Simplicity 1692937, 1692626, 1692715, 1692714, 1693225 User Manual

Parts Manual

Rev. 4/1998

TP 400-2157-00-AT-SMA

TURBO COLLECTORS

TURBO GRASS COLLECTOR ATTACHMENTS FOR

TRACTORS & RIDERS

38” TURBO COLLECTORS

Mfg. No. Description

1692626 38” Regent / 500 / 2500 1692714 38” Broadmoor / 1600 / 2600 1693225 38” Regent / 500 / 2500 & ZT Series 1693226 38” Broadmoor / 1600 / 2600

44” TURBO COLLECTORS

Mfg. No. Description

1692715 44” Broadmoor / 1600 / 2600 &

44” Landlord / 1700 / 2700 1692858 44” Regent / 500 / 2500 1693106 44” ZT Series 1693227 44” Broadmoor / 1600 / 2600 &

44” Landlord / 1700 / 2700

48” TURBO COLLECTORS

Mfg. No. Description

1692936 48” Legacy / 2000 / 2900

50” TURBO COLLECTORS

Mfg. No. Description

1692716 50” Landlord / 1700 / 2700

60” TURBO COLLECTORS

1692937 60” Legacy / 2000 / 2900

MANUFACTURING, INC. 500 N Spring Street / PO Box 997

Port Washington, WI 53074-0997 USA

1

TP 400-2157-00-AT-SMA

Table of Contents

This Manual Covers The Following Products:

38” TURBO COLLECTORS PAGES

1692626 38” Regent / 500 / 2500 2, 4, 6, 8, 16, 18 1692714 38” Broadmoor / 1600 / 2600 1693225 38” Regent / 500 / 2500 &

ZT Series

1693226 38” Broadmoor / 1600 / 2600

44” TURBO COLLECTORS PAGES

1692715 44” Broadmoor / 1600 / 2600 & 10, 12, 14, 16,

44” Landlord / 1700 / 2700 Series 20, 22 1692858 44” Regent / 500 / 2500 1693106 44” ZT Series 1693227 44” Broadmoor / 1600 / 2600 &

44” Landlord / 1700 / 2700 Series

48” TURBO COLLECTORS PAGES

1692936 48” Legacy / 2000 / 2900 26, 28

50” TURBO COLLECTORS PAGES

1692716 50” Landlord / 1700 / 2700 16, 24

60” TURBO COLLECTORS PAGES

1692937 60” Legacy / 2000 / 2900 30, 32

TURBO COLLECTOR SYSTEMS 38” Turbo Blower Assembly

1692626 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

38” Turbo Mounting Group

1692626 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

38” Turbo Blower Assembly

1693225 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

38” Turbo Mounting Group

1693225 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

44” Turbo Blower Assembly

1692858, 1693106 . . . . . . . . . . . . . . . . . . . . . . . . . .10

44” Turbo Mounting Group

1692858 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

44” Turbo Mounting Group

1693106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

38” / 44” / 50” Turbo Blower Assembly

1692714, 1692715, 1692716, 1693226, 1693227 . .16

38” Turbo Mounting Group

1692714, 1693226 . . . . . . . . . . . . . . . . . . . . . . . . . .18

44” Turbo Mounting Group

1692715 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

44” Turbo Mounting Group

1693227 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

50” Turbo Mounting Group

1692716 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

48” Turbo Blower Assembly

1692936 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

48” Turbo Mounting Group

1692936 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

60” Turbo Blower Assembly

1692937 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

60” Turbo Mounting Group

1692937 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

REFERENCE INFORMATION:

Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . .34

Torque Specification Chart . . . . . . . . .Inside Back Cover

2

TP 400-2157-00-AT-SMA

Turbo Blower Assembly - 38” Regent / 500 / 2500 Series

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

A-AT42401

The above parts group applies to the following Mfg. Nos.:

1692626 Turbo, 38”

NOTE: All original mower deck parts are shown as phantom parts.

28

12

29

9

37

31

11

31

15

22

38

31

35

4

1

32

14

32

4

1

32

22

33

31

8

26

20

5

24

3

19

25

6

7

10

21

27

16

13

30

6

27

36

18

36

34

27

24

17

23

29

2

Ref. No. 9

See Arbor Pulley & Deflector Group

Mounting holes for 38" Turbo Bracket Assy., Ref. No. 18

3

TP 400-2157-00-AT-SMA

Turbo Blower Assembly - 38” Regent / 500 / 2500 Series

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1692626 Turbo, 38”

1 108202 2 BEARING 2 960403 1 KEY, Woodruff, Modified 3 1657499 1 SPRING, Tension 4 1665982 4 BEARING, Retainer 5 1668500 1 BRACKET, Anchor, Spring 6 1676148 2 BUSHING 7 1676833 1 SPACER 8 1678435 1 BELT STOP

9 1700259 1 DECAL, Danger, Blower 10 1704314 1 FITTING, Grease 11 1705267 1 PLATE, Cover 12 1705492 1 FAN HOUSING (Incl. Ref. No. 9) 13 1706284 1 LEVER ASSY, Turbo (Incl. Ref. Nos. 6 &10) 14 1706465 1 PLATE ASSY. 15 1706631 1 FAN ASSY., 5 Blade 16 1706634 1 PULLEY, Driven 17 1708030 1 IDLER PULLEY ASSY. 18 1714911 1 BRACKET ASSY., Turbo 19 1917356 1 WASHER, Spring Lock, 5/16 20 1917372 1 NUT, Hex, 5/16 21 1920415 1 CAPSCREW, Hex Hd., 3/8-16 x 1-1/4 22 1960472 2 SCREW, Truss Hd., 1/4-18 x 5/8 23 1921959 3 CAPSCREW, Hex, 1/4-20 x 5/8 24 1923341 3 CAPSCREW, Hex Hd., 1/4-20 x 3/4 25 1924361 1 WASHER, Flat 26 1924874 1 WASHER, Flat 27 1924940 2 WASHER, Plain 28 1925003 1 CAPSCREW, Hex, Taptite, 1/4-20 x 1/2 29 1927557 6 NUT, Flange, Whizlock, 5/16-18 30 1928691 1 SETSCREW, Hex, Socket Hd., 5/16-18 x 5/16 31 1930641 10 NUT, Hex, Flange Lock, 1/4-20 32 1931333 7 CARRIAGE BOLT, 5/16-18 x 3/4 33 1931355 1 CARRIAGE BOLT, 3/8-16 x 2-1/4 34 1933263 1 WASHER, Flat 35 1933988 6 PUSH NUT, 3/8 36 1960251 2 NUT, Hex, Jam, Center Lock, 3/8-16 37 1960252 1 CARRIAGE BOLT, 1/4-20 x 5/8 38 1960256 2 SCREW, Wsh. Hd.., 1/4-18 x 5/8

