Simplicity 1693764, 1692871, 1693738, 1692872, 1693769 User Manual
...
Print Vendor
Instructions
How to use this file
Operator’s Manuals
Paper Size: • 11x17
• Body - 50 lbs brilliant white offset or equivalent
• Cover - on pre-printed two tone “Swash” stock.
Press: • Body - 1 color, 2-sided
• Cover - 1 color, 1 sided
Bindery: • Saddle stitch, face trim *if too thick for saddle stitch, tape bind
Covers: • FRONT COVER is present at the beginning of the file.
• BACK COVER is the page immediately after the front cover.
• The part number for this manual (typically a 172_____ number) is
located on the front cover.
• This file may contain several manual which differ only by their covers.
See the part number at the bottom of the cover page. .
Body: • The body for all manuals is identical regardless of the cover.
• Odd number pages are always right hand pages, even number pages
are always left hand pages.
General: • This instruction sheet is NOT part of the manual and must not be
printed.
• Pages labeled “THIS PAGE INTENSIONALLY BLANK” are placement
pages and should NOT be printed.
THIS PAGE INTENTIONALLY BLANK
(FOR PLACEMENT ONLY - DO NOT PRINT)
OPERATOR’S
MANUAL
Legacy / 2000 / 2900 Series
20HP Tractors
Mfg. No. Description
1692870 Legacy, 20HP Hydro
1693114 Legacy, 20HP Hydro (Export)
1693124 2020, 20HP Hydro
1693132 2920, 20HP Hydro
1693219 Legacy, 20HP Hydro
1693220 2920, 20HP Hydro
1693221 2020, 20HP Hydro
1693250 Legacy, 20HP Hydro (Export)
20HP Liquid Cooled Tractors
Mfg. No. Description
1692871 Legacy, 20HP LC Hydro
1693118 Legacy, 20HP LC Hydro (Export)
1693128 2020LC, 20HP LC Hydro
1693136 2920LC, 20HP LC Hydro
23HP Tractors
Mfg. No. Description
1693764 Legacy, 23HP Hydro
1693769 2023, 23HP Hydro
1693770 2923, 23HP Hydro
1693771 Legacy, 23HP Hydro (Export)
24.5HP Tractors
Mfg. No. Description
1693112 Legacy 24.5HP Hydro
1693120 Legacy 24.5HP Hydro (Export)
1693130 2024D, 24.5HP Hydro
1693138 2924D, 24.5HP Hydro
1693738 24.5HP Hydro
25HP Tractors
Mfg. No. Description
1692872 Legacy, 25HP Hydro
1693116 Legacy, 25HP Hydro (Export)
1693126 2025, 25HP Hydro
1693134 2925, 25HP Hydro
1693561 Legacy, 25HP w/ Hydraulics
1693562 2025, 25HP Hydro w/ Hydraulics
1693563 2925, 25HP Hydro w/ Hydraulics
48” Mower Decks
Mfg. No. Description
1692863 48” Mower Deck
1693122 48” Mower Deck
1693252 48” Mower Deck (Export)
1694138 48” Mower Deck
54” Mower Decks
Mfg. No. Description
1693630 54” Mower Deck
1693632 54” Mower Deck
1693726 54” Mower Deck (Export)
1693728 54” Mower Deck (Export)
1694071 54” Mower Deck
1694364 54” Mower Deck
1694365 54” Mower Deck
60” Mower Decks
Mfg. No. Description
1692860 60” Mower Deck
1693123 60” Mower Deck
1693253 60” Mower Deck (Export)
1694072 60” Mower Deck
1717573-15
(Supercedes 1717574, 1717575, 1718619,
1718620, 1718621, & 1721025)
Rev. 6/2003
TP-100-2087-15-LG-SMA
MANUFACTURING, INC.
500 N Spring Street / PO Box 997
Port Washington, WI 53074-0997
www.simplicitymfg.com
© Copyright 2003 Simplicity Manufacturing, Inc.
