mf
1695074 P10524E, 10.5HP Snowthrower
1695075 P10524E, 10.5HP Snowthrower (CE/Export)
11.5HP Snowthrowers
Mfg. No. Description
1695076 P11528E, 11.5HP Snowthrower
1695077 P11528E, 11.5HP Snowthrower (CE/Export)
13HP Snowthrowers
Mfg. No. Description
1695078 P1332E, 13HP Snowthrower
1695079 P1332E, 13HP Snowthrower (CE/Export)
1695080 P1338E, 13HP Snowthrower
1695081 P1338E, 13HP Snowthrower (CE/Export)
Rev.
1733701
11/2006
Part No.:
TP 400-4433-00-LW-S
Table Of Content
s
PRODUCT COMPONENTS PAGES
Handle & Controls Group .....................................................................................................................................
Engine & Frame Group ........................................................................................................................................
Auger Drive Group ...............................................................................................................................................
Auger Housing & Chute Group ............................................................................................................................
Traction Drive Group ............................................................................................................................................
Wheels & Tires Group ..........................................................................................................................................
Decal Group .........................................................................................................................................................
Gear Box Assembly .............................................................................................................................................
12
14
18
22
24
26
Torque Specification Chart ..................................................................... Inside Back Cover
4
8
Handle & Controls Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
987385
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
4
TP 400-4433-00-LW-S
Handle & Controls Group
PART NO. DESCRIPTIONREF NO QTY.
TIE, Self Locking .184 Wide 7.31 Long 1 2825094 6
HARNESS, Hand Warmers/Spout 3 1728968 1
CABLE & SPRING ASSEMBLY, R.H. Auger 5 1728114 1
CABLE & SPRING ASSEMBLY, L.H. Traction 6 1728115 1
SCREW, Hex Head SER Flange Taptite, R5/16-18 x 1 8 1960729 6
HANDLE ASSEMBLY, Channel 10 1733890C 1
CLIP, Speed Wire 14 2834683 1
GROMMET, 1/2 Diameter 15 1664022 1
LEVER & TUBE ASSEMBLY, Clutch 16 1725205A 2
BUSHING, .52 ID x .585 Square x .22 Long Nylon 17 1732732 3
SCREW, Hex Washer Head Taptite, #12-24 x 1 18 1960471 4
HANDLE, Clutch L.H. 19 1727127 1
ROD, Control, 3/8 Diameter, 2.81 Long 2" Flat 20 1677453 1
SCREW, Pan Head Torx #10 x 1/2 Thick 21 1725702 1
CABLE & HANDLE ASSEMBLY 22 1718791 1
HAND GRIP, Heated 23 1723965 2
NUT, Hex Whiz Lock Flange, 1/4-20 26 1930641 4
CAPSCREW, Hex Washer Head, 1/4-20 x 3/4, G5 27 1935450 4
SCREW, Hex Washer Head Taptite, 1/4-20 x 3/4 28 1925592 6
DASHBOARD 31 1667800C 1
NUT, Hex Flange 5/16-18 ESNA 32 1960686 1
SPRING, Compression, .38 ID x 1 Long 33 1701342 1
LATCH, Control, Powdered Metal 34 1705898 1
SPACER, .328 ID x .81 OD x .94 Long 1/2 35 1678579 1
SCREW, Hex Whiz Lock Flange, 5/16-18 x 1-1/2 36 1933689 1
RESISTOR BLOCK, 1.53 37 1724037 1
GUIDE, Control, .434 Wide 1.08 Long, Powdered Metal 38 1705899 1
SCREW, Hex Washer Head Taptite #10-24 x 1 39 1928732 1
HANDLE, Clutch R.H. 40 1727128 1
CAPSCREW, Hex Head 1/4-20 x 3/4, G5 41 1923341 1
BRACKET, Shift Control 42 1723935A 1
SWITCH, Hand Warmer 43 1723967 1
NUT, Hex Keps, 1/4-20 Conical Washer 44 1960685 4
ROD & CLEVIS ASSEMBLY, Shift 45 1714120 1
SCREW, Hex Whiz Lock Flange, 1/4-20 x 2-1/4 46 1960705 1
KNOB, Hole, .357 Diameter 1.14 Diameter, Sphere Softer 47 1713844 1
CARRIAGE BOLT, 1/4-20 x 3/4, G5 48 1931317 2
ROD, 3/8 Diameter, 11.38 Long 49 1726304 1
ROD, Shift Lower 50 1666255 1
PIN, Quick 51 1722460 1
WASHER, 0500 .53 ID x 1-1/4 x .08 Thick 57 1924361 1
BLOCK, Pivot 59 1668524 2
WASHER, Curved, .525 ID x .98 OD x .014 Thick 60 1668681 1
ROD & ARM ASSEMBLY, Pivot, 61 1674567 1
Footnotes
* See your local hardware store for replacement halogen bulbs.
