Simplicity 1694850, 1694848, 1694915, 1694852, 1694849 User Manual
...
Parts Manual
Large Frame
Walk-Behind Snowthrowers
9.5HP Snowthrowers
Mfg. No. Description
1694867 9560E, 9.5HP Snowthrower
1694914 9560EX, 9.5HP Snowthrower (CE)
10.5HP Snowthrowers
Mfg. No. Description
1694847 10560E, 10.5HP Snowthrower
1694848 10560EX, 10.5HP Snowthrower (CE)
11.5HP Snowthrowers
Mfg. No. Description
1694849 11570E, 11.5HP Snowthrower
1694850 E11570, 11.5HP Snowthrower (CE)
13HP Snowthrowers
Mfg. No. Description
1694851 1380E, 13HP Snowthrower
1694852 E1380, 13HP Snowthrower (CE)
1694872 1390E, 13HP SnowThrower
1694915 1390EX, 13HP SnowThrower (CE)
Rev.
1732356
11/2005
Part No.:
TP 400-4250-00-LW-S
Table Of Content
s
PRODUCT COMPONENTS PAGES
Handles and Controls Group - Channel ..............................................................................................................
Handles and Controls Group ...............................................................................................................................
Engine and Frame Group ....................................................................................................................................
Engine and Frame Group with Power Boost .......................................................................................................
Auger and Impeller Group ....................................................................................................................................
Auger Housing and Chute Group - 24, 28 & 32 inch ...........................................................................................
Auger Housing and Chute Group - 38" Models ...................................................................................................
Traction Drive Group ............................................................................................................................................
Wheels & Tires Group ..........................................................................................................................................
Decal Group .........................................................................................................................................................
Headlight Group ...................................................................................................................................................
12
16
20
24
28
32
36
38
40
Torque Specification Chart ..................................................................... Inside Back Cover
4
8
Handles and Controls Group - Channel
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
Linkage adjustment for traction and
auger drive with power boost: with
drive levers engaged, the bottom end of
lower rods (Ref. 40 & 66) should be flush
with bottom of springs (Ref. 39 & 68).
64
56
66
65
63
62
62
56
61
To engine
60
59
To headlight
To engine
plug
ground
1
3
69
71
Shift rod assembly
(Ref. 71) must pivot
freely on pivot blocks
(Ref. 21).
56
See Auger Housing and
58
To spout
motor
2
4
72
4
4
70
69
68
67
Mount clutch cable
to cable support, see
Engine & Frame.
Chute Group - 38"
53
55
56
57
8
5
7
6
21
Mount bushin gs (Ref . 78)
with flange on inside of
brackets, 3 places.
54
Slot towards
rear of unit.
10
9
12
28
2727
Torque to
19 - 29 ft-lbs.
44
49
39
15
14
39
16
987044
11
12
13
17
18
19
20
12
26
35
34
33
36
39
43
42
44
42
48
47
50
51
52
22
96
4
25
29
The holes in the frame for Ref. 51 are
slotted so the gear support (Ref. 45) can
be positioned to ensure the inside surface
of the gear support is tight against the
hub of the front gear (Ref. 50).
23
4
5
30
32
34
45
46
24
38
31
41
39
40
37
The above parts group applies to the following Mfg. Nos.:
1694847 - 10560E
1694848 - 10560EX
1694849 - 11570E
1694850 - E11570
1694851 - 1380E
1694852 - E1380
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2005
1694872 - 1390E
1694915 - 1390EX
4
TP 400-4250-00-LW-S
Handles and Controls Group - Channel
PART NO. DESCRIPTIONREF NO QTY.
1 1727128 1 HANDLE, Clutch R.H.