All Rights Reserved. Printed in USA.
1
Table of Contents
Troubleshooting, Adjustments & Service .......27
Troubleshooting the Tractor..................................27
Troubleshooting the Mower ..................................28
PTO Clutch Adjustment ........................................29
Brake Linkage Adjustment ....................................29
Tractor PTO Belt Replacement.............................30
Headlight Replacement.........................................30
Taillight & Dashlight Replacement ........................30
Mower Adjustments ..............................................31
Roller Bracket Adjustment (60” Deck Only) ..31
Pulley Stop Adjustment (48” Deck Only).......31
Gauge Wheel Adjustment (54” Deck Only)...31
Cutting Height Adjustment ............................32
Leveling the Mower.......................................32
Mower Belt Replacement......................................33
60” Deck Belt Replacement ..........................33
54” Deck Belt Replacement ..........................34
48” Deck Belt Replacement ..........................35
Battery Service......................................................35
Charging A Discharged Battery .......................35
Specifications ....................................................36
Parts & Accessories..........................................38
Lawn Care & Mowing Information .............LC—1
International Symbols ................................LC—8
Technical Manuals ......................................LC—8
NOTE: In this manual, “left” and “right” are referred to as
seen from the operating position.
Safety Rules & Information.................................2
Identification Numbers........................................5
Safety Decals..........................................................6
Features & Controls ............................................8
Control Functions....................................................8
Dashboard Display Functions ...............................10
Safety Interlock System ........................................11
Operating the Tractor ........................................12
General .................................................................12
Checks Before Starting .........................................12
Starting the Engine ...............................................13
Stopping the Tractor & Engine..............................13
Driving the Tractor ................................................13
Mowing..................................................................13
Pushing & Towing the Tractor...............................14
Auxiliary Hydraulic System (Optional)...................14
Mower Removal & Installation ..............................16
Storage .................................................................18
Regular Maintenance ........................................19
Maintenance Schedule .........................................19
Checking Tire Pressures.......................................19
Checking/Adding Fuel...........................................20
Fuel Filter ..............................................................20
Oil & Filter Change................................................21
Check / Change Air FIlter......................................21
Inspect & Replace Spark Plugs (Gas Only) ..........21
Check Antifreeze Level (Liquid Cooled Only) .......22
Change Antifreeze (Liquid Cooled Only) ..............22
Check Transmission Oil Level ..............................22
Changing Transmission Fluid & Filter ...................22
Check Mower Deck Gear Box Oil .........................22
Lubrication ............................................................23
Battery Maintenance .............................................25
Checking Battery Fluid..................................25
Cleaning the Battery and Cables ..................25
Servicing the Mower Blades .................................26
WARNING
Engine exhaust from this product contains
chemicals known, in certain quantities, to cause
cancer, birth defects, or other reproductive harm.
GENERAL OPERATION
• Read, understand, and follow all instructions in the
manual and on the unit before starting.
• Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth
defects, or other reproductive harm.
• Only allow responsible adults, who are familiar with
the instructions, to operate the unit (local regulations
can restrict operator age).
• Clear the area of objects such as rocks, toys, wire,
etc., which could be picked up and thrown by the
blade(s).
• Be sure the area is clear of other people before mowing. Stop unit if anyone enters the area.
• Never carry passengers.
• Do not mow in reverse unless absolutely necessary.
Always look down and behind before and while travelling in reverse.
• Be aware of the mower discharge direction and do
not point it at anyone. Do not operate the mower without either the entire grass catcher or the deflector in
place.
• Slow down before turning.
• Never leave a running unit unattended. Always disengage the PTO, set parking brake, stop engine, and
remove keys before dismounting.
• Turn off the PTO switch to disengage the blades
when not mowing.
• Stop engine before removing grass catcher or unclogging chute.
• Mow only in daylight or good artificial light.
