Page 1
Parts Manual
Hydro Cut
Series Walk-Behind Mowers
13HP Product
Mfg. No. Description
1694562 Hydro Cut, 13HP Kawasaki, 32 inch (CE)
06/2004
Rev.
TP 400-4077-01-HC-S
Page 2
Page 3
Table Of Content
s
PRODUCT COMPONENTS PAGES
Engine Deck & Handle Bars Group .....................................................................................................................
Engine, PTO & Deck Drive Idler Group ...............................................................................................................
Transaxle, Mount & Drive Idler Group .................................................................................................................
Transaxle SERVICE PARTS ...............................................................................................................................
Controls Group .....................................................................................................................................................
Electrical Group ....................................................................................................................................................
Fuel Tank Group ..................................................................................................................................................
Fuel Tank Supply Group ......................................................................................................................................
Wheel & Tire Group .............................................................................................................................................
Decals - Brand, Model, Safety & Instruction ........................................................................................................
32 inch Mower Deck - Frame, Caster & Shield ...................................................................................................
32 inch Mower Deck - Height Adjustment ...........................................................................................................
32 inch Mower Deck - Housing, Arbors & Blades ...............................................................................................
10
12
14
16
18
20
22
24
26
28
Torque Specification Chart ..................................................................... Inside Back Cover
4
6
8
Page 4
Engine Deck & Handle Bars Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
See Motion Control,
Parking Brake and
Operator Presence Group
16
FI0031
1
4
5
2
6
7
8
3
9
22
10
11
12
15
14
13
See Motion Control,
Parking Brake and
Operator Presence Group
See Fuel Tank
& Mount Group
21
20
17
18
17
19
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
4
TP 400-4077-01-HC-S
Page 5
Engine Deck & Handle Bars Group
PART NO. DESCRIPTIONREF NO QTY.
1 5022180 1 SWITCH, PTO
2 5022222 1 SWITCH RETAINER RING
3 5025035 1 NUT, Hex, 3/8-24
4 5046501 1 CABLE, Choke Control
5 50250106 2 CAPSCREW, Hex Head, 1/4-20 x 3/4
6 5021842 1 SWITCH, Ignition, Complete (Includes Ref 7 - 9)
7 5022789 1 KEY, Ignition, Molded (set of 2)
8 5022790 1 COVER
9 5022791 1 PLASTIC NUT
10 5047629 1 CABLE, Throttle Control
11 5021841 2 FOAM GRIP
12 5025095 2 NUT, Hex Nylon Lock, 1/4-20
13 503847905 1 HANDLE BAR ASSEMBLY, (Orange)
14 50251794 2 SCREW, Phillips Head, #10-24 x 1/2
15 5021769 1 SWITCH, NC
16 5025029 2 NUT, Hex, #10-24
17 5022308 4 BODY CLIP, 5/16-18
18 503847735 1 REAR SHIELD, (Orange)
19 50250116 4 CAPSCREW, Hex Head, 5/16-18 x 3/4
20 5025155 4 WASHER, 5/16
21 503848230 1 ENGINE DECK ASSEMBLY, (Orange)
22 5048474 1 THROTTLE STOP PLATE
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
5
TP 400-4077-01-HC-S
Page 6
Engine, PTO & Deck Drive Idler Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
23
22
21
20
25
19
24
FI0032
1
26
27
Muffler Clamp
& Hardware
20
19
19
28
2
25
5
See Transaxle, Mount
& Drive Idler Group
17
16
18
15
19
14
4
5
13
3
5
4
6
7
6
8
9
10
11
12
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
6
TP 400-4077-01-HC-S
Page 7
Engine, PTO & Deck Drive Idler Group
PART NO. DESCRIPTIONREF NO QTY.