4

TP 400-2157-00-AT-SMA

Turbo Blower Assembly - 38” Regent / 500 / 2500 Series

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

A-AT42402

The above parts group applies to the following Mfg. Nos.:

1692626 Turbo, 38”

NOTE: All original mower deck parts are shown as phantom parts.

6

17

16

18

11

20

1

20

1415

3

7

25

26

5

23

21

4

22

12

19

2

24

13

10

8

9

5

TP 400-2157-00-AT-SMA

Turbo Blower Assembly - 38” Regent / 500 / 2500 Series

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1692626 Turbo, 38”

1 172845 1 BELT STOP

2 1670578 1 KNOB

3 1704768 1 BRACKET, Idler, Turbo

4 1704881 1 BRACKET ASSY., Cut-off

5 1705066 1 PIVOT ASSY., 38"

6 1705141 1 BELT

7 1705716 1 ROD, Deflector

8 1713091 1 PULLEY

9 1713621 1 HUB, Pulley, Short, Splined 10 1713624 1 HUB, Pulley, Long 11 1714817 1 PULLEY ASSY., Idler 12 1715018 1 SPRING LATCH 13 1931337 1 CARRIAGE BOLT, 5/16-18 x 1-1/2 14 1916950 1 NUT, Hex, 3/8-16 15 1916965 1 LOCKWASHER, 3/8 16 1917356 2 LOCKWASHER, 5/16 17 1917372 2 NUT, Hex, 5/16-18 18 1921971 1 CAPSCREW, 3/8-16 x 1-1/4 19 1923362 1 LOCKNUT 20 1924940 3 WASHER, Flat, 3/8 21 1930600 2 SCREW, Taptite, 5/16-18 x 1-1/2 22 1931277 2 NUT, Hex, Flange, Whizlock, 5/16-18 23 1931333 2 CARRIAGE BOLT, 5/16-18 x 3/4 24 1933468 1 WASHER, Flat 25 1933896 4 NUT, Nylock, #10-24 26 1960404 4 SCREW, Truss Hd., #10-24 x 3/4

NOTE: All original mower deck parts are shown as phantom parts.

6

TP 400-2157-00-AT-SMA

Turbo Blower Assembly - 38” Regent / 500 / 2500 & ZT Series

A-AT42403

The above parts group applies to the following Mfg. Nos.:

1693225 Turbo, 38”

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

28

12

29

9

37

31

11

15

22

38

31

35

4

1

32

14

32

4

1

32

22

33

31

8

26

20

5

24

3

19

25

6

7

10

21

27

16

13

30

6

27

36

18

36

34

27

24

17

23

29

2

Ref. No. 9

See Arbor Pulley & Deflector Group

Mounting holes for 38" Turbo Bracket Assy., Ref. No. 18

7

TP 400-2157-00-AT-SMA

Turbo Blower Assembly - 38” Regent / 500 / 2500 & ZT Series

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693225 Turbo, 38”

1 108202 2 BEARING

2 960403 1 KEY, Woodruff, Modified, .188 x .875 #61

3 1657499 1 SPRING, Tension

4 1665982 4 BEARING, Retainer

5 1668500 1 BRACKET, Anchor, Spring

6 1676148 2 BUSHING

7 1676833 1 SPACER

8 1678435 1 BELT STOP

9 1700259 1 DECAL, Danger, Blower 10 1704314 1 FITTING, Grease 11 1705267 1 PLATE, Cover 12 1705492 1 FAN HOUSING (Incl. Ref. No. 9) 13 1706284 1 LEVER ASSY, Turbo (Incl. Ref. Nos. 6 &10) 14 1706465 1 PLATE ASSY. 15 1706631 1 FAN ASSY., 5 Blade 16 1706634 1 PULLEY, Driven 17 1708030 1 IDLER PULLEY ASSY. 18 1714911 1 BRACKET ASSY., Turbo 19 1917356 1 WASHER, Spring Lock, 5/16 20 1917372 1 NUT, Hex, 5/16 21 1920415 1 CAPSCREW, Hex Hd., 3/8-16 x 1-1/4 22 1960472 2 SCREW, Truss Hd., 1/4-18 x 5/8 23 1921959 3 CAPSCREW, Hex, 1/4-20 x 5/8 24 1923341 3 CAPSCREW, Hex Hd., 1/4-20 x 3/4 25 1924361 1 WASHER, Flat 26 1924874 1 WASHER, Flat, 5/16 27 1924940 3 WASHER, Plain, 3/8 28 1925003 1 CAPSCREW, Hex, Taptite, 1/4-20 x 1/2 29 1927557 6 NUT, Flange, Whizlock, 5/16-18 30 1928691 1 SETSCREW, Hex, Socket Hd., 5/16-18 x 5/16 31 1930641 10 NUT, Hex, Flange Lock, 1/4-20 32 1931333 7 CARRIAGE BOLT, 5/16-18 x 3/4 33 1931355 1 CARRIAGE BOLT, 3/8-16 x 2-1/4 34 1933263 1 WASHER, Flat, 7/16 35 1933988 6 PUSH NUT, 3/8 36 1960251 2 NUT, Hex, Jam, Center Lock, 3/8-16 37 1960252 1 CARRIAGE BOLT, 1/4-20 x 5/8 38 1960256 2 SCREW, Washer. Hd.., 1/4-18 x 5/8

8

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 38” Regent / 500 / 2500 & ZT Series

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

The above parts group applies to the following Mfg. Nos.:

1693225 Turbo, 38”

NOTE: All original mower deck parts are shown as phantom parts.