• Do not operate the unit while under the influence of
alcohol or drugs.
• Watch for traffic when operating near or crossing
roadways.
• Use extra care when loading or unloading the unit
into a trailer or truck.
• Data indicates that operators, age 60 years and
above, are involved in a large percentage of riding
mower-related injuries. These operators should evaluate their ability to operate the riding mower safely
enough to protect themselves and others from injury.
• Keep in mind the operator is responsible for accidents
occurring to other people or property.
• All drivers should seek and obtain professional and
practical instruction.
• Always wear substantial footwear and trousers.
Never operate when barefoot or wearing sandals.
• Before using, always visually check that the blades
and blade hardware are present, intact, and secure.
Replace worn or damaged parts.
• Never operate the machine with defective guards, or
without safety protective devices in place.
• Disengage attachments before: refueling, removing
an attachment, making adjustments (unless the
adjustment can be made from the operator’s position).
• When the machine is parked, stored, or left unattended, lower the cutting means unless a positive
mechanical lock is used.
• Follow the manufacturer’s recommendation for wheel
weights or counterweights.
• Before leaving the operator’s position for any reason,
engage the parking brake, disengage the PTO, stop
the engine, and remove the key.
• To reduce fire hazard, keep the unit free of grass,
leaves, & excess oil. Do not stop or park over dry
leaves, grass, or combustible materials.
Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control
of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.
This mowing deck is capable of amputating hands and feet and throwing objects.
The triangle in text signifies important cautions or warnings which must be followed.
Safety Rules & Information
TRANSPORTING AND STORAGE
• When transporting the unit on an open trailer, make
sure it is facing forward, in the direction of travel. If
the unit is facing backwards, wind lift could damage
the hood.
• Always observe safe refueling and fuel handling practices when refueling the tractor after transportation or
storage.
• Never store the unit (with fuel) in an enclosed poorly
ventilated structure. Fuel vapors can travel to an
ignition source (such as a furnace, water heater, etc.)
and cause an explosion. Fuel vapor is also toxic to
humans and animals.
• Always follow the engine manual instructions for
storage preparations before storing the tractor for
both short and long term periods.
• Always follow the engine manual instructions for
proper start-up procedures when returning the unit to
service.
• Never store the unit or fuel container inside where
there is an open flame or pilot light, such as in a
water heater. Allow unit to cool before storing.
TP 600-2459-03-UV-SMA
2
TOWED EQUIPMENT
• Never allow children or others in or on towed equipment.
• Tow only with a machine that has a hitch designed
for towing. Do not attach towed equipment except at
the hitch point.
• Follow the manufacturer’s recommendations for
weight limit for towed equipment and towing on
slopes.
• On slopes, the weight of the towed equipment may
cause loss of traction and loss of control.
• Travel slowly and allow extra distance to stop.
• Do not shift to neutral and coast down hill.
Safety Rules and Information
SLOPE OPERATION
Slopes are a major factor related to loss-of-control and tipover accidents, which can result in severe injury or death.
All slopes require extra caution. If you cannot back up the
slope or if you feel uneasy on it, do not operate on it.
Control of a ride-on machine sliding on a slope will not be
regained by the application of the brake. The main reasons for loss of control are: insufficient tire grip on the
ground, speed too fast, inadequate braking, the type of
machine is unsuitable for it’s task, lack of awareness of the
ground conditions, incorrect hitching and load distribution.
Do
• See your authorized dealer for recommendations of
wheel weights or counterweights to improve stability.
• Mow up and down slopes, not across.
• Remove obstacles such as rocks, tree limbs, etc.
• Watch for holes, ruts, or bumps. Uneven terrain could
overturn the unit. Tall grass can hide obstacles.
• Use slow speed. Tires may lose traction on slopes
even through the brakes are functioning properly.
Choose a low gear so that you will not have to stop or
shift while on the slope.