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
5
TP 400-4433-00-LW-S
Handle & Controls Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
987385
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
6
TP 400-4433-00-LW-S
Handle & Controls Group
PART NO. DESCRIPTIONREF NO QTY.
CLIP, .115/.135 Panel 62 2172434 1
BRACKET, Switch Top 63 1729644C 1
BRACKET, Switch Mounting Plate 64 1725427C 1
SCREW, Truss Head Phillips 65 1960725 2
NUT, Hex Lock 10-24 w/Nylon 66 1933896 2
CLIP, Hair Pin 76 1960074 1
SWITCH, Chute Rotator 80 1728969 1
BUSHING, 1/2 ID x 3/4 OD x 1/4 Long Nylon 82 1668185 2
HEADLIGHT ASSEMBLY, Oval Amber 86 1732321 1
* BULB, 881-12V 27 Watt Halogen -- ----- 1
Footnotes
* See your local hardware store for replacement halogen bulbs.
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
7
TP 400-4433-00-LW-S
Engine & Frame Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
987510
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
8
TP 400-4433-00-LW-S
Engine & Frame Group
PART NO. DESCRIPTIONREF NO QTY.
CAPSCREW, Hex Head, 3/8-20 x 1-1/2, G8 1 1922128 1
LOCKWSHER, Spring, 3/8 2 1916965 1
WASHER, 3/8, 0.41ID x 1 OD x .13 Thick 3 1922755 1
PULLEY, Drive Half 7 1726864 1
PULLEY, Engine Half 8 1726863 1
WICK, Felt Oil, 4.65 Long .19 Wide 9 1701825 1
SPRING, Compression 10 1701849 1
SPRING, Compression 11 1702425 1
WASHER, Thrust, 0.766 ID x 2-3/4 OD x .06 Thick 12 1701818 1
PULLEY, Half, 2-1/4 OD 0.752 ID 0.64 Wide 13 1726868 1
PULLEY, Engine Outside 14 1726869 1
CAPSCREW, Hex Head, 5/16-24 x 3/4, G5 15 1921515 2
LOCKWASHER, Spring 5/16 16 1917356 2
WASHER, 5/16, 0.34 ID x 3/4 OD x .06 Thick 17 1919326 6
STOP, Belt 18 1731178 2
NUT, Hex Whiz Lock Flange, 5/16-18 19 2831277 5
CAPSCREW, Hex Head, 5/16-18 x 1-1/2, G5 21 1921221 3
ENGINE, 10.5HP B&S ES INTEK (Used on 24" Models) 24 1729715 1
ENGINE, 11.5HP B&S ES INTEK (Used on 28" Models) 24 1729717 1
ENGINE, 13HP B&S ES INTEK (Used on 32 & 38" Models) 24 1733313 1
HOSE, Oil Drain 25 1726942 1
COVER, Bottom Frame 26 1726870C 1
SCREW, Hex Washer Head Taptite, 1/4-20 x 1/2 27 1925003 2
SUPPORT, Tie Bar 28 1727004A 1
SCREW, Hex Whiz Lock Flange, 5/16-18 x 1-1/4 29 1930595 2
SCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 30 1664847 4
SCREW, Hex Whiz Lock Flange, 5/16-18 x 3/4 31 1930591 3
NUT, Speed, 5/16-18 Lug Type 1/4 /.15 32 1935255 2
FRAME ASSEMBLY 33 1726568C 1
NUT, Hex Keps, 1/4-20 Conical Washer 34 1960685 2
CAPSCREW, Hex Head, 5/16-18 x 1-3/4, G5 35 2822127 1
SUPPORT, Clutch Cable 37 1720404A 1
CARRIAGE BOLT, 1/4-20 x 3/4 38 1931317 2
SCREW, Truss Head Slotted, 5/16-18 x 3/4 39 1918249 2
LOCKWASHER, External Tooth, 5/16 40 2820426 2
COVER, Belt 41 1725287 1