2 1668608 2 GRIP, Handle Clutch, Black
3 1928732 1 CAPSCREW, Hex Washer Head Taptite #10-24 x 1
4 1729104 5 BUSHING, 1/2 ID x 3/4 OD x 1/4, Plastic
5 1725205A 2 LEVER & TUBE ASSEMBLY, Clutch
6 1960471 4 CAPSCREW, Hex Washer Head Taptite #12-24 x 1
7 1705899 1 GUIDE, Control
8 1726317 2 GRIP, Black Soft 1 in. (24 in. & 28 in. Models Only)
9 1723965 2 HAND GRIP, Heated 1 in. (32 & 38 in. Models Only)
10 1667800C 1 DASHBOARD
11 1724489 1 PLUG, Button (38 in. Models Only)
12 1925592 6 CAPSCREW, Hex Washer Head Taptite 1/4-20 x 3/4
13 1930641 4 NUT, Hex Flange Whiz Lock 1/4-20
14 1935450 4 CAPSCREW, Hex Washer Head, 1/4-20 x 3/4 G5
15 1933689 1 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 1-1/2
16 1678579 1 SPACER, 21/64 ID x 13/16 OD x 15/16
17 1705898 1 LATCH, Control
18 1701342 1 SPRING, Compression
19 1960686 1 NUT, Hex Flange 5/16-18 ESNA
20 1729855C 1 HANDLE ASSEMBLY, Channel
21 1723935A 1 BRACKET, Shift Control
22 1718791 1 CABLE & HANDLE ASSEMBLY, Clutch L.H.
23 1677453 1 ROD, Control 2 in. Flat
24 1727127 1 HANDLE, Clutch L.H.
25 1725702 1 SCREW, Pan Head Torx #10 x 1/2 Thick Cut
26 1664022 1 GROMMET, 1/2
27 2834683 1 CLIP, Wire
28 1933896 1 NUT, Hex Lock 10-24 with Nylon Insert NC3B (Quantity 3 used no 32 in. models)
29 1678392 1 SPACER, 17/64 ID x 3/8 OD x 21/64
30 1726728 1 CLIP, Clean Out Tool
31 1960589 1 SCREW, Phillips #10-24 x 3/4
32 7075909 1 TOOL, Clean Out
33 1726727A 1 BRACKET, Clean Out Tool
34 1960729 6 CAPSCREW, Hex Serrated Flange Tap, 5/16-18 x 1
35 1728115 1 CABLE ASSEMBLY, LH (Includes Ref. No. 36)
36 1707452 1 SPRING, Extension 3-11/32 Long
37 1960093 1 NUT, Push Pal (Used on all models Except 38 in. Models)
38 1714084 1 KNOB, Spinner, Soft (Used on all modles Except 38 in. Models)
39 1667588 4 BUSHING, 3/8 ID x 7/16 OD x 13/64, Nylon (Used on all models Except 38 in. Models)
40 1715658 1 ROD, Chute Control, 27 in. Long (Used on all models Except 38 in. Models)
41 1718793 1 SUPPORT, Gear (Used on all models Except 38 in. Models)
42 1718593 2 GEAR, Powered Metal (Used on all models Except 38 in. Models)
43 1918452 1 PIN, Cotter 1/8 x 1 (Used on all models Except 38 in. Models)
44 2816168 2 PIN, Spring 1/8 x 3/4 (Used on all models Except 38 in. Models)
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694847 - 10560E
1694848 - 10560EX
1694849 - 11570E
1694850 - E11570
1694851 - 1380E
1694852 - E1380
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2005
1694872 - 1390E
1694915 - 1390EX
5
TP 400-4250-00-LW-S
Handles and Controls Group - Channel
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
Linkage adjustment for traction and
auger drive with power boost: with
drive levers engaged, the bottom end of
lower rods (Ref. 40 & 66) should be flush
with bottom of springs (Ref. 39 & 68).
64
56
66
65
63
62
62
56
61
To engine
60
59
To headlight
To engine
plug
ground
1
3
69
71
Shift rod assembly
(Ref. 71) must pivot
freely on pivot blocks
(Ref. 21).
56
See Auger Housing and
58
To spout
motor
2
4
72
4
4
70
69
68
67
Mount clutch cable
to cable support, see
Engine & Frame.
Chute Group - 38"
53
55
56
57
8
5
7
6
21
Mount bushin gs (Ref . 78)
with flange on inside of
brackets, 3 places.
54
Slot towards
rear of unit.
10
9
12
28
2727
Torque to
19 - 29 ft-lbs.
44
49
39
15
14
39
16
987044
11
12
13
17
18
19
20
12
26
35
34
33
36
39
43
42
44
42
48
47
50
51
52
22
96
4
25
29
The holes in the frame for Ref. 51 are
slotted so the gear support (Ref. 45) can
be positioned to ensure the inside surface
of the gear support is tight against the
hub of the front gear (Ref. 50).