1 * 1 ENGINE, 13HP Kawasaki, Model FH381V
1 50211783 1 FUEL FILTER
1 50213341 1 OIL FILTER (49065-2078)
1 * 1 PRE-CLEANER (11013-7016)
1 * 1 AIR FILTER (11013-7017)
1 * 1 MUFFLER (49070-7002)
1 * 1 EXHAUST MANIFOLD (18088-7001)
1 * 1 MANIFOLD HEAT SHIELD (13271-7022)
1 * 2 EXHAUST MANIFOLD GASKET (11060-7021)
1 * 1 RECOIL ASSEMBLY, Complete (49088-7001)
2 5021379 1 GROMMET
3 5021103 1 SPRING, Extension
4 502501112 5 CAPSCREW, Hex Head, 5/16-18 x 1-1/2
5 5025139 4 NUT, Hex Serrated Flange, 5/16-18
6 5020876B 2 BUSHING, Brass
7 503847661 1 DECK DRIVE IDLER ARM, (Orange)
8 5025160 1 WASHER, 3/4
9 5020863 1 C-CLIP
10 5021369 1 IDLER PULLEY
11 5025158 1 WASHER, 1/2
12 502501820 1 CAPSCREW, Hex Head, 1/2-20 x 2-1/2
13 5025098 1 NUT, Hex Nylon Lock, 1/2-20
14 5047632 1 CRANKSHAFT BOLT, 7/16 x 2-3/4
15 5042132 1 CLUTCH RETAINER
16 1717664 1 ELECTRIC CLUTCH
17 50504073 1 KEY, 1/4 Sq. x 2
18 502501118 1 CAPSCREW, Hex Head, 5/16-18 x 2-1/4
19 5025155 7 WASHER, 5/16
20 50250116 2 CAPSCREW, Hex Head, 5/16-18 x 3/4
21 5023173 1 CLAMP
22 5025127 1 NUT, Hex Serrated Flange, 5/16-18
23 5050857105 1 HOSE, 10-1/2 inch (oil drain)
24 5021392 1 CLAMP, #6 Hose
25 5025057 6 NUT, Hex Nylon Lock, 5/16-18
26 502514614 1 CARRIAGE BOLT, 5/16-18 x 1-3/4
27 502849338 1 MUFFLER GUARD
28 502849340 1 BRACKET
Footnotes
* See your local Kawasaki engine dealer for parts & service.
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
7
TP 400-4077-01-HC-S
Page 8
Transaxle, Mount & Drive Idler Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
21
22
17
18
17
1
20
19
13
FI0033
2
2
3
6
3
3
4
5
3
5
3
7
2
3
3
6
16
12
15
9
10
13
Idler Pulley
14
Engine Pulley
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
11
3
9
Transaxle Pulley
8
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
8
TP 400-4077-01-HC-S
Page 9
Transaxle, Mount & Drive Idler Group
PART NO. DESCRIPTIONREF NO QTY.
1 5025096 1 NUT, Hex Nylon Lock, 3/8-16
2 5025057 7 NUT, Hex Nylon Lock, 5/16-18
3 5025155 12 WASHER, 5/16
4 503847582 1 TRANSAXLE BRACE, (Orange)
5 50250596 2 CAPSCREW, Hex Head, Self-Tapping, 5/16-18 x 3/4
6 50250116 3 CAPSCREW, Hex Head, 5/16-18 x 3/4
7 503848312 1 SKID PLATE, (Orange)
8 5022967 1 HYDRO RETURN SPRING
9 502501124 4 CAPSCREW, Hex Head, 5/16-18 x 3
10 5022905 1 HYDROSTATIC TRANSAXLE
11 5023058 1 BELT, Drive
12 5020807 1 SPRING, Extension
13 5025100 2 NUT, Hex Side Lock, 3/8-16
14 502501324 1 CAPSCREW, Hex Head, 3/8-16 x 3
15 5025165 2 WASHER, Fender, 3/8
16 5047716 1 SPACER
17 5020876B 2 BUSHING, Brass
18 503847717 1 TRANSAXLE IDLER ARM, (Orange)
19 5043627 1 IDLER PULLEY ASSEMBLY
20 5025156 1 WASHER, 3/8
21 502501316 1 CAPSCREW, Hex Head, 3/8-16 x 2
22 5047914 1 TRANSAXLE DRIVE PULLEY
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
9
TP 400-4077-01-HC-S
Page 10
Transaxle SERVICE PARTS
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5022905
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
10
TP 400-4077-01-HC-S
Page 11
Transaxle SERVICE PARTS
PART NO. DESCRIPTIONREF NO QTY.