• Use extra care with grass catchers or other attachments. These can change the stability of the unit.
• Keep all movement on the slopes slow and gradual.
Do not make sudden changes in speed or direction.
• Always keep unit in gear especially when traveling
downhill. When clutching, release clutch slowly.
Do Not
• Do not start or stop on a slope. If tires lose traction,
disengage the blade(s) and proceed slowly straight
down the slope.
• Do not turn on slopes unless necessary, and then,
turn slowly and gradually downhill, if possible.
• Do not mow near drop-offs, ditches, or embankments. The mower could suddenly turn over if a
wheel is over the edge of a cliff or ditch, or if an edge
caves in.
• Do not mow on wet grass. Reduced traction could
cause sliding.
• Do not try to stabilize the unit by putting your foot on
the ground.
• Do not use grass catchers on steep slopes.
• Do not mow slopes you cannot back up.
• Do not shift to neutral and coast down hill.
WARNING
Never operate on slopes greater than 17.6 percent
(10°) which is a rise of 3-1/2 feet (106 cm) vertically in
20 feet (607 cm) horizontally.
When operating on slopes use additional wheel
weights or counterweights. See your dealer to
determine which weights are available and
appropriate for your unit.
Select slow ground speed before driving onto slope.
In addition to front and rear weights, use extra caution
when operating on slopes with rear-mounted grass
catcher.
Mow UP and DOWN the slope, never across the
face, use caution when changing directions and DO
NOT START OR STOP ON SLOPE.
Children
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the
unit and the mowing activity. Never assume that children
will remain where you last saw them.
• Keep children out of the mowing area and under the
watchful care of another responsible adult.
• Be alert and turn unit off if children enter the area.
• Before and during reverse operation, look behind and
down for small children.
• Never carry children. They may fall off and be seriously injured or interfere with safe unit operation.
• Never allow children to operate the unit.
• Use extra care when approaching blind corners,
shrubs, trees, or other objects that may obscure
vision.
EMISSIONS
• Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth
defects, or other reproductive harm.
• Look for the relevant Emissions Durability Period and
Air Index information on the engine emissions label.
3
4
Safety Rules & Information
SERVICE AND MAINTENANCE
• Use extra care in handling gasoline and other fuels.
They are flammable and vapors are explosive.
a) Use only an approved container.
b) Never remove gas cap or add fuel with the
engine running. Allow engine to cool before
refueling. Do not smoke.
c) Never refuel the unit indoors.
• If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.
• Replace all fuel tank caps and fuel container caps
securely.
• Never fill containers inside a vehicle or on a truck bed
with a plastic bed liner. Always place containers on
the ground away from your vehicle before filling.
• Remove gas-powered equipment from the truck or
trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a
portable container, rather than from a gasoline dispenser nozzle.
• Keep nozzle in contact with the rim of the fuel tank or
container opening at all times until fueling is complete. Do not use a nozzle lock-open device.
• If fuel is spilled on clothing, change clothing immediately.
• Maintain or replace safety and instruction labels as
necessary.
• Never run the unit in an enclosed area where carbon
monoxide fumes may collect.
• Keep nuts and bolts, especially blade attachment
bolts, tight and keep equipment in good condition.
• Never tamper with safety devices. Check their proper
operation regularly and make necessary repairs if
they are not functioning properly.
• Keep unit free of grass, leaves, or other debris buildup. Clean up oil or fuel spillage.
• Stop and inspect the equipment if you strike an
object. Repair, if necessary, before restarting.
• Never make adjustments or repairs with the engine
running unless specified otherwise in the engine manufacturer’s manual.
• Do not remove the fuel filter when the engine is hot
as spilled gasoline may ignite. Do not spread fuel line
clamps further than necessary. Ensure clamps grip
hoses firmly over the filter after installation.
• Do not use gasoline containing METHANOL, gasohol
containing more than 10% ETHANOL, gasoline additives, or white gas because engine/fuel system damage could result.