23
4
5
30
32
34
45
46
24
38
31
41
39
40
37
The above parts group applies to the following Mfg. Nos.:
1694847 - 10560E
1694848 - 10560EX
1694849 - 11570E
1694850 - E11570
1694851 - 1380E
1694852 - E1380
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2005
1694872 - 1390E
1694915 - 1390EX
6
TP 400-4250-00-LW-S
Handles and Controls Group - Channel
PART NO. DESCRIPTIONREF NO QTY.
45 1960518 2 NUT, Push for 1/4 Diameter Thread
46 1960252 2 CARRIAGE BOLT, 1/4-20 x 5/8 G5 (Used on all models Except 38 in. Models)
47 1960294 2 NUT, Hex Flange Whiz Lock, 1/4-20 Small (Used on all models Except 38 in. Models)
48 1725283 1 ROD, Chute Worm, 18 Long (Used on all models Except 38 in. Models)
49 1668186 1 WORM, Chute, L.H. (Used on all models Except 38 in. Models)
50 1611911 1 SUPPORT, Worm (Used on all models Except 38 in. Models)
51 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4 G5 (Used on all models Except 38 in. Models)
52 1960684 1 NUT, Hex KEPS Conical Washer, 5/16-18 (Used on all models Except 38 in. Models)
53 1723967 1 SWITCH, Hand Warmer (32 & 38 in. Models Only)
54 1923341 1 CAPSCREW, Hex Head, 1/4-20 x 3/4 G5 (32 & 38 in. Models Only)
55 1724037 1 RESISTOR BLOCK, Male Terminal (32 & 38 in. Models Only)
56 1960685 4 NUT, Hex KEPS, 1/4-20 Conical Washer
57 2172434 1 CLIP, Wire (Spout Rotator Models Only)
58 1725439 1 HARNESS, Wiring (Handwarmer Models Only)
58 1728968 1 HARNESS, Wiring (Handwarmer & Spout Rotator Models Only)
59 2825094 3 TIE, Self Locking 7-5/16 (32 & 38 in. Models Only)
60 1722460 1 PIN, Quick
61 1666255 1 ROD, Lower Shift 15-21/64 Long
62 1931317 2 CARRIAGE BOLT, 1/4-20 x 3/4 G5
63 1726304 1 ROD, Upper Shift 11-3/8 Long
64 1728114 1 CABLE ASSEMBLY, RH
65 1713844 1 KNOB, Hole
66 1714120 1 ROD & CLEVIS ASSEMBLY, Shift
67 1960705 1 CAPSCREW, Hex Flange Whiz Lock 1/4-20 x 2-1/4
68 1668681 1 WASHER, Curved
69 1668524 2 BLOCK, Pivot, Powdered Metal
70 1924361 1 WASHER, 1/2
71 1674567 1 ROD & ARM ASSEMBLY, Pivot
72 1960074 1 CLIP, Hair Pin
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694847 - 10560E
1694848 - 10560EX
1694849 - 11570E
1694850 - E11570
1694851 - 1380E
1694852 - E1380
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2005
1694872 - 1390E
1694915 - 1390EX
7
TP 400-4250-00-LW-S
Handles and Controls Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
7
5
3
4
2
1
987161
8
9
10
6
69
68
58
61
67
62
61
60
Apply adhesive to
secure grips.
11
13
Insert shift rod (Ref. 65)
into outter hole of Ref. 68.
67
70
35
71
66
65
64
12
15
16
17
14
21
20
19
18
60
25
72
1630
Must slide freely in
22
dash assembly (Ref 18).
Apply lubricant as required.
28
23
24
26
11
27
33
52
Mount b ushin gs (Ref . 19)
with flange on inside of
brack ets, 3 p laces.
53
54
19
63
Shift rod assembly (Ref. 66)
61
must pivot freely on
49
51
52
59
19
Slot toward s
rear of unit.
pivot blocks, (Ref. 67).
45
46
47
48
The hol es in the frame for Ref. 48 are
slotted so the gear support (Ref. 46) can
be positioned to ensure the inside surface
of the g ear supp ort is tight against the
hub of the front gear (Ref. 56).
44
60
58
57
56
53
56
19
55
50
31
43
29
Must pivot freely
on capscrew (Ref 32).
39
40
Apply lubricant as required.