A-AT42404

Existing Pulley & Nut

Existing Hardware

Torque to 55-70 ft. lbs.

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

33

34

35

1

2

34

23

24

5

25

26

27

9

28

30

29

Regent/500/2500

Counterbalance Assembly

31

32

Zero Turn

Counterbalance

Assembly

Mower Deck Turbo Drive Pulley

Turbo Drive

Pulley

Idler

Pulleys

To Slacken

Belt

Mower Deck Arbor Pulley

3

Belt Routing

9

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 38” Regent / 500 / 2500 & ZT Series

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693225 Tubro, 38”

1 1916965 1 LOCKWASHER, 3/8

2 1916950 1 NUT, 3/8-16

3 1705141 1 V-BELT

4 1705066 1 PIVOT BRACKET

5 1931277 3 LOCKNUT, 5/16-18

6 1960404 4 Screw, Truss Hd., 10-24 x 3/4

7 1933896 4 NUT, Nylock, 20-24

8 1718295 1 Support Rod, Deflector

9 1917372 4 NUT, 5/16-18 10 1917356 4 LOCKWASHER, 11 1714817 1 IDLER PULLEY ASSY. (Includes Spacer) 12 1715018 1 SPRING LATCH 13 1923362 1 LOCKNUT, 5/16-18 14 1670578 1 KNOB 15 1933468 1 WASHER, 11/32 OD x 1-1/4 ID x 1/8 Thick 16 1931337 1 CARRIAGE BOLT, 5/16-18 x 1-1/2 17 1713624 1 SPACER, Splined, 1.160” Long 18 1713091 1 PULLEY 19 1713621 1 SPACER, 1.590” Long 20 1704881 1 BAFFLE 21 1930600 2 SCREW, Taptite, 5/16-18 x 1-1/2 22 1931333 2 CARRIAGE BOLT, 5/16-18 x 3/4 23 1717143 1 BRACKET, Counterbalance 24 1930591 1 SCREW, Hex Whiz-Lock, 5/16-18 x 3/4 25 1716875 1 SPRING, Compression (Long) 26 1717289 1 ROD ASSEMBLY, Counterbalance 27 1935048 1 NUT, Flange, 2-Way Lock, 5/16-18 28 1917356 1 LOCKWASHER, 5/16 29 1960233 1 CARRIAGE BOLT, 5/16-18 x 1-1/4 30 1717297 1 ARM, Rear 31 1718215 1 LEVER ASSEMBLY, ZT Counterbalance 32 1718214 1 SPRING, Compression (Short) 33 1921971 1 CAPSCREW, 3/8-16 x 1-1/4 34 1924940 2 WASHER, 3/8 35 172845 1 BELT GUIDE

10

TP 400-2157-00-AT-SMA

Turbo Blower Assembly - 44” Regent / 500 / 2500 & ZT Series

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

A-AT42405

The above parts group applies to the following Mfg. Nos.:

1692858 Turbo, 44” 1693106 Turbo, 44”

NOTE: All original mower deck parts are shown as phantom parts.

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

28

12

29

9

37

31

11

15

22

38

31

35

4

1

32

14

29

4

1

32

22

33

31

8

26

20

5

24

3

19

27

16

13

30

34

25

42

39

18

36

21

10

7 6

24

40

41

42

17

23

32

2

Ref. No. 9

See Mounting Group

Mounting holes for 44" Turbo Bracket Assy.,

11

TP 400-2157-00-AT-SMA

Turbo Blower Assembly - 44” Regent / 500 / 2500 & ZT Series

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1692858 Turbo, 44” 1693106 Turbo, 44”

1 108202 2 BEARING

2 960403 1 KEY, Woodruff, Modified

3 1716853 1 SPRING, Tension

4 1665982 4 BEARING, Retainer

5 1668500 1 BRACKET, Anchor, Spring

6 1714255 1 SPACER, Idler Arm

7 1931942 1 PUSHNUT, 3/8

8 1678435 1 BELT STOP

9 1700259 1 DECAL, Danger, Blower 10 1918431 1 WASHER, Plain 11 1705267 1 PLATE, Cover 12 1705492 1 FAN HOUSING (Incl. Ref. No. 9) 13 1717101 1 LEVER ASSY, Turbo (Incl. Ref. Nos. 6 &10) 14 1706465 1 PLATE ASSY. 15 1706631 1 FAN ASSY., 5 Blade 16 1706634 1 PULLEY, Driven 17 1708030 2 IDLER PULLEY ASSY. 18 1717108 1 BRACKET ASSY., Turbo 19 1917356 1 WASHER, Spring Lock, 5/16 20 1917372 1 NUT, Hex, 5/16 21 1921969 1 CAPSCREW, 3/8-16 X 1-1/2 22 1700819 2 SCREW, Truss Hd., 1/4-18 x 5/8 23 1921959 3 CAPSCREW, Hex, 1/4-20 x 5/8 24 1924009 3 CAPSCREW, Hex Hd., 1/4-20 x 3/4 25 1960339 2 NUT, 3/8-16 26 1924874 1 WASHER, Flat 27 1924940 5 WASHER, Plain 28 1925003 1 CAPSCREW, Hex, Taptite, 1/4-20 x 1/2 29 1927557 6 NUT, Flange, Whizlock, 5/16-18 30 1928691 1 SETSCREW, Hex, Socket Hd., 5/16-18 x 5/16 31 1930641 10 NUT, Hex, Flange Lock, 1/4-20 32 1931333 7 CARRIAGE BOLT, 5/16-18 x 3/4 33 1931355 1 CARRIAGE BOLT, 3/8-16 x 2-1/4 34 1708352 1 BELT STOP 35 1933988 6 PUSH NUT, 3/8 36 1924356 1 WASHER 37 1960252 1 CARRIAGE BOLT, 1/4-20 x 5/8 38 1960256 2 SCREW, Washer. Hd.., 1/4-18 x 5/8 39 1922755 3 WASHER 40 1931277 2 NUT, Whizlock, 5/16-18 41 1679164 1 CUP WASHER 42 1960565 1 CARRIAGE BOLT, 5/16-18 x 2-1/2

12

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 44” Regent / 500 / 2500 Series

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

A-AT42406

The above parts group applies to the following Mfg. Nos.:

1692858 Turbo, 44”

NOTE: All original mower deck parts are shown as phantom parts.