• If the fuel tank must be drained, it should be drained
outdoors.
• Replace faulty silencers/mufflers.
• Grass catcher components are subject to wear, damage, and deterioration, which could expose moving
parts or allow objects to be thrown. Frequently check
components and replace with manufacturer’s recommended parts, when necessary.
• Mower blades are sharp and can cut. Wrap the
blade(s) or wear gloves, and use extra caution when
servicing them.
• Check brake operation frequently. Adjust and service
as required.
• Use only factory authorized replacement parts when
making repairs.
• Always comply with factory specifications on all settings and adjustments.
• Only authorized service locations should be utilized
for major service and repair requirements.
• Never attempt to make major repairs on this unit
unless you have been properly trained. Improper service procedures can result in hazardous operation,
equipment damage and voiding of manufacturer’s
warranty.
• On multiple blade mowers, take care as rotating one
blade can cause other blades to rotate.
• Do not change engine governor settings or overspeed the engine. Operating the engine at excessive
speed can increase the hazard of personal injury.
• Disengage drive attachments, stop the engine,
remove the key, and disconnect the spark plug
wire(s) before: clearing attachment blockages and
chutes, performing service work, striking an object, or
if the unit vibrates abnormally. After striking an
object, inspect the machine for damage and make
repairs before restarting and operating the equipment.
• Never place hands near the hydro pump cooling fan
when the tractor is running. Cooling fan is located on
top of the transaxle.
5
Identification
Numbers
Tractor ID Tag
Mower ID Tag
When contacting your authorized dealer for replacement parts, service, or information you MUST have
these numbers.
Record your model name/number, manufacturer’s identification numbers, and engine serial numbers in the
space provided for easy access. These numbers can be
found in the locations shown.
NOTE: For location of engine identification numbers,
refer to the engine owner’s manual.
CE Models: Place the extra copy of the identification tag
in the manual
Mfg. No.: 169XXXX
Serial No.: XXXXX
kW: XXX
Engine RPM XXXX
LpA: XXX dB(A)
Vibration @ Wheel: XXX m/s²
Vibration @ Seat: XXX m/s²
2002
dB(A)
Port Washington, WI USA 53074-0997
Simplicity Mfg. Inc.
SSAAMMPPLLEE
SSAAMMPPLLEE
North American
Models
CE Models
ENGINE REFERENCE DATA
Model Description Name/Number
Unit MFG
Number
PRODUCT REFERENCE DATA
Unit SERIAL Number
Dealer Name
Date Purchased
Engine Make
Engine Type/Spec
Engine Model
Engine Code/Serial Number
Mower Deck MFG Number
Mower Deck SERIAL
Number
Mfg. No.: 169XXXX
Serial No.: XXXXX
kW: XXX
Engine RPM XXXX
LpA: XXX dB(A)
Vibration @ Wheel: XXX m/s²
Vibration @ Seat: XXX m/s²
2002
dB(A)
Port Washington, WI USA 53074-0997
Simplicity Mfg. Inc.
CE IDENTIFICATION TAG MARKINGS
A. Manufacturer’s Identification Number
B. Manufacturer’s Serial Number
C. Power Rating in Kilowatts
D. Maximum Engine Speed in Rotations per Minute
E. Manufacturer’s Address
F. Year of Manufacture
G. CE Compliance Logo
H. Mass of Unit in Kilograms
I. Sound Power in Decibels ***
J. Sound Pressure at Operator’s Position in Decibels **
K. Vibration at the Steering Wheel *
L. Vibration at the Seat *
This unit complies with European Harmonized Lawn Mower
Standard EN 836, European Machinery Directive 98/37/EC,
and European EMC Directive 89/336/EC
* Tested according to EN 836:1997/A2:2001, EN 1032:
1996, EN 1033:1995
** Tested according to EN836:1997/A2:2001
*** Tested according to 2000/14/EC
A
B
C
D
J
K
L
E
F
G
H
I
CE Models:
Place copy of
Identification Tag here.