42
29
32
35
36
38
41
34
37
The above parts group applies to the following Mfg. Nos.:
1694867 - 9560E
1694914 - 9560EX
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2005
8
TP 400-4250-00-LW-S
Handles and Controls Group
PART NO. DESCRIPTIONREF NO QTY.
1 1726833 1 CABLE AND SPRING ASSEMBLY, R.H. Auger
2 1731334A 1 HANDLE, Tube, R.H.
3 1922127 1 CAPSCREW, Hex Head, 5/16-18 x 1-3/4 G5
4 1921221 3 CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G5
5 1960671 2 SCREW, Pan Head Torx, 1/4-20 x 3/4, Thread Cutting
6 1715654 2 SPACER, 1/4ID x 25/64OD x 11/64LG
7 1922837 2 CAPSCREW, Hex Head, 1/4-20 x 1-1/2 G5
8 1722638 1 HANDLE, Clutch R.H.
9 1715655 2 SPACER
10 1923358 2 NUT, Hex Centerlock, 1/4-20
11 1726317 2 GRIP
12 1723965 2 HAND GRIP, Heated 1" Diameter
13 1923341 3 CAPSCREW, Hex Head 1/4-20 x 3/4 G5
14 1724037 1 RESISTOR BLOCK, 2 Male Terminal
15 1723967 1 SWITCH, Hand Warmer
16 1728968 1 HARNESS, Wiring
17 1715956 1 CLIP, Wire
18 1726983A 1 DASH AND SUPPORT ASSEMBLY, Tubular
19 1667588 4 BUSHING, 47/125ID x 437/1000OD x 1/5LG
20 1714084 1 KNOB, Spinner
21 1960093 1 NUT, Push Pal, 3/8" Diameter Stud Capped
22 1722690 1 SPRING, Complete
23 1722633 1 ROD AND SPRING ASSEMBLY, w/Pin (Includes Ref. No. 24)
24 1960519 1 PUSH NUT, Stud Cap, 1/2
25 1722630 1 ROD, 4/25" Diameter, E-Coat
26 1722667 1 HANDLE, Clutch L.H.
27 1731333A 1 HANDLE, Tube, L.H.
28 1960662 1 CAPSCREW, Hex Head, 1/4-20 x 2 G5
29 1920397 2 NUT, Hex Lock ESNA Light, 1/4-20NC-3B
30 1921319 2 WASHER, 1/4
31 1933896 1 NUT, Hex Lock, 10-24
32 1722631A 1 LEVER, Pivot
33 1718791 1 CABLE AND HANDLE ASSEMBLY, Clutch
34 1725702 1 SCREW, Pan Head Torx, #10 x 1/2 Thread Cut
35 1726995 1 SPACER, 1-1/4 LG Beveled End
36 1726728 1 CLIP, Snow Stick
37 1960727 1 SCREW, Hex Flange Slot, #10-24 x 2-1/2
38 7075909 1 STICK, Snow Removal
39 1720452 2 CLAMP, Saddle Snow Handle E-Coat
40 1726727A 1 BRACKET, Clean Out Tool
41 1960730 2 CAPSCREW, Hex Head Serrated Flange Taptite, 5/16-18 x 2 G5
42 1960729 1 CAPSCREW, Hex Whiz Lock Flange, 5/16-18 x 1
43 1726832 1 CABLE AND SPRING ASSEMBLY, L.H. Traction (Includes Ref. No. 44)
44 1707452 1 SPRING, Extension
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694867 - 9560E
1694914 - 9560EX
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2005
9
TP 400-4250-00-LW-S
Handles and Controls Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
7
5
3
4
2
1
987161
8
9
10
6
69
68
58
61
67
62
61
60
Apply adhesive to
secure grips.
11
13
Insert shift rod (Ref. 65)
into outter hole of Ref. 68.
67
70
35
71
66
65
64
12
15
16
17
14
21
20
19
18
60
25
72
1630
Must slide freely in
22
dash assembly (Ref 18).
Apply lubricant as required.
28
23
24
26
11
27
33
52
Mount b ushin gs (Ref . 19)
with flange on inside of
brack ets, 3 p laces.
53
54
19
63
Shift rod assembly (Ref. 66)
61
must pivot freely on
49
51
52
59
19
Slot toward s
rear of unit.
pivot blocks, (Ref. 67).