Existing Hardware

Tap front hole

Existing Pulley & Spacer

Existing Hardware

Use Existing Hardware

6

5

7

8 9

10

12

13

15

16

14

4

17

418

19

20

9

21

22

23 24 25

26

27

28

31

32

33

34

20

19

35

8

36

37

3

4

11

13

4

29

30

4

44

45

46

1

43

20

19

42

41

40

4

39

38

Counterbalance Assembly

Mower Deck Arbor Pulley

Turbo Drive

Pulley

Idler

Pulleys

2

Belt Routing

13

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 44” Regent / 500 / 2500 Series

REF NO. PART NO. QTY. DESCRIPTION

The above parts group applies to the following Mfg. Nos.:

1692858 Turbo, 44”

1 1960233 1 CARRIAGE BOLT, 5/16-18 x 1-1/4

2 1717146 1 V-BELT

3 1705070 1 PIVOT ASSEMBLY

4 1931277 6 NUT, Hex Flange, Whizlock, 5/16-18

5 1960404 4 CAPSCREW, Truss Head, #10-24 x 3/4” Lg.

6 1933896 6 NUT, Nylock, #10-24

7 1718295 1 ROD, Deflector

8 1921333 2 CAPSCREW, Hex Hd., 5/16-18 x 1” Lg.

9 1919326 2 WASHER, Flat, 11/32 10 1717107 1 SUPPORT STRAP, Deflector 11 960210 1 WASHER, Nylon, 0.388” Dia. 12 1717105 1 COVER, Turbo Belt 13 1919438 2 NUT, Hex, Nylock, 5/16-18 14 1717291 1 DECAL, Warning 15 1921333 1 CAPSCREW, Hex Hd., 5/16-18 x 1” Lg. 16 1717104 1 SUPPORT, Belt Cover 17 1717106 1 STUD, 5/16-18 x 5-3/4” Lg. 18 1715018 1 LATCH, Spring Wire 19 1917372 3 NUT, Hex, 5/16-18 20 1917356 3 LOCKWASHER, 5/16 21 1674315 1 STOP, Belt 22 1924940 1 WASHER, Flat, 3/8 23 1713523 1 NUT, Sleeve 24 1603592 1 WASHER, Belleville 25 1715785 1 SPACER 26 1717123 1 PULLEY 27 1713623 1 HUB, Double, .610” Long 28 1717109 1 BRACKET, Height Adjustment 29 ** 1 CUP WASHER 30 ** 1 CAPSCREW, Rnd Hd., 5/16-18 x 2.5 Lg. 31 1960223 1 CARRIAGE BOLT, 5/16-18 x 1-1/4” Lg. 32 1704880 1 BRACKET ASSEMBLY 33 1666294 1 SPACER 34 1705308 1 BRACKET, “L” 35 1927557 1 NUT, Hex Flange, Whiz-Lock, 5/16-18 36 1922755 1 WASHER, Flat, 13/32 37 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4” Lg. 38 1717143 1 BRACKET, Counterbalance 39 1930591 1 SCREW, Hex Whiz-Lock, 5/16-18 x 3/4 40 1716875 1 SPRING, Compression 41 1717289 1 ROD ASSEMBLY, Counterbalance 42 1935048 1 NUT, Flange, 2-Way Lock, 5/16-18 43 1717145 1 ARM, Rear 44 1960373 2 CAPSCREW, Taptite, 5/16 x 1 45 1704098 1 UPSTOP 46 1933263 2 WASHER, 5/16

** See Turbo Blower Group

NOTE: All original mower deck parts are shown as phantom parts.

14

Turbo Mounting Group - 44” ZT Series

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

A-AT42407

The above parts group applies to the following Mfg. Nos.:

1693106 Tubro, 44”

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

1

20

19

8

13

4

9

4

Existing Hardware

Existing Pulley & Spacer

Tap front hole

Use Existing Hardware

31

32

Counterbalance

Assembly

36

37

Mower Deck Arbor Pulley

Turbo Drive

Pulley

Idler

Pulleys

2

Belt Routing

15

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 44” ZT Series

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693106 Turbo, 44”

1 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4” Lg.

2 1717146 1 V-BELT

3 1705070 1 PIVOT ASSEMBLY

4 1931277 5 NUT, Hex Flange, Whiz0lock, 5/16-18

5 1960404 4 CAPSCREW, Truss Head, #10-24 x 3/4” Lg.

6 1933896 6 NUT, Nylock, #10-24

7 1718295 1 ROD, Deflector

8 1921333 2 CAPSCREW, Hex Hd., 5/16-18 x 1” Lg.

