Simplicity 1694396, 1694486 User Manual
Specifications and Main Features
-Specifications of Zeta 5580 and their relevant features
- Is the model 1694396 or 1694486 of interest to you?
- What is the maximum height of the lift?
- How much clearance is there when the bucket is dumped?
- What is the reach when the height is at maximum?
- What is the maximum angle of dump?
- What is the reach when the bucket is on ground?
- What is the angle of bucket roll back?
- What is the angle of digging depth?
- How tall is the structure when it is in carry position?
- In what way is the lifting capacity effective along with depth?
- When in full height, what is the lifting depth?
- What is the amount of break out force required?
- What is the type of control in use?
- What is the size of the bucket?
- What is the amount of weight required to attach the hydraulic cylinders?
- Is a counterweight required and what is its minimum amount?
- Is a subframe available and what is it in detail?
- Is a tractor mounted to provide hydraulics or are there other sources?
- Is the weight of a subframe and a bucket available?
- How much am I expected to wait till a cycle is completed?
- How much time would it take for a bucket raised to occur?
- How much time would it take for a bucket lowered to occur?
- How much time would it take for a bucket dumped to occur?
- How much time would it take for bucket roll back to occur?
Frequently Asked Questions
Q: How much would a loader attachment max lift?
A: This loader attachment can lift a maximum weight of 380 pounds when at full height of 75.5 inches.
Q: What kind of hydraulic fluid does the tractor use for the loader?
A: The fluid that needs to be utilized is called Type F transmission fluid.
Q: What tips do you have for ensuring efficiency and a smooth load operation during bitterly cold weather?
A: To assure smooth operation in cold weather, the tractor must be warmed up, followed by slow cycling of the loader and bucket several times, in order to ensure that the hydraulic fluid is warmed up.
Q: When I am operating the loader, is there a need for any counterweight?
A: There is a need for counterweights when using the loader, the maximum weight required for the counterweights is about 300 lbs which can either be supplied by the weight box or equivalent.
Q: What steps should I take if I come across hydraulic fluid leaks?
A: Inspect all the hydraulic hose attachment points and hydraulic cylinders for any sign of leaks. In case a cement leak is discovered, perform a repair or replacement as deemed necessary.
Q: What is the procedure for checking the hydraulic oil level in the tractor?
A: The procedure for checking the hydraulic oil level is a check using the loader while it is on the ground and the bucket is completely retracted.
Q: Is it wise to operate the loader with the frontal bucket extended?
A: Using the bucket shockingly never should be the applied method for demolishing materials, even in instances where the bucket is partially extended, if used may cause serious damage to the cylinder and the rod.
Q: How would you advise a novice operator to be safe?
A: I would advise against starting the loader until all the safety gear has been properly fitted and the site is cleared of any personnel as well as animals.
User Manual
Loading...