SCREW, Hex Whiz Lock Flange, 3/8-16 x 1-3/4 42 2860709 1
PULLEY, Idler, 2-3/4 43 1726348 1
ROD & ARM ASSEMBLY, Clutch/Brake 44 1729646A 1
NUT, Hex Whiz Lock Flange, 3/8-16 45 1928352 1
SCREW, Hex Head, 3/8-16 x 1-1/2 .141 Thick 46 1960647 1
ARM, Idler 5-3/4 Long 47 1703046A 1
PULLEY, Idler 48 1668477 1
SPRING, Extension 49 2159106 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
9
TP 400-4433-00-LW-S
Engine & Frame Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
987510
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
10
TP 400-4433-00-LW-S
Engine & Frame Group
PART NO. DESCRIPTIONREF NO QTY.
PIN, Quick 50 1722460 2
GUARD, Muffler 51 1725664A 1
PIN, Flat 52 1665994 1
SPRING, Extension 53 1727149 1
NUT, Hex Centerlock 5/16-18 54 1923362 2
SCREW, Hex Washer Head Taptite, #10C x 1/2 55 1929477 3
NUT, Hex Whiz Lock Flange, 5/16-18 56 1927557 4
STOP, Belt 57 1702969 2
CORD, Electric Start 58 1724064 1
V-BELT 3L, Traction Drive 59 1672732 1
V-BELT HA, Auger Drive 60 1732249 1
NUT, Hex Toplock Jam, 3/8-16 66 1928731 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
11
TP 400-4433-00-LW-S
Auger Drive Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
987381
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
12
TP 400-4433-00-LW-S
Auger Drive Group
PART NO. DESCRIPTIONREF NO QTY.
AUGER ASSEMBLY, 24" Housing, R.H. 1 1733177A 1
AUGER ASSEMBLY, 28" Housing, R.H. 1 1733174A 1
AUGER ASSEMBLY, 32" Housing, R.H. 1 1733171A 1
AUGER ASSEMBLY, 38" Housing, R.H. 1 1731321A 1
AUGER ASSEMBLY, 24" Housing, L.H. 2 1733178A 1
AUGER ASSEMBLY, 28" Housing, L.H. 2 1733175A 1
AUGER ASSEMBLY, 32" Housing, L.H. 2 1733172A 1
AUGER ASSEMBLY, 38" Housing, L.H. 2 1731322A 1
CARRIAGE BOLT, 5/16-18 x 3/4, G5 5 1931333 1
NUT, Hex Whiz Lock Flange, 5/16-18 6 1931277 1
GEAR BOX ASSEMBLY (See Gear Box Assembly Group) 7 1732303 1
KEY, Woodruff, 3/16 x 5/8 #61 SAE 1035 8 2818312 2
IMPELLER ASSEMBLY, Large Frame Snow 10 1612187A 1
SCREW, Set Square Head Cup 3/8-16 x 1/2 G8 11 1960474 1
SET SCREW, Square Head Cup 5/16-18 x 1/2, G8 12 1928721 2
PULLEY, 9 OD 0.752ID .72 Wide w/Hub 13 1732468 1
BUSHING, 1.009ID x 1-1/8 OD x 1.13 Long Zytel 23 1709894 2
SHAFT, 0.98 Diameter 4.85 Long 24 1733104A 2
BUSHING, 1.009ID x 1-1/8 OD x 1 Long Zytel (Used only on 24, 28, & 32" Models) 25 1733754 2
PIN, Shear, .248 ID x 1-3/4 Long 27 1668344 4
COTTER PIN, 1/4" Self Locking 28 7023590 4
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
13
TP 400-4433-00-LW-S
Auger Housing & Chute Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
987430
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
14
TP 400-4433-00-LW-S
Auger Housing & Chute Group
PART NO. DESCRIPTIONREF NO QTY.