6 50229051 10.5 SEALANT
9 50229052 1 SHAFT, INPUT
10 50229053 1 RING - RETAINING
11 50229054 1 SPACER
12 50229055 3 RING - RETAINING
14 50229056 1 BALL BEARING
32 50229057 2 OUTBOARD SLEEVE BEARING
35 50229058 1 AXLE SHAFT - RH
36 50229059 1 AXLE SHAFT - LH
55 502290510 1 SPRING - HELICAL COMPRESSION
56 502290511 1 WASHER
57 502290512 78.8 20W-50 OIL
101 5022967 1 HYDRO RETURN SPRING
119 502290513 1 FAN, 6”, 10 BLADE
128 502290514 1 EXPANSION TANK KIT
130 502290515 1 FAN/PULLEY KIT (includes Ref. 119)
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
11
TP 400-4077-01-HC-S
Page 12
Controls Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
1
3
4
5
FI0034
2
6
7
12
16
9
11
8
13
15
14
10
15
14
19
17
13
18
12
10
22
20
2
9
21
3
5
4
14
12
27
14
15
12
13
32
26
13
31
15
33
16
13
15
34
12
14
13
30
8
15
16
36
35
7
14
29
14
24
16
15
13
12
26
27
28
23
23
25
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
12
TP 400-4077-01-HC-S
Page 13
Controls Group
PART NO. DESCRIPTIONREF NO QTY.
1 503849175 1 OPERATOR PRESENCE HANDLE - RH, (Orange)
2 5021490 2 VINYL GRIP
3 5025034 2 NUT, Hex, 3/8-16
4 5043417 2 ADJUSTER LINKAGE
5 5045943 2 SHOULDER SPACER
6 5047723 1 SWITCH ROD
7 5048327 1 BRAKE ROD
8 5020047 3 COLLAR, Set, 5/16
9 503848547 2 THUMB CONTROL LEVER, Complete, (Orange), (Includes Ref No. 10)
10 5025510 2 FOAM GRIP
11 503848544 1 PIVOT CONTROL - RH, (Orange)
12 50252138 7 PIN, Clevis, 5/16 x 1
13 5020979 8 CLEVIS, Plastic, 5/16-24
14 50252016 8 PIN, Cotter
15 5025033 8 NUT, Hex, 5/16-24
16 5047642 2 THUMB CONTROL ROD
17 5025100 2 NUT, Hex Side Lock, 3/8-16
18 5025126 4 NUT, Hex Serrated Flange, 1/4-20
19 503848545 1 PIVOT CONTROL - LH, (Orange)
20 503849176 1 OPERATOR PRESENCE HANDLE - LH, (Orange)
21 50250106 4 CAPSCREW, Hex Head, 1/4-20 x 3/4
22 5025223 2 SHOULDER BOLT, 1/2 x 1
23 5025128 2 NUT, Hex Serrated Flange, 3/8-16
24 5025155 4 WASHER, 5/16
25 50250116 4 CAPSCREW, Hex Head, 5/16-18 x 3/4
26 5025057 4 NUT, Hex Nylon Lock, 5/16-18
27 5021098 2 BEARING, Flange
28 502501332 1 CAPSCREW, Hex Head, 3/8-16 x 4
29 5049352 1 SPRING, Extension
30 5048328 1 BRAKE LINKAGE ROD
31 5047732 1 DUMP VALVE ROD
32 5022481 2 COLLAR, Set, 1/4
33 5047740 1 LINK STUD
34 503847697 1 CONTROL SHAFT ASSEMBLY, (Orange)
35 502505514 1 CAPSCREW, Hex Head, TFL, 5/16-18 x 1-3/4
36 5025127 2 NUT, Hex Serrated Flange, 5/16-18
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
13
TP 400-4077-01-HC-S
Page 14
Electrical Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
FI0038
UNDER CONTROL PANEL
2
4
3
5
6
1
7
To Alternator
Operator Presence
Switch
UNDER ENGINE DECK
To Electric
Clutch
To Engine
Mount Bolt
To Engine
Magneto
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
14
TP 400-4077-01-HC-S
Page 15
Electrical Group
PART NO. DESCRIPTIONREF NO QTY.
1 5047772 1 WIRE HARNESS
2 5022180 1 SWITCH, PTO
3 5021842 1 SWITCH, Ignition, Complete (Includes Ref No. 4-6)
4 5022789 1 KEY, Ignition, Molded (set of 2)
5 5022790 1 COVER
6 5022791 1 PLASTIC NUT
7 5021769 1 SWITCH, NC
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
15
TP 400-4077-01-HC-S
Page 16
Fuel Tank Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
FI0035
1
2
5
4
3
4
8
7
6
4
5
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
16
TP 400-4077-01-HC-S
Page 17
Fuel Tank Group
PART NO. DESCRIPTIONREF NO QTY.