45
46
47
48
The hol es in the frame for Ref. 48 are
slotted so the gear support (Ref. 46) can
be positioned to ensure the inside surface
of the g ear supp ort is tight against the
hub of the front gear (Ref. 56).
44
60
58
57
56
53
56
19
55
50
31
43
29
Must pivot freely
on capscrew (Ref 32).
39
40
Apply lubricant as required.
42
29
32
35
36
38
41
34
37
The above parts group applies to the following Mfg. Nos.:
1694867 - 9560E
1694914 - 9560EX
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2005
10
TP 400-4250-00-LW-S
Handles and Controls Group
PART NO. DESCRIPTIONREF NO QTY.
45 1727088 1 ROD, 3/8" Diameter, 26"LG, E-Coat
46 1718793 1 SUPPORT, Gear
47 1960518 2 NUT, Push for 1/4 Diameter Thread
48 1960252 2 CARRIAGE BOLT, 1/4-20 x 5/8 G5
49 1960294 2 NUT, Hex Flange, 1/4-20, Whiz Lock Small
50 1611911 1 SUPPORT, Worm
51 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4 G5
52 1960684 2 NUT, Hex Keps, 5/16-18, Conical Washer
53 2816168 2 PIN, Spring 1/8 x 3/4
54 1668186 1 WORM, Chute, L.H.
55 1725283 1 ROD, 3/8" Diameter, Chute Worm E-Coat
56 1718593 2 GEAR, Powdered Metal, Metafusion
57 1918452 1 PIN, Cotter 1/4 x 1
58 1722460 1 PIN, Quick
59 1666255 1 ROD, 3/4" Diameter
60 1960685 3 NUT, Hex KEPS, 1/4-20, Conical Washer
61 1931317 2 CARRIAGE BOLT, 1/4-20 x 3/4 G5
62 1726304 1 ROD, 3/4" Diameter, Shift Upper E-Coat, 11-19/50LG
63 1726734 1 KNOB, Intermediate Thread, 3/8-16
64 1960705 1 SCREW, Hex Whiz Lock Flange, 1/4-20 x 2-1/4
65 1668523 1 ROD AND CLEVIS ASSEMBLY, Shift, Threaded
66 1924361 1 WASHER, 1/2
67 1668524 2 BLOCK, Pivot, 3/4 x 3/4, Powdered Metal
68 1720240 1 ROD AND ARM ASSEMBLY, Pivot
69 1715123 1 SPRING, Torsion
70 1960074 1 CLIP, Hair Pin
71 1668185 2 BUSHING, 1/2ID x 3/4OD x 1/4LG
72 1960686 4 NUT, Hex Flange, 5/16-18 ESNA
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694867 - 9560E
1694914 - 9560EX
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2005
11
TP 400-4250-00-LW-S
Engine and Frame Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
Long hub of idler
pulley (Ref. 3) to
1
be toward idler
3
2
9
arm (Ref. 6).
Position idler pulley (Ref. 12)
at center of slot in clutch arm
(Ref. 10).
12
11
10
4
8
7
6
5
987035
15
19
13
16
14
8
1430
31
29
32
33
17
Hook one end of spring (Ref. 14)
18
over clutch rod assembly (Ref. 10)
between tabs and other end onto
the tube handle capscrew (Ref. 20).
20
21
22
23
24
25
25
26
27
Hook one end of spring (Ref. 7)
into top hole of roller arm (Ref. 6)
and other end into top hole of the idler
arm assembly in the Traction Drive Group.
50
49
48
47
46
45
Torque to
10-14 ft. lbs. or
14-20 N m
3544
3542
3543
The above parts group applies to the following Mfg. Nos.:
1694867 - 9560E
1694914 - 9560EX
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2005
41
Right rear bo lt.
12
40
29
37
36
37
38
Torque (4) Engine
Bolts to 17 - 21 ft. lbs.
or 23 - 29 N m
39
28
34
35
TP 400-4250-00-LW-S
Engine and Frame Group
PART NO. DESCRIPTIONREF NO QTY.