9 1919326 2 WASHER, Flat, 11/32 10 1717107 1 SUPPORT STRAP, Deflector 11 960210 1 WASHER, Nylon, 0.388” Dia. 12 1717105 1 COVER, Turbo Belt 13 1919438 2 NUT, Hex, Nylock, 5/16-18 14 1717291 1 DECAL, Warning 15 1921333 1 CAPSCREW, Hex Hd., 5/16-18 x 1” Lg. 16 1717104 1 SUPPORT, Belt Cover 17 1717106 1 STUD, 5/16-18 x 5-3/4” Lg. 18 1715018 1 LATCH, Spring Wire 19 1917372 3 NUT, Hex, 5/16-18 20 1917356 3 LOCKWASHER, 5/16 21 1674315 1 STOP, Belt 22 1924940 1 WASHER, Flat, 3/8 23 1713523 1 NUT, Sleeve 24 1603592 1 WASHER, Belleville 25 1717123 1 PULLEY 26 1713624 1 HUB, Double, 1.160” Long 27 1717109 1 BRACKET, Height Adjustment 28 ** 1 CUP WASHER 29 ** 1 CAPSCREW, Rnd Hd., 5/16-18 x 2.5 Lg. 30 1960223 1 CARRIAGE BOLT, 5/16-18 x 1-1/4” Lg. 31 1704880 1 BRACKET ASSEMBLY 32 1666294 1 SPACER 33 1705308 1 BRACKET, “L” 34 1927557 1 NUT, Hex Flange, Whiz-Lock, 5/16-18 35 1922755 1 WASHER, Flat, 13/32 36 1718215 1 LEVER ASSEMBLY, ZT Counterbalance 37 1718214 1 SPRING, Compression

** See Turbo Blower Group

16

TP 400-2157-00-AT-SMA

Turbo Blower Assy - 38” & 44” Broadmoor / 1600 / 2600, 44” & 50” Landlord / 1700 / 2700

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

Mounting Holes for 44” & 50” Turbo Bracket Assy, Ref. No. 20

Mounting Holes for 38” Turbo Bracket Assy, Ref. No. 20

Mounting Holes for 38” Turbo

Mounting Holes for 44” & 50” Turbo

A-AT42408

The above parts group applies to the following Mfg. Nos.:

1692714 Turbo, 38” 1692715 Turbo, 44” 1692716 Turbo, 50” 1693226 Turbo, 38”

1693227 Turbo, 44”

NOTE: All original mower deck parts are shown as phantom parts.

(38”) (44”)

17

TP 400-2157-00-AT-SMA

Turbo Blower Assy - 38” 44” 50” Broadmoor / 1600 / 2600, Landlord / 1700 / 2700, & ZT

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1692714 Turbo, 38” 1692715 Turbo, 44” 1692716 Turbo, 50” 1693226 Turbo, 38”

1693227 Turbo, 44”

1 1935048 6 NUT, Flange, Whizlock, 5/16-18

2 1960252 1 CARRIAGE BOLT, 1/4-20 x 5/8

3 1920397 9 NUT, Hex, Nylock, 1/4-20

4 1930641 3 NUT, Hex, Flange Lock, 1/4-20

5 1921959 3 CAPSCREW, Hex, 1/4-20 x 5/8

6 1705267 1 PLATE, Cover

7 1931333 9 CARRIAGE BOLT, 5/16-18 x 3/4

8 1960472 2 SCREW, Truss Hd., 1/4-18 x 5/8

9 1931355 1 CARRIAGE BOLT, 3/8-16 x 2-1/4 10 1678435 1 BELT STOP 11 1924874 1 WASHER, Flat 12 1917356 1 WASHER, Spring Lock, 5/16 13 1917372 1 NUT, Hex, 5/16 14 1924361 1 WASHER, Flat 15 1676148 2 BUSHING 16 1704314 1 FITTING, Grease 17 1668500 1 BRACKET, Anchor, Spring 18 1923341 3 CAPSCREW, Hex Hd., 1/4-20 x 3/4 (38” Models) 19 1716853 1 SPRING, Tension 20 1704983 1 BRACKET ASSY., Turbo 21 1920415 1 CAPSCREW, Hex Hd., 3/8-16 x 1-1/4 22 1924940 2 WASHER, Plain 23 1708030 1 IDLER PULLEY ASSY. 24 1933263 1 WASHER, Flat 25 1960251 2 NUT, Hex, Jam, Center Lock, 3/8-16 26 1924940 1 WASHER, Flat 27 1706284 1 LEVER ASSY, Turbo (Incl. Ref. Nos. 15 &16) 28 1676833 1 SPACER 29 1706634 1 PULLEY, Driven 30 1928691 1 SETSCREW, Hex, Socket Hd., 5/16-18 x 5/16 31 1706465 1 PLATE ASSY. 32 960403 1 KEY, Woodruff, Modified 33 1924009 1 CAPSCREW, Hex Hd., 1/4-20 x 7/8 (44” Models) 34 1700259 1 DECAL, Danger, Blower 35 1665982 4 BEARING, Retainer 36 108202 2 BEARING 37 1933988 3 PUSH NUT, 3/8 38 1706631 1 FAN ASSY., 5 Blade 39 1960256 1 SCREW, Truss Hd.., 1/4-18 x 1/4 40 1705492 1 FAN HOUSING (Incl. Ref. No. 34) 41 1925003 1 CAPSCREW, Hex, Taptite, 1/4-20 x 1/2

Existing Hardware

Existing Pulley & Nut

Torque to

55-70 ft. lbs.

Existing Washer

2

5

6

7

8

9

10

11

12

13

1414

15

16

17

14

18

19

20

21

22

24

23

11

12

25

26

27

28

29

30

31

32

33

12

11

34

1

4

18

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 38” Broadmoor / 1600 / 2600 Series

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

A-AT42409

The above parts group applies to the following Mfg. Nos.:

1692714 Turbo, 38” 1693226 Turbo, 38”

NOTE: All original mower deck parts are shown as phantom parts.

NOTE: Heavy duty roller (1) replaces roller on right end (closest to turbo). Replacement is required because of the turbo’s additional weight.

Stacked Pulley Ref. No. 2 is for use on early style mower decks with splined arbor shafts.

Mower Deck Turbo Drive Pulley

Turbo Drive

Pulley

Idler

Pulleys

To Slacken

Belt

Mower Deck Arbor Pulley

3

Belt Routing

19

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 38” Broadmoor / 1600 / 2600 Series

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1692714 Turbo, 38” 1693226 Turbo, 38”

1 1713540 1 ROLLER

2 1704769 1 STACKED PULLEY ASSY (Early Production 1692714 Only)

3 1705141 1 V-BELT

4 1931333 2 CARRIAGE BOLT, 5/16-18 x 3/4

5 1705066 1 PIVOT ASSY.