HOUSING ASSEMBLY, 24" 1 1732121C 1
HOUSING ASSEMBLY, 28" 1 1732296C 1
HOUSING ASSEMBLY, 32" 1 1732299C 1
HOUSING ASSEMBLY, 38" 1 1732271C 1
BLADE, Scraper for 24" 2 1709946A 1
BLADE, Scraper for 28" 2 1709947A 1
BLADE, Scraper for 32" 2 1709948A 1
BLADE, Scraper for 38" 2 1723921A 1
CARRIAGE BOLT, 5/16-18 x 3/4, G5 3 1931333 1
NUT, Hex Flange, 5/16-18 Two-Way Lock 4 1935048 9
CARRIAGE BOLT, 5/16-18 x 5/8, G5 5 1960699 9
DECAL, Orange Strip Hinge Snow Chute (Used on 24, 28, & 32" Models) 6 1706085 2
DECAL, Orange Strip Hinge Snow Chute (Used on 38" Models) 6 1733598 2
SKID SHOE (Used on 24, 28, & 32" Models) 8 1727854A 2
SKID SHOE (Used on 38" Models) 8 1725747A 2
CARRIAGE BOLT, 3/8-16 x 3/4, G5 (Used on 24, 28, & 32" Models) 9 1960711 4
CARRIAGE BOLT, 3/8-16 x 1, G5 (Used on 38" Models) 9 1960702 4
NUT, Hex Flange, 3/8-16 ESNA 10 1960687 4
CUTTER, Drift w/Tabs 11 1733102C 2
SCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 12 1664847 2
COVER, Gear, 38" 14 1729645A 1
MOTOR, Spout Rotator, 38/42" 15 1728965 1
PINION, 1.417 OD .296 Slot 1-1/4 Long 16T Powdered Metal 16 1728967 1
SCREW, Hex Washer Head Slot, #10C x 1-1/4, G2 17 2860604 5
NUT, Hex Whiz Lock Flange, #10-24 18 1960745 3
BEARING, 3/4 ID x 1.78 OD x .61 Long Greased 19 1729578 1
BEARING RETAINER 20 1665982A 1
RETAINER, Nut, 5/16-18 .057/.092 23 1930659 3
CABLE & KNOB ASSEMBLY 24 1720446 1
BRACKET, Chute Cable Snow, .179 Thick 25 1726411A 1
HOLD DOWN, Chute, Nylon 26 1666613 3
SCREW, Hex Washer Head Taptite, 10-14 x 5/8 27 1960001 3
NUT, Push Pal, 1/4 Diameter Stud Capped 28 1960126 2
WASHER, Nylon, .388 x 1.12 x .03 29 2860210 1
SCREW, Hex Washer Head Taptite, 1/4-20 x 3/8 30 1927428 1
NUT, Hex Flange, 5/16-18 ESNA 31 1960686 1
SPACER, .265 ID x .37 32 1702219 3
ROD, 5/16 Diameter 5.88 Long 33 1611945 1
SPRING, Compression 34 1611939 1
GEAR, Chute, 10 OD 6.65 ID .105 Thick 48 1717477A 1
CHUTE ASSEMBLY, with Pigtail Orange (Used on 24, 28, & 32" Models) 49 1733249C 1
CHUTE ASSEMBLY, with Pigtail Orange (Used on 38" Models) 49 1731433C 1
TIE, Self Locking, .184 Wide 7.31 Long 51 2825094 1
SCREW, Hex Whiz Lock Flange, 5/16-18 x 3/4 63 1960738 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
15
TP 400-4433-00-LW-S
Auger Housing & Chute Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
987430
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
16
TP 400-4433-00-LW-S
Auger Housing & Chute Group
PART NO. DESCRIPTIONREF NO QTY.