1 5022158 1 FUEL TANK CAP
2 5048149 1 FUEL TANK
3 50250136 4 CAPSCREW, Hex Head, 3/8-16 x 3/4
4 5025156 8 WASHER, 3/8
5 502501310 4 CAPSCREW, Hex Head, 3/8-16 x 1-1/4
6 503848342 1 FUEL TANK MOUNT - LH, (Orange)
7 5025128 4 NUT, Hex Serrated Flange, 3/8-16
8 503848343 1 FUEL TANK MOUNT - RH, (Orange)
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
17
TP 400-4077-01-HC-S
Page 18
Fuel Tank Supply Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
2
Connect to
Fuel Pump
FI0036
7
8
9
1
10
3
4
5
6
4
5
9
11
1
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
1
1
Tank Components
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
18
TP 400-4077-01-HC-S
Page 19
Fuel Tank Supply Group
PART NO. DESCRIPTIONREF NO QTY.
1 5020835 6 CLAMP, Hose
2 50508317 1 HOSE, 7 inch (supplied with engine)
3 50211783 1 FUEL FILTER
4 505083119 2 HOSE, 19-1/2 inch
5 505083318 2 WIRE LOOM, 18 inch
6 5021235 1 VALVE, FUel Shut-Off
7 5023061 1 ELBOW FITTING
8 1726400 1 GROMMET
9 5023069 2 HOSE CLAMP
10 505092520 1 HOSE, 20 inch
11 5023067 1 SCREEN FITTING
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
19
TP 400-4077-01-HC-S
Page 20
Wheel & Tire Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
FI0037
1
2
6
3
4
5
6
7
8
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
20
TP 400-4077-01-HC-S
Page 21
Wheel & Tire Group
PART NO. DESCRIPTIONREF NO QTY.
1 5048409 2 KEY, 3/16
2 5020792S 2 DRIVE HUB
3 5023104 2 WHEEL & TIRE ASSEMBLY, 16 x 6.5 x 8, Complete (Includes Ref 4 & 5)
4 50231042 2 TIRE, 16. x 6.5 x 8
5 50231041 2 WHEEL ASSEMBLY, 8 x 5.38
6 50255203 8 SHIM
7 5020863 2 C-CLIP
8 5020601 8 LUG NUT
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
21
TP 400-4077-01-HC-S
Page 22
Decals - Brand, Model, Safety & Instruction
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
1
3
FI0039
1
5
2
9
6
8
10
10
3
D
4
C
B
49318
A
5
6
7
8
6
11
9
2
12
10
4
10
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
22
TP 400-4077-01-HC-S
Page 23
Decals - Brand, Model, Safety & Instruction
PART NO. DESCRIPTIONREF NO QTY.
1 5049317 1 DECAL, Control Panel
2 5021818 1 DECAL, Warning Machine Climb
3 5048261 1 DECAL, Warning Explosive Fuel
4 5049318 1 DECAL, Deck Height, Pulley Position
5 5048228 1 DECAL, ICC
6 5047778 1 DECAL, Cut Height Adjust
7 1722551 1 DECAL, Simplicity, Blue & Silver, Icon
8 5048482 1 DECAL, Stripe, Blue and Grey
9 1704473 1 DECAL, Hot
10 1704277 1 DECAL, Danger, Chute In Place, Hand Under Deck
11 * 1 MODEL/SERIAL TAG (Not serviced)
12 * 1 DECAL, I.D. Plate
Footnotes
* Not a service part.
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
23
TP 400-4077-01-HC-S
Page 24
32 inch Mower Deck - Frame, Caster & Shield
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
31
30
28
29
14
12
11
32
15
FI0041
2
1
8
10
6
7
9
11
10
3
4
5
8
17
26
27
28
21
20
22
27
29
23
12
13
14
16
17
24
25
19
18
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
24
TP 400-4077-01-HC-S
Page 25
32 inch Mower Deck - Frame, Caster & Shield
PART NO. DESCRIPTIONREF NO QTY.