6 1931277 2 NUT, Hex, Flange, Whizlock, 5/16-18

7 1960404 4 SCREW, Truss Hd., #10-24 x 3/4

8 1933896 4 NUT, Nylock, #10-24

9 1718295 1 ROD, Deflector 10 1704789 1 BELT GUIDE, Turbo 11 1917372 4 NUT, Hex, 5/16-18 12 1917356 4 LOCKWASHER, 5/16 13 1921971 1 CAPSCREW, 3/8-16 x 1-1/4 14 1924940 3 WASHER, Flat, 3/8 15 1714817 1 IDLER PULLEY 16 1704768 1 BRACKET, Idler 17 172845 1 BELT STOP 18 1916965 1 LOCKWASHER, 3/8 19 1916950 1 NUT, Hex, 3/8-16 20 1713621 1 SPACER, Splined, 1.590” Long 21 1713091 1 PULLEY ASSY. 22 1713624 1 SPACER, Short 23 1679163 1 NUT, Wing Assy, 5/16 24 1923362 1 NUT, Hex, Center Lock, 5/16-18 25 1924856 2 SCREW, Taptite, 5/16-18 x 1/2 26 1704799 1 BRACE, 27 1705064 1 SPRING LATCH 28 1919381 1 WASHER, Flat 29 1960318 1 CAPSCREW, Hex Hd, 5/16-18 x 2-1/2 30 1960223 1 CARRIAGE BOLT, 5/16-18 x 1-1/4 31 1704881 1 BRACKET ASSY., 32 1666294 1 SPACER 33 1705308 1 BRACKET,"L" 34 1930600 2 SCREW, Taptite, 5/16-18 x 1-1/2

20

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 44” Broadmoor / 1600 / 2600 & Landlord / 1700 / 2700 Series

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

A-AT42410

The above parts group applies to the following Mfg. Nos.:

1692715 Turbo, 44”

NOTE: All original mower deck parts are shown as phantom parts.

Blower Pulley

Fixed Idler Pulley

Tensioning Idler Pulley

Arbor Pulley

Landlord/1700/2700 Series Only (When no up-stop is used)

Existing Hardware

43

44

45

42

46

47

1

Belt Routing

Stacked Pulley Ref. No. 46 and capscrew Ref. No. 47 are for use on early style mower decks with splined arbor shafts.

21

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 44” Broadmoor / 1600 / 2600 & Landlord / 1700 / 2700 Series

REF NO. PART NO. QTY. DESCRIPTION

The above parts group applies to the following Mfg. Nos.:

1692715 Turbo, 44”

1 1705142 1 BELT

2 1921221 1 CAPSCREW 5/16-18 x 1-1/2

3 1919326 2 WASHER, Flat

4 172845 1 BELTSTOP

5 1960318 1 CAPSCREW 5/16-18 x 2-1/2

6 1919381 3 WASHER, Flat

7 1705064 1 SPRING LATCH

8 1925003 1 SCREW, Taptite 1/4-20 x 1/2

9 1678435 1 BELT STOP 10 1704982 1 ANCHOR, Turbo, 44" 11 1917356 2 LOCKWASHER 5/16 12 1917372 2 NUT, Hex, 5/16-18 13 1679163 1 NUT, Wing Assy, 5/16 14 1923362 1 NUT, Hex, Centerlock 5/16-18 15 1713523 1 NUT, Sleeve 16 1709941 1 PULLEY ASSY Turbo 17 1919438 2 HEX NUT, Nylock 18 1705279 1 SHIELD ASSY., Belt 19 1705123 1 STUD, 5/16-18 x 5-13/64 20 1923325 2 CAPSCREW, Hex Hd. 5/16-18 x 7/8 21 1960223 1 CARRIAGE BOLT 5/16-18 x 1-1/4 22 1704880 2 BRACKET ASSY., Cutoff 23 1666294 1 SPACER 24 1705308 1 BRACKET, "L" 25 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4" 26 1705070 1 PIVOT ASSY., 44" 27 1931277 3 NUT, Hex, Flange 28 1931648 1 SCREW. Hex Whiz- lock 5/16-18 x 2" 29 1718295 1 ROD, Deflector 30 1960404 4 SCREW, Truss Hd 31 1933896 4 NUT, Nylock, #10-24 32 1710703 1 SPACER 33 1704768 1 BRACKET, Idler, Turbo 34 1705277 1 LATCH, Belt Cover 35 1924940 2 WASHER, Flat 36 1921969 1 CAPSCREW, 3/8-16 x 1-1/2 37 1714817 1 PULLEY ASSY, Idler 38 1916965 1 LOCKWASHER, 3/8 39 1916950 1 NUT, Hex, 3/8-16 40 1921319 1 WASHER, Flat, 1/4 41 1924874 2 WASHER, Flat 42 REF 1 HUB (Existing) 43 1603592 1 WASHER, Belleville 44 1713634 1 HUB, Pulley, Double, 1.160” Long 45 REF 1 V-PULLEY(Existing) 46 1704796 1 PULLEY, Double (Used with Early Production 1692715 Only) 47 1927531 1 CAPSCREW, 7/16-14 x 2 (Used with Early Production 1692715 Only)

22

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 44” Broadmoor / 1600 / 2600 & Landlord / 1700 / 2700 Series

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

A-AT42411

The above parts group applies to the following Mfg. Nos.:

1693227 Turbo, 44

NOTE: All original mower deck parts are shown as phantom parts.

3

49

48

Existing Hardware on Broadmoor / 1600 / 2600 Series

Existing Pulley & Spacer

Torque to

55-70 ft. lbs.

12

Existing Hardware

7

8

9

10

11

44

45

46

47

40

25

2

6

12

13

14

15

16

17

18

19

21

20

18

8

22 23

24

13

25

26

13

27

28

29

30

31

32

33

34

35

36

37

38

39

40

25

41

43

18

42

4

5

Note: All original (existing) mower deck parts are shown as phantom line parts.