6
Safety Rules & Information
SAFETY DECALS
This unit has been designed and manufactured to provide you with the safety and reliability you would expect
from an industry leader in outdoor power equipment
manufacturing.
Although reading this manual and the safety instructions
it contains will provide you with the necessary basic
knowledge to operate this equipment safely and effectively, we have placed several safety labels on the unit to
remind you of this important information while you are
operating your unit.
All DANGER, WARNING, CAUTION and instructional
messages on your rider and mower should be carefully
read and obeyed. Personal bodily injury can result when
these instructions are not followed. The information is for
your safety and it is important! The safety decals below
are on your rider and mower.
If any of these decals are lost or damaged, replace them
at once. See your local dealer for replacements.
These labels are easily applied and will act as a constant
visual reminder to you, and others who may use the
equipment, to follow the safety instructions necessary for
safe, effective operation.
Decal - Danger
Part No. 1704276
Decal - Operating Instructions Left Panel
Part No. 1718613
Decal - Operating Instructions Right Panel
Part No. 1718610
Decal - Danger
Part No. 1704277
Decal - Hydraulics (Optional)
Part No. 1719733
Decal - Operating Instructions Bottom Panel
Part No. 1718199
1718613
• Operator must be in seat.
• Pull UP to engage.
• Push DOWN to disengage.
OPERATION
To Start Engine
• PTO switch(es) off, and brake pedal depressed,
throttle at half to full.
Gasoline Models: Turn ignition to START.
Diesel Models: Turn ignition to RUN/PRE-HEAT.
To Stop Engine
• Engage parking brake, throttle at half to full,
turn Ignition switch to OFF.
When Operator Leaves Seat
• Engine will shut off if PTO is ON.
• Engine will shut off if parking brake is OFF.
When Glow Plug Light goes out,
turn ignition to START.
THROTTLEPTO SWITCH (Option)
• Operate at
FULL throttle.
CHOKE
(On Gasoline
Models ONLY)
CUTTING HEIGHT ADJUST
• Top of switch raises mower cut height.
• Bottom of switch lowers mower
cut height.
SPOUT ROTATION
• Top of switch rotates spout to right.
• Bottom of switch rotates spout to left.
OFF
IGNITION SWITCH
RUN /
• Remove key before leaving machine.
PRE-HEAT
START
PTO SWITCH
• Operator must be in seat.
• Pull UP to engage.
• Push DOWN to disengage
PARKING BRAKE
• To SET — fully depress brake pedal
and pull knob OUT.
STEERING WHEEL
TILT CONTROL
• To RELEASE — fully depress brake
pedal and push knob IN.
1718610
ATTACHMENT LIFT
DIFFERENTIAL LOCK
• Increases traction.
• Front pedal
LOWERS
attachment.
• Rear pedal
RAISES
attachment.
ROTATING BLADES CUT OFF
STOP MOWER WHEN CHILDREN ARE NEAR.
DANGER
OPERATING ON SLOPES
CAN BE DANGEROUS
SEE OPERATOR'S MANUAL.
IF YOU CANNOT
BACK-UP A HILL
—DO NOT DRIVE ON IT.
ARMS AND LEGS
NO RIDERS — THEY FALL OFF.
DANGER
ROTATING CUTTING BLADE
Do not put hands or feet
under mower deck while
blade is rotating.
1704276
ROTATING CUTTING BLADE
Do not operate mower
without deflector or entire
grass catcher in place.
DANGER
AVOID SERIOUS INJURY OR DEATH
• READ OPERATOR'S MANUAL(S).
• KNOW LOCATION AND FUNCTION OF ALL CONTROLS.
• KEEP SAFETY DEVICES (GUARDS, SHIELDS, &
SWITCHES) IN PLACE AND WORKING.