FLANGE, Bearing, 1.937 67 2172278A 1
CAPSCREW, Hex Head, 5/16-18 x 5/8, G5 68 1925205 1
BEARING, Ball, 1.002 ID 2.049 OD 1.09 Long 69 1733105 1
NUT, Hex Whiz Lock Flange, 5/16-18 70 1931277 1
STICK, Snow Cleanout w/Brush, Plastic 72 1733209 1
CLIP, Retainer 73 722242 1
NUT, Hex Lock, 10-24 w/Nylon Insert 74 1933896 1
BLOCK, Universal Pivot 75 724565 1
BOOT, Bellows 77 1611989 1
COLLET 78 1719140 1
SEAL, Rod 79 1719139 1
KNOB 80 1719138 1
SCREW, 8-32 81 1960600 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
17
TP 400-4433-00-LW-S
Traction Drive Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
987054
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
18
TP 400-4433-00-LW-S
Traction Drive Group
PART NO. DESCRIPTIONREF NO QTY.
SCREW, Hex Washer Head Taptite, 5/16-18 x 5/8 1 1930601 8
RETAINER, Bearing 2 1667341 4
BEARING, Ball 3 1722703 4
SHAFT, Hex 4 1726856 1
CAPSCREW, Hex Head, 5/16-18 x 3/4 G5 5 1921332 3
DISC, Friction with Insert 6 1725428 1
HUB, Friction Disc 7 1665995 1
NUT, Hex Keps, 5/16-18, Conical Washer 8 1960684 6
NUT, Hex Flange, 3/8-16 ESNA 9 1960687 1
ARM ASSEMBLY, Shift w/Bushing 10 1669256 1
BUSHING, 19/50 ID x 3/4 OD x 1-3/100 LG 11 1666114 1
WASHER, 3/8 12 1924940 1
CAPSCREW, Hex Head, 3/8-16 x 2 G5 13 1923701 1
SPRING, Extension 14 1668255 1
COLLAR, Thrust 15 1678956 2
PIN, Loop 16 1666207 1
COLLAR, Set 17 1667335 1
SCREW, Set Square Head Cup Point, 1/4-20 x 1/2 18 1724333 2
SPROCKET, 10 Tooth 19 1726931 1
WASHER, 5/8 20 2860164 4
JACKSHAFT, Double D 21 1718752 1
SPRING, Complete 22 1720298 1
CLUTCH, Sliding, 1/5LG, Powdered Metal 23 1718689 1
ARM, Clutch 24 1720078A 1
RING, Retaining Extension 25 2827732 1
WASHER, 3/4 26 1960114 3
GEAR, Stationary Clutch 27 1718688 1
SPACER, Heat Treated, 31/100 LG 28 1679556 1
SPROCKET 29 1667330 1
CHAIN, Roller 30 1666980 1
GEAR, Double D 31 1718687 1
CAPSCREW, Hex Head, 5/16-18 x 1 G5 32 1921333 3
NUT, Hex Flange, 5/16-18 ESNA 33 1960686 2
BELLCRANK 34 1700473 1
BUSHING, 11/32 ID x 3/4 OD x 1-3/50 LG 35 1666106 1
WASHER, 11/32 x 3/4 x 1/16 36 1919326 1
CAPSCREW, Hex Head, 5/16-18 x 1-3/4 G5 37 1922127 1
ROD, Pivot, 9-15/100 LG 38 1726467 1
PIN, Quick 39 1722460 1
SPRING, Extension 40 1725666 1
DRIVE DISC w/SPINDLE 41 1719879 1
KEY, Woodruff, 47/250 x 5/8 42 2818312 1
WASHER, 5/8 43 1924366 1
ARM, Pivot with Bushings & Bearings (Includes Ref. Nos 45, 46, 47 & 48) 44 1670849 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
19
TP 400-4433-00-LW-S
Traction Drive Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
987054
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
20
TP 400-4433-00-LW-S
Traction Drive Group
PART NO. DESCRIPTIONREF NO QTY.
