Simplicity 1693042, 1692546, 1693044, 1693046, 1692544 User Manual
Specifications and Main Features
(7.57 L)
- Muffler: Low Back Pressure Compact,
Quiet Long Walker
- Transmission:
- Hydro Models: Infinite Forward, Reverse
- Gear Range: 0-5.2 MPH (0-8.4 km/h) for hydro models 1.2 - 5.6 MPH (0.5 - 9.0 km/h) for gear models:
- Gear Models: Reverse: One Reverse, Five Forward.
- Controls:
- Mower Drive: Electric Clutch PTO Switch
- Ground Speed Control: Dash Mounted Shift Lever
- Clutch/Brake: Combination Pedal Clutch/Brake,
- Steering: Full Circle Steering Wheel
- Chassis:
- Tire Pressure: 10-12 psi (68 - 82 kPa)
- Wheels: Front - 13x5.00-6; Rear - 16x6.50-8
- Front Axle: Self-Leveling Quick Hich
- Frame: Heavy Gauge, Deep Drawn Steel
- Dimensions:
- Height at steering wheel: 41 In (104.1 cm); at seat back: 35 in (88.9 cm)
- Weight: Net - 405 lbs (183 kg); Shipping - 530 lbs (241 kg)
- Width with 30” mower: 38.5 In (97.8 cm); with 34” mower: 45.5 In (115.6 cm)
- Length: 61 in (155 cm)
Frequently Asked Questions
- Q: What is the horsepower rating of the AGCO Allis riders?
- A: For the 411G, 13 HP for the 412H, and finally 14 HP for the 414H.
- Q. Cutting height adjustment may be a good feature to have on a mower, how many positions does this mower have on it?
- A. The mower is capable of cutting at an infinite height so this feature is non-existent.
- Q: What type of engine is used in these riders?
- A: The riders use various Briggs & Stratton engines as well as a Kohler engine for the 14 HP model.
- Q: What is the fuel capacity of ALLIS?
- A: The fuel capacity is 2 gallons (7.57 liters).
- Q. If I own multiple riders will the transmissions be the same for all of them?
- A: Yes the gear models have five speeds and one reverse for a single forward gear. While the hydro models have no limit forwards and some reverse.
- Q: If I wanted to extend the longevity of my tires, what is a good pressure for my front and rear wheels?
- A: 10 to 12 psi (68 to 82 kPa) is ideal.
- Q: How do I determine the amount of oil present in the engine?
- A: By employing the dipstick, you are able to determine the quantity of oil that is present. Just ensure that the engine is off and the vehicle is placed on an even ground.
- Q: What maintenance tasks get covered in the standard care of the vehicle?
- A: The standard maintenance includes procedures like looking for loose hardware on the rider and mower, checking the oil level in the engine, and checking the spark plugs, among other procedures.
User Manual
Loading...