• REMOVE OBJECTS THAT COULD BE THROWN BY
THE BLADE.
• DO NOT MOW WHEN CHILDREN OR OTHERS
ARE AROUND.
• NEVER CARRY CHILDREN.
• LOOK DOWN AND BEHIND—BEFORE AND WHILE
BACKING.
• AVOID SUDDEN TURNS.
• IF YOU CANNOT BACK UP A HILL
— DO NOT OPERATE ON IT.
• GO UP AND DOWN SLOPES, NOT ACROSS.
• IF MACHINE STOPS GOING UPHILL, STOP BLADE
AND BACK DOWN SLOWLY.
• BE SURE BLADE(S) AND ENGINE ARE STOPPED
BEFORE PLACING HANDS OR FEET NEAR BLADE(S).
• WHEN LEAVING MACHINE, SHUT OFF ENGINE,
REMOVE KEY, AND SET PARKING BRAKE.
DANGER
1704277
WARNING
GROUND SPEED CONTROL
• Depress front pedal
to increase forward
ground speed.
• Depress rear pedal
to increase reverse
ground speed.
CRUISE CONTROL
• Slide lever forward
to desired ground speed.
• Fully depress brake pedal
to release.
TWO-SPEED CONTROL
• Do not shift while in motion.
• Lift knob to change gears.
• Push down to lock into gear.
SHIFT TWO-SPEED AXLE TO
NEUTRAL BEFORE TOWING!
Towing in gear will damage transmission.
Do NOT tow at speeds greater than 8 MPH (5 KPH).
N
L
N
H
1718199
7
NOTESNOTES
8
Features
& Controls
Figure 1. Tractor & Mower Controls
A. Choke
B. Rear PTO Switch (Optional)
C. Throttle
D. Headlight Switch
E. Dashboard Display
F. Cutting Height Adjust / Spout Rotation
G. Ignition Switch
H. Front PTO Switch
I. Parking Brake
J. Brake Pedal
K. Ground Speed Control Pedals
L. Steering Wheel Tilt Adjustment
M. Seat Adjustment Lever
N. Cruise Control
O. Two-Speed Control
P. Differential Lock
Q. Attachment Lift Pedals
R. Auxiliary Hydraulic Control Levers (Optional)
A. Choke
Pulling the choke control OUT engages the choke for
cold starting.
A warm engine may not require choking.
B. Rear PTO Switch
(Optional)
The PTO (Power Take-Off) switch engages and disengages attachments that use the OPTIONAL rear PTO.
To engage the PTO, pull UP on the switch. Push DOWN
to disengage.
Note that the operator must be seated
firmly in the tractor seat for the PTO to function.
C. Throttle
The throttle controls engine speed. Move the throttle forward to increase engine speed, and back to decrease
engine speed. Normal operating speed is 3600 RPM.
Do not run at less than 3000 RPM during normal operation. Always set to full throttle when using attachments.
D. Headlight Switch
The light switch turn the tractor lights on and off.
E. Dashboard Display
The dashboard display shows a variety of engine operation and control status information.
See page 8 for more
detailed information.
F. Cutting Height Adjust / Spout Rotation
Cutting Height: The cutting height switch control the
mower cutting height. To set the cutting height, push the
TOP or BOTTOM of the switch while observing the cutting height indicator on the left side of the mower deck.
Spout Rotation: When a snowthrower attachment is
used, the switch rotates the spout (discharge chute) left
or right.
C
D
E
B
A
P
R
Q
F
J
K
M
L
G
H
I
N
O
CONTROL FUNCTIONS
The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing
require the combined use of several controls applied in specific sequences. To learn what combination and sequence
of controls to use for various tasks see the OPERATION section.
Please take a moment and familiarize
yourself with the name, location, and
function of these controls so that you will
better understand the safety and operating
instructions provided in this manual.