BEARING, Ball 45 1665521 1
BUSHING, 3/4 ID x 1 OD x 3/4 LG, Powdered Metal 46 1666425 2
BUSHING, 5/8 ID x 13/16 OD x 3/4 LG, Powdered Metal 47 1666855 1
BUSHING, 377/100 ID x 1-13/100 OD x 1 LG, Powdered Metal 48 1666001 1
AXLE, Round 49 1720299 1
SCREW, Set Square Head Cup Point, 5/16-18 x 1/2 G8 50 1928721 2
PULLEY AND HUB ASSEMBLY 51 1672595A 1
WASHER 52 1919394 1
COLLAR, Set 53 1729254 1
GEAR AND HUB ASSEMBLY, RH 54 1720300 1
CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G8 55 1930570 1
FITTING, Lube 1/4-28, Tappered with Check Ball 56 2812808 1
GEAR AND HUB ASSEMBLY, with Bushings 57 1730228 1
WASHER, 1-47/250 58 2860169 1
BUSHING, 1-27/200 ID x 1-157/250 OD x 3/4 LG 59 1720305 1
RING, Retaining External #87 60 2172206 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
21
TP 400-4433-00-LW-S
Wheels & Tires Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
986549
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
22
TP 400-4433-00-LW-S
Wheels & Tires Group
PART NO. DESCRIPTIONREF NO QTY.
PIN, KLIK, Ring 1 1731186 2
WHEEL & TIRE ASSEMBLY, Snow R.H. (Used on 24 & 28" Models) 3 1726743 1
WHEEL & TIRE ASSEMBLY, Snow R.H. (Used on 32 & 38" Models) 3 1726745 1
VALVE STEM & CAP ASSEMBLY, Air 4 2172353 2
HUB, Wheel R.H., 3-3/4 Wide 8 Diameter 3/4 ID (Used on 24 & 28" Models) 5 1714242 1
HUB, Wheel, 5-3/8 Wide 8 Diameter 3/4 ID (Used on 32 & 38" Models) 5 1722762 1
TIRE, 4.80/4.00-8, X-TRAC TL (Used on 24 & 28" Models) 6 1727074 2
TIRE, 16 x 6.5-8 X-TRAC TL (Used on 32 & 38" Models) 6 1727075 2
WHEEL & TIRE ASSEMBLY, Snow L.H. (Used on 24 & 28" Models) 7 1726742 1
WHEEL & TIRE ASSEMBLY, Snow L.H. (Used on 32 & 38" Models) 7 1726744 1
HUB, Wheel L.H., 3-3/4 Wide 8 Diameter 1-1/8 ID (Used on 24 & 28" Models) 8 1720307 1
HUB, Wheel 5-3/8 Wide 8 Diameter 1-1/8 ID (Used on 32 & 38" Models) 8 1722761 1
TUBE, Tire 9 2153038 2
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
23
TP 400-4433-00-LW-S
Decal Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
987386
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
24
TP 400-4433-00-LW-S
Decal Group
PART NO. DESCRIPTIONREF NO QTY.