Mower Deck Turbo Drive Pulley

Turbo Drive

Pulley

Idler

Pulleys

To Slacken

Belt

Mower Deck Arbor Pulley

1

Belt Routing

Stacked Pulley Ref. No. 49 and capscrew Ref. No. 48 are for use on early style mower decks with splined arbor shafts.

23

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 44” Broadmoor / 1600 / 2600 & Landlord / 1700 / 2700 Series

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693227 Turbo, 44”

1 1705142 1 BELT

2 1923325 2 CAPSCREW, Hex Hd, 5/16-18 x 7/8

3 1927531 1 CAPSCREW, 7/16-14 x 2 (Used with Early Production 1693227 Only)

4 1927557 1 NUT, Hex, Whizlock, 5/16-18

5 1922755 1 WASHER, 5/16

6 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4

7 1705070 1 PIVOT ASSEMBLY

8 1931277 3 NUT, Hex Whizlock, 5/16-18

9 1960404 4 SCREW, Truss Hd, #10-24 x 3/4

10 1933896 4 NUT, Hex, Nylon Lock, #10-24 11 1718295 1 ROD, Deflector 12 1921333 2 CAPSCREW, Hex Hd, 5/16-18 x 1 13 1919326 3 WASHER, 5/16 14 1718303 1 COVER, Belt 15 1718304 1 SUPPORT, Belt Cover 16 1919438 1 NUT, Hex 5/16-18 17 1921969 1 CAPSCREW, Hex Hd 3/8-16 x 1-1/2 18 1924940 3 WASHER, Flat, 3/8 19 1714817 1 PULLEY ASSEMBLY, Idler 20 1705277 1 LATCH, Belt Cover 21 1704768 1 BRACKET, Idler 22 1916965 1 LOCKWASHER, 3/8 23 1916950 1 NUT, Hex, 3/8-16 24 1921221 1 CAPSCREW, HEX HD, 5/16-18 X 1-1/2 25 1917356 2 LOCKWASHER, 5/16 26 172845 1 BELT STOP 27 1710703 1 SPACER 28 1713523 1 NUT, Sleeve 29 1603592 1 WASHER, Belleville 30 1709941 1 PULLEY 31 1713634 1 HUB, Double Pulley 32 1925003 1 CAPSCREW, Hex Hd, 1/4-20 x 1/2 33 1921319 1 WASHER, 1/4 34 1678435 1 BELT STOP, (Height Indicator) 35 1705064 1 LATCH, Spring 36 1919381 1 WASHER, 5/16 37 1960318 1 CAPSCREW, Hex Hd, 5/16-18 38 1923362 1 NUT, Hex Lock, 5/16-18 39 1679163 1 NUT,Wing, Special, 5/16 40 1917372 3 NUT, Hex, 5/16-18 41 1704982 1 BRACKET, Anchor 42 1704098 1 UPSTOP, Wire 43 1960373 2 CAPSCREW, Hex Washer Hd, Taptite, 5/16 44 1960223 1 CARRIAGE BOLT, 5/16-18 45 1704880 1 BRACKET ASSEMBLY, Cutoff 46 1666294 1 SPACER 47 1705308 1 BRACKET 48 1717291 1 DECAL, Warning 49 1704796 1 PULLEY, Double (Used with Early Production 1693227 Only)

24

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 50” Landlord / 1700 / 2700 Series

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

A-AT42412

The above parts group applies to the following Mfg. Nos.:

1692716 Turbo, 50”

NOTE: All original mower deck parts are shown as phantom parts.

Blower Pulley

Fixed Idler Pulley

Tensioning Idler Pulley

Arbor Pulley

Existing Hardware

42

32

28

3

1

Belt Routing

44

43

Stacked Pulley Ref. No. 44 and capscrew Ref. No. 43 are for use on early style mower decks with splined arbor shafts.

25

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 50” Landlord / 1700 / 2700 Series

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1692716 Turbo, 50”

1 1707956 1 Belt - 50"

2 1921221 1 CAPSCREW 5/16-18 x 1-1/2

3 ** 1 HUB

4 172845 1 BELTSTOP

5 1960318 1 CAPSCREW 5/16-18 x 2-1/2

6 1919381 3 WASHER, Flat

7 1705064 1 SPRING LATCH

8 1925003 1 SCREW, Taptite 1/4-20 x 1/2

9 1678435 1 BELT STOP 10 1704982 1 ANCHOR, Turbo 11 1917356 2 LOCKWASHER 5/16 12 1917372 2 NUT, Hex, 5/16-18 13 1679163 1 NUT, Wing Assy, 5/16 14 1923362 1 NUT, Hex, Centerlock 5/16-18 15 1713523 1 NUT, Sleeve 16 1709941 1 PULLEY ASSY Turbo 17 1919438 2 HEX NUT, Nylock 18 1705279 1 SHIELD ASSY., Belt 19 1705123 1 STUD, 5/16-18 x 5-13/64 20 1923325 2 CAPSCREW, Hex Hd. 5/16-18 x 7/8 21 1960223 1 CARRIAGE BOLT 5/16-18 x 1-1/4 22 1704880 2 BRACKET, Cutoff 23 1666294 1 SPACER 24 1705308 1 BRACKET, "L" 25 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4" 26 1705066 1 PIVOT ASSY., 50" 27 1931277 3 NUT, Hex, Flange 28 ** 1 V-PULLEY 29 1718295 1 ROD, Deflector 30 1960404 4 SCREW, Truss Hd 31 1933896 4 NUT, Nylock, #10-24 32 1713634 1 HUB, Pulley, Double 33 1704768 1 BRACKET, Idler, Turbo 34 1705277 1 LATCH, Belt Cover 35 1924940 2 WASHER, Flat 36 1921969 1 CAPSCREW, 3/8-16 x 1-1/2 37 1714817 1 PULLEY ASSY, Idler 38 1916965 1 LOCKWASHER, 3/8 39 1916950 1 NUT, Hex, 3/8-16 40 1921319 1 WASHER, Flat, 1/4 41 1924874 1 WASHER, Flat 42 1603592 1 WASHER, Belleville 43 1927531 1 CAPSCREW, 7/16-14 x 2 (Used with Early Production 1692716 Only) 44 1704796 1 PULLEY, Double (Used with Early Production 1692716 Only)

**Existing Components From Tractor

26

TP 400-2157-00-AT-SMA

Turbo Blower Assembly - 48” Legacy / 2000 / 2900 Series

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

A-AT42413

The above parts group applies to the following Mfg. Nos.:

1692936 Turbo, 48”

NOTE: All original mower deck parts are shown as phantom parts.