9
Control Functions continued…
G. Ignition Switch
The ignition switch starts and stops the engine, it has
three positions:
OFF Stops the engine and shuts off the
electrical system.
RUN Allows the engine to run and powers the
electrical system.
START Cranks the engine for starting.
NOTE: Never leave the ignition switch in the RUN position with the engine stopped–this drains the battery.
H. Front PTO Switch
The PTO (Power Take-Off) switch engages and disengages attachments that use the front PTO. To engage
the PTO, pull UP on the switch. Push DOWN to disengage.
Note that the operator must be seated firmly in the
tractor seat for the PTO to function.
I. Parking Brake Knob
The parking brake is applied by fully depressing the
brake pedal (J, Figure 1), and then pulling OUT on the
parking brake knob (I, Figure 1). To release the parking
brake, fully depress the brake pedal, and push the parking brake knob IN.
J. Brake Pedal
Depressing the brake pedal (I, Figure 1) returns the
transmission to neutral, and applies the tractor brake.
K. Ground Speed Control Pedals
The tractor’s ground speed is controlled by the ground
speed control pedals (J, Figure 1), and the cruise control
(see below).
Depress the FRONT pedal to increase FORWARD
ground speed.
Depress the REAR pedal to increase REVERSE ground
speed. Note that the further down the pedals are
depressed, the faster the tractor will travel.
L. Steering Wheel Adjustment
The tractor is equipped with a tilt steering wheel. Push
DOWN on the tilt adjust tab located on the rear of the
steering column, and tilt the steering wheel to the desired
position.
M. Seat Adjustment Lever
The seat can be adjusted forward and back. Move the
lever to the LEFT, position the seat as desired, and
release the lever to lock the seat into position.
Features & Controls
N. Cruise Control
The cruise control is used to set a constant FORWARD
ground speed. This is useful when mowing long rows or
traveling long distances.
To engage the cruise control, make certain forward area
is clear and slide the cruise control lever forward to the
desired ground speed. Move the lever fully back to the
NEUTRAL position to disengage.
Note that in the event
you need to stop quickly, fully depressing the brake
pedal (I, Figure 1) will automatically release the cruise
control and stop the tractor.
For normal operation, it is
recommended that you manually disengage the cruise
control by returning the lever to the NEUTRAL position.
O. Two-Speed Control
The two-speed control allows the operator to switch the
transmission into high-speed or low-speed, and to disengage the transmission into a NEUTRAL (free-wheeling)
position.
Select the low-speed for heavy work (mowing,
snowthrowing, etc), and high-speed for traveling to and
from work areas. DO NOT SHIFT WHILE MOVING.
To change gears:
1. Stop the tractor, but DO NOT apply the parking brake
or depress the brake pedal.
2. Lift UP on the shift knob.
3. Move the lever to the desired gear.
4. Push DOWN on the knob to lock into gear.
Note: If necessary, rocking the tractor back and forth
slightly makes shifting easier.
P. Differential Lock
The differential lock (H, Figure 1) can be used to
increase traction by locking the transmission differential
(for example when one of the rear wheels starts slipping). To engage, DEPRESS the differential lock pedal
located at the rear of the left foot rest.
Q. Attachment Lift Pedals
The attachment lift pedals (G, Figure 1) raise and lower
attachments such as mower decks, snowthrowers, and
tillers.
To RAISE an attachment, depress the REAR attachment
lift pedal until the desired position is achieved.
Releasing the pedal holds the lift cylinder in position.
Depressing and releasing the FRONT pedal lowers the
attachment lift cylinder and holds it in position.
Depressing the pedal beyond the detent locks it in
FLOAT position. In FLOAT mode the attachment can
float through the full range of the lift cylinder.
R. Auxiliary Hydraulic Control Levers
(Optional)
The auxiliary hydraulic control levers control the flow of
hydraulic oil to the quick connectors located under the
left footrest. See pages 14-15 for specific operating
information on the auxiliary hydraulic system.
Loading...