1 1700415 1 MV-BELT, 3L
2 1928731 1 NUT, Hex, Toplock, Jam, 3/8-16
3 1668477 4 PULLEY, Idler
4 1960647 1 SCREW, Hex Head, 3/8-16 x 1-1/2
5 1665994 1 PIN, Flat Head Drilled
6 1703046A 1 ARM, Idler, 5-3/4 LG
7 1727149 1 SPRING, Extension
8 1722460 2 PIN, Quick
9 1701257 1 V-BELT, HA
10 1729646A 1 ROD AND ARM ASSEMBLY, Clutch, Brake
11 1928352 1 NUT, Hex Flange, 3/8-16 Whiz Lock Large
12 1726348 1 PULLEY, Idler
13 2860709 1 CAPSCREW, Hex Whiz Lock Flange, 3/8-16 x 1-3/4
14 2159106 1 SPRING, Extension, 4-1/4 Long
15 1725287 1 COVER, Belt
16 1935255 2 NUT, Speed, 5/16-18, Lug Type
17 2820426 2 LOCKWASHER, External Tooth, 5/16
18 1918249 2 SCREW, Truss head Slotted, 5/16-18 x 3/4
19 1724064 1 CORD, Electric Extension
20 1921221 1 CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G5
21 1726568C 1 FRAME ASSEMBLY, Chain/Tube Handles
22 1931317 2 CARRIAGE BOLT, 1/4-20 x 3/4 G5
23 1960685 2 NUT, Hex KEPS, 1/4-20, Conical Washer
24 1720404A 1 SUPPORT, Clutch Cable, 16GA
25 1930591 4 SCREW, Hex Whiz Lock Flange, 5/16-18 x 3/4
26 1664847 4 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4
27 1726870C 1 COVER, Bottom Frame, 20GA
28 1925003 2 SCREW, Hex Washer Head Taptite, 1/4-20 x 1/2
29 1727004A 1 SUPPORT, Tie Bar
30 1927557 4 NUT, Hex Flange, 5/16-18, Whiz Lock Large
31 1929477 3 SCREW, Hex Washer Head Taptite, #10-24 x 1/2
32 1725664A 1 GUARD, Muffler, 18GA
33 * 1 ENGINE, 9.5HP B&S Electric Start Engine Model: 20A414 Engine Type: 0111E1
33 * 1 ENGINE, 9.5HP B&S Electric Start Engine (CE Models) Model: 20A414 Engine Type:
0113E1
34 1726942 1 HOSE, Oil Drain, w/Fittings
35 1727033 1 SCREW, Muffler Deflector
36 1727032 1 DEFLECTOR, Rain Guard, B&S Snow Muffler
37 2831277 4 NUT, Hex Flange, 5/16-18, Whiz Lock Small
38 1725326A 4 SUPPORT, Engine Riser, 3/8" Thick, 1-1/4 x 4-31/50
39 1935159 3 CAPSCREW, Hex Whiz Lock Flange, 5/16-18 x 2-1/4
40 2821719 1 CAPSCREW, Hex Head, 5/16-18 x 2-1/2 G5
41 1727785 1 STOP, Belt
42 1919326 2 WASHER, 5/16
43 1917356 2 LOCKWASHER, Spring, 5/16
Footnotes
* See your local Briggs & Stratton distributor for Parts & Service.
The above parts group applies to the following Mfg. Nos.:
1694867 - 9560E
1694914 - 9560EX
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2005
13
TP 400-4250-00-LW-S
Engine and Frame Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
Long hub of idler
pulley (Ref. 3) to
1
be toward idler
3
2
9
arm (Ref. 6).
Position idler pulley (Ref. 12)
at center of slot in clutch arm
(Ref. 10).
12
11
10
4
8
7
6
5
987035
15
19
13
16
14
8
1430
31
29
32
33
17
Hook one end of spring (Ref. 14)
18
over clutch rod assembly (Ref. 10)
between tabs and other end onto
the tube handle capscrew (Ref. 20).
20
21
22
23
24
25
25
26
27
Hook one end of spring (Ref. 7)
into top hole of roller arm (Ref. 6)
and other end into top hole of the idler
arm assembly in the Traction Drive Group.
50
49
48
47
46
45
Torque to
10-14 ft. lbs. or
14-20 N m
3544
3542
3543
The above parts group applies to the following Mfg. Nos.:
1694867 - 9560E
1694914 - 9560EX
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2005
41
Right rear bo lt.
14
40
29
37
36
37
38
Torque (4) Engine
Bolts to 17 - 21 ft. lbs.
or 23 - 29 N m
39
28
34
35
TP 400-4250-00-LW-S
Loading...