DECAL, Touch Up Paint, Orange, Black, Red 1 1720454 1
DECAL, OPEI Certified ANSI B71.3 2007 2 1733156 1
DECAL, Dashboard EZ Turn Channel Handles DOM 3 1726947 1
DECAL, 4 2 R1 Ground Speed R.H., LF 4 1733266 1
DECAL, 5 3 R2 Shift Pattern, L.H., LF 5 1733297 1
DECAL, Danger Amputation Hazard 2007 Snow 6 1733057 1
DECAL, Danger Avoid Injury from Auger 7 1716532 1
DECAL, Patent Snowthrower 8 1713056 1
DECAL, Simplicity Stripe 24" Long 2007 Snow 9 1733071 1
DECAL, Simplicity Stripe 28" Long 2007 Snow 9 1733072
DECAL, Simplicity Stripe 32" Long 2007 Snow 9 1733073
DECAL, Simplicity Stripe 38" Long 2007 Snow 9 1733074
STICKER, Serial w/Bar Code 2.19 x 3.68 2006 10 1731420 1
MYLAR OVERLAY, 2.18 x 3.68 3000/ROLL 11 1731389 1
DECAL, Signature Pro 10524P SMI Snow 15 1733269 1
DECAL, Signature Pro 11528P SMI Snow 15 1733268
DECAL, Signature Pro 1332P SMI Snow 15 1733267
DECAL, Signature Pro 1338P SMI Snow 15 1733265
DECAL, Power Boost, LF Snow (Not Shown) -- 1725507 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
25
TP 400-4433-00-LW-S
Gear Box Assembly
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
1732303
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
26
TP 400-4433-00-LW-S
Gear Box Assembly
PART NO. DESCRIPTIONREF NO QTY.
CAPSCREW, 1/4-20 x 2-1/2 1 1923282 1
CAPSCREW, 1/4-20 x 2-1/4 2 1960346 5
GEAR CASE, L.H. 3 1612136 1
TAPERED PIPE PLUG 4 1668971 1
GASKET 5 1612124 1
SHAFT, Auger Cutoff 6 1732440 1
SHAFT, Worm Cutoff 7 1732182 1
SEAL, Oil 8 1612093 2
FLANGE BUSHING 9 1612149 2
PIN, Drive Lock 10 2836098 1
THRUST COLLAR 11 1612127 1
ROLLED WORM CASE 12 1612142 1
THRUST WASHER 13 2168111 1
THRUST WASHER 14 2118315 2
GEAR, Worm 15 1612141 1
GEAR CASE, R.H. 16 1612137 1
NUT, Top Lock Flange 1/4-20 17 1930642 7
SEAL 18 2118118 1
WIREFORM BRACKET 19 1732152 1
KEY, Woodruff .18 x .62 20 2818312 1
BUSHING 21 1732991 2
TUBE 22 1612111 1
KEY, Woodruff 1/4 x 3/4 23 2830246 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695074 - P10524E
1695075 - P10524E
1695076 - P11528E
1695077 - P11528E
1695078 - P1332E
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695079 - P1332E
1695080 - P1338E
1695081 - P1338E
27
TP 400-4433-00-LW-S
Hardware Identification & Torque Specifications
Common Hardware Types
Hex Head Capscrew
Carriage Bolt
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is the
Nominal size
second number is present it represent the
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the
second number represents the
example, and the final number is the
bolt or screw (in this example 2 inches long).
, meaning the
Nominal size
inside diameter
, or
body diameter
threads per inch
body length
Washer
Lockwasher
Hex Nut
is 1/2 inch; if a
threads per inch
is 1/2 inch; the
(16 in this
of the
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4 3/4
1/2
Nut, 1/2”
Inside
Diameter
1
1/4 3/4
1/2
Screw, 1/2 x 2
2
1/4 3/4
1/2
3
1/4 3/4
1/2
4
Body
Diameter
Body
Length
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
Size Of
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
No
Marks
SAE Grade 2 SAE Grade 5 SAE Grade 8
in/lbs in/lbs
19
2.1
20
2.3
27
3.1
31
3.5
66
7.6 8 10.9 12 16.3
76
8.6 10 13.6 14 19.0
30
31
43
49
NOTES
3.4
3.5
4.9
5.5
in/lbs
41
43
60
68
420 571.2
4.6
4.9
6.8
7.7
Wrench & Fastener Size Guide
1/4
1/4” Bolt or Nut
Wrench—7/16”
5/16
5/16” Bolt or Nut
Wrench—1/2”
3/8
3/8” Bolt or Nut
Wrench—9/16”
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2
DIA.
1/2” Bolt or Nut
Wrench—3/4”
MANUFACTURING, INC.
500 N. Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
www.simplicitymfg.com
Briggs and Stratton Yard Power Products Group
2006Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
Loading...