1 503848145 1 SHIELD INSERT, (Orange)
2 50252994 4 SCREW, Allen Head, 1/4-20 x 1/2
3 5048150 1 GUARD, Mower Deck
4 503848353 2 SHIELD MOUNT BRACKET, (Orange)
5 5022308 4 BODY CLIP, 5/16-18
6 5025169 4 LOCKWASHER, 1/4
7 50250106 4 CAPSCREW, Hex Head, 1/4-20 x 3/4
8 50250138 8 CAPSCREW, Hex Head, 3/8-16 x 1
9 5025128 8 NUT, Hex Serrated Flange, 3/8-16
10 502501320 4 CAPSCREW, Hex Head, 3/8-16 x 2-1/2
11 5025156 4 WASHER, 3/8
12 5022319 4 KNOB
13 503847648 1 FRAME RAIL - LH, (Orange)
14 5022098 2 PLASTIC CAP
15 503848194 1 CROSS TUBE, (Orange)
16 503848969 1 CASTER MOUNT FRAME, Complete, (Orange) (Includes Ref. No. 17 & 28)
17 5020095 2 GREASE FITTING, 1/4-28
18 502501744 2 CAPSCREW, Hex Head, 1/2-13 x 5-1/2
19 5041657 2 AXLE, Caster
20 5021181S 2 WHEEL & TIRE ASSEMBLY, Silver, 9 x 3.5 x 4, Complete (Includes Ref. No. 21 - 25)
21 50211811 2 TIRE, Front, 9 x 3.5 x 4
22 50211812 2 TUBE, for 9 x 3.5 x 4 Tire
23 5021181S3 2 HUB & BEARING ASSEMBLY, Complete, Silver (Includes Ref. No. 24 & 25)
24 5021182 2 BEARING, Roller (1 per tire)
25 5021043 4 RETAINER, Bearing (2 per tire)
26 5025056 2 NUT, Hex Nylon Lock, 1/2-13
27 503848172 2 CASTER YOKE, (Orange) (Use with Ref. No. 16, Part No. 503848969)
28 5020823 4 BUSHING, Flange
29 5025096 4 NUT, Hex Nylon Lock, 3/8-16
30 5010114 2 COLLAR, Split, 3/4
31 5023274 2 VINYL CAP
32 503847649 1 FRAME RAIL - RH, (Orange)
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
25
TP 400-4077-01-HC-S
Page 26
32 inch Mower Deck - Height Adjustment
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
1
21
1
8
8
12
13
17
8
18
8
FI0042
2
3
24
5
3
3
6
1
4
3
7
8
14
14
8
1
12
3
13
3
25
12
11
12
23
10
15
3
16
10
9
22
17
18
23
2210
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
18
8
19
10
20
18
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
26
TP 400-4077-01-HC-S
Page 27
32 inch Mower Deck - Height Adjustment
PART NO. DESCRIPTIONREF NO QTY.
1 5025162 4 WASHER, 1 inch
2 503847682 1 DECK LIFT PIVOT - REAR, (Orange)
3 5025356 8 SHOULDER BOLT, 3/8-16 x 1/2 x 3/8
4 5047655 1 HEIGHT ADJUST ROD
5 5048526 1 LINKAGE ADJUSTER
6 5025100 1 NUT, Hex Side Lock, 3/8-16
7 50252016 1 PIN, Cotter
8 5025046 8 NUT, Hex Top Lock, 3/8-16
9 5010546 1 COLLAR, Set, 3/8
10 5025156 6 WASHER, 3/8
11 5022645 1 SPRING, Compression
12 503847710 4 DECK ADJUST LINK, (Orange)
13 50250118 4 CAPSCREW, Hex Head, 5/16-18 x 1
14 5025139 4 NUT, Hex Serrated Flange, 5/16-18
15 502501310 2 CAPSCREW, Hex Head, 3/8-16 x 1-1/4
16 5044933 2 SPACER
17 5048549 2 COLLAR, Double Split, 1 inch
18 5025128 7 NUT, Hex Serrated Flange, 3/8-16
19 5047737 1 CUT HEIGHT INDICATOR
20 5025034 1 NUT, Hex, 3/8-16
21 503847681 1 DECK LIFT PIVOT, Front, (Orange)
22 50250136 4 CAPSCREW, Hex Head, 3/8-16 x 3/4
23 503848439 2 HANGER PLATE, (Orange)
24 5020095 1 GREASE FITTING, 1/4-28
25 5048548 1 WASHER, Nylon, 3/8
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
27
TP 400-4077-01-HC-S
Page 28
32 inch Mower Deck - Housing, Arbors & Blades
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
23
22
10
Spindle Pulley
25
24
10
24
FI0040
1
Torque Lock Nuts
to 85-90 Ft. Lbs.
(115-122 Nm)
2
4
3
5
6
PTO Clutch Pulley
Idler Pulley
7
8
9
21
Torque Capscrews
to 70 Ft. Lbs.
(95 Nm)
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
17
10
11
18
19
12
13
14
12
15
16
20
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
28
TP 400-4077-01-HC-S
Page 29
32 inch Mower Deck - Housing, Arbors & Blades
PART NO. DESCRIPTIONREF NO QTY.
1 5022918 1 BELT, Arbor
2 5025319 2 NUT, Hex Nylon Lock, 5/8-18
3 5025318 2 WASHER, Spring, 5/8
4 50504071 2 KEY, 1/4 Square x 1
5 5047638 2 SPINDLE PULLEY
6 5047725 8 SPACER
7 50250138 1 CAPSCREW, Hex Head, 3/8-16 x 1
8 503847777 1 BELT GUIDE, (Orange)
9 5025126 1 NUT, Hex Serrated Flange, 3/8-16
10 5025057 10 NUT, Hex Nylon Lock, 5/16-18
11 5047640 2 SPINDLE ASSEMBLY, Complete (Includes Ref. No. 12-16)
12 50463635 4 BEARING, Ball
13 50463634 2 SPACER, Bearing
14 50463631 2 SPINDLE HOUSING
15 50463633 2 TRASH SHIELD
16 50476402 2 SPINDLE SHAFT
17 5023156 8 CAPSCREW, Hex Flange Head, 5/16-18 x 1-1/4
18 5020843 2 MOWER BLADE, 16-1/4
19 5025159 2 WASHER, USS, 5/8
20 502532014 2 CAPSCREW, Hex Head, 5/8-11 x 1-3/4
21 503847576 1 MOWER DECK HOUSING, (Orange)
22 5045914 1 CHUTE PIVOT ROD
23 503847724 1 DISCHARGE CHUTE, (Orange)
24 1723938 2 SPRING, Torsion
25 5045638 1 SPRING SPACER
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694562 - Hydro Cut
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
2004
29
TP 400-4077-01-HC-S
Page 30
Page 31
Hardware Identification & Torque Specifications
Common Hardware Types
Hex Head Capscrew
Carriage Bolt
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is the
Nominal size
second number is present it represent the
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the
second number represents the
example, and the final number is the
bolt or screw (in this example 2 inches long).
, meaning the
Nominal size
inside diameter
, or
body diameter
threads per inch
body length
Washer
Lockwasher
Hex Nut
is 1/2 inch; if a
threads per inch
is 1/2 inch; the
(16 in this
of the
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4 3/4
1/2
Nut, 1/2”
Inside
Diameter
1
1/4 3/4
1/2
Screw, 1/2 x 2
2
1/4 3/4
1/2
3
1/4 3/4
1/2
4
Body
Diameter
Body
Length
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
Size Of
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0 420 571.2
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
No
Marks
SAE Grade 2 SAE Grade 5 SAE Grade 8
in/lbs in/lbs
19
2.1
20
2.3
27
3.1
31
3.5
66
7.6 8 10.9 12 16.3
76
8.6 10 13.6 14 19.0
30
31
43
49
NOTES
3.4
3.5
4.9
5.5
in/lbs
41
43
60
68
4.6
4.9
6.8
7.7
Wrench & Fastener Size Guide
1/4
1/4” Bolt or Nut
Wrench—7/16”
5/16
5/16” Bolt or Nut
Wrench—1/2”
3/8
3/8” Bolt or Nut
Wrench—9/16”
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2
DIA.
1/2” Bolt or Nut
Wrench—3/4”
Page 32
MANUFACTURING, INC.
500 N. Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
www.simplicitymfg.com
© Copyright Simplicity Manufacturing, Inc.
All Rights Reserved. Printed In USA.
2004
Loading...