Upstop Capscrew

Slide Under Wing Nut

Place Over Nut

Bracket Capscrews

Mounting Plate - 48” Models

39

38

40

27

TP 400-2157-00-AT-SMA

Turbo Blower Assembly - 48” Legacy / 2000 / 2900 Series

1 1679897 1 MOUNTING PLATE

2 1921959 9 SCREW,Hex Hd.,1/4-20x5/8

3 1960346 1 CAPSCREW, Hex,1/4-20 x 2-1/4

4 1700936 1 STOP, Deflector

5 1924009 1 CAPSCREW, Hex,1/4-20 x 7/8

6 1927557 6 NUT, Flange, Lock, 5/16-18

7 1665982 4 BEARING, Retainer

8 108202 2 BEARING

9 1700259 1 DECAL, Warning 10 1706654 1 HOUSING, Blower (Incl. Ref. No. 9) 11 1679900 1 HOOK, Stoneguard 12 1930641 13 NUT, Hex Flange Whiz,1/4-20 13 1933988 6 PUSH NUT, Nylon,1/4-20 14 1676435 1 WASHER, Plain,1/2 15 1931333 6 CARRIAGE BOLT, 5/16-18 x 3/4 16 1706631 1 FAN ASSY. (5 Blade) 17 960403 1 KEY, Woodruff 18 1960268 1 CARRIAGE BOLT, 3/8-16 x 1-1/4 19 1928731 3 NUT, Hex Jam Lock, 3/8-16 20 1706652 1 PLATE, Shroud 21 170397 1 STOP, Belt 22 1919326 1 WASHER, Plain,11/32 23 1702553 1 COVER, Top 24 1924940 5 WASHER,13/32 25 1928691 1 SETSCREW, Sq. Hd., 5/16-18 x 3/8 26 1706634 1 PULLEY, Driven 27 1666114 1 SPACER 28 1921969 1 CAPSCREW, Hex Hd., 3/8-16 x 1/2 29 1679554 1 SPRING, Tension 30 174561 1 PULLEY, Idler, Adjustable 31 1701827 1 IDLER ARM ASSY. 32 1921210 1 CAPSCREW,3/8-16 x 1 33 157424 1 WASHER, Special 34 1917356 1 LOCKWASHER, 5/16 35 1917372 1 NUT, Hex, 5/16 36 1708030 1 PULLEY, Idler, Fixed 37 1923341 2 CAPSCREW, Hex Hd., 1/4-20 x 3/4 38 1931334 1 CARRIAGE BOLT, 5/16-18 x 7/8 39 1672689 1 S-HOOK 40 1920397 4 LOCKNUT, Nylon, 1/4-20

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1692936 Turbo, 48”

28

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 48” Legacy / 2000 / 2900 Series

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

A-AT42414

The above parts group applies to the following Mfg. Nos.:

1692936 Turbo, 48”

NOTE: All original mower deck parts are shown as phantom parts.

Capscrew Ref. No. 4

Belt Routing

20

29

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 48” Legacy / 2000 / 2900 Series

1 1923362 1 NUT, Hex, 5/16-18

2 1679163 1 NUT ASSY.

3 1679897 1 PLATE, Mounting

4 1960346 1 CAPSCREW, Hex Hd., 1/4-20 x 2-1/4

5 1700936 1 STOP, Deflector

6 1930641 13 NUT, Hex, Flange Whiz, 1/4-20

7 * 1 TURBO ASSY.

8 1923341 2 CAPSCREW, Hex Hd., 1/4-20 x 3/4

9 1924009 1 CAPSCREW, Hex Hd., 1/4-20 x 7/8

10 1700851 1 SPRING 11 1926110 2 CAPSCREW, Hex Hd., 7/16-14 x 2-3/4 12 ** 1 DEFLECTOR ASSY (From Mower). 13 1918199 2 LOCKWASHER, 7/16 14 1918213 2 NUT, Hex, 7/16-14 15 1917372 4 NUT, Hex, 5/16-18 16 1917356 4 LOCKWASHER, 5/16 17 1923325 2 CAPSCREW, Hex Hd., 5/16-18 x 7/8 18 1916950 5 NUT, Hex, 3/8-16 19 1916965 5 LOCKWASHER, 3/8 20 1679914 1 V-BELT 21 1931350 2 CARRIAGE BOLT, 3/8-16 x 1 22 1960373 5 SCREW, Taptite, 3/8-16 x 1 23 1700800 1 ROD, Hinge 24 1924940 1 WASHER, Plain, 3/8 25 1921977 1 CAPSCREW, Hex Hd., 5/16-18 x 1-1/4 26 1709327 1 BRACKET, Support 27 1960486 1 SCREW, Flat Hd., Hex Soc., 5/16-18 x 1-1/4 28 1921210 2 CAPSCREW, Hex Hd., 3/8-16 x 1 29 1925205 1 CAPSCREW, Hex Hd., 5/16-18 x 5/8 30 1960318 1 CAPSCREW, Hex Hd., 5/16-18 x 2-1/2 31 1679898 1 CLAMP, Lower 32 1677651 1 BRACE, Bracket Support 33 1700638 1 CLAMP, Upper 34 1917372 3 NUT, Hex, 5/16-18 35 1917356 3 LOCKWASHER, 5/16 36 1935255 1 PAL NUT, 5/16-18 37 1700797 1 PIVOT ASSY., Deflector 38 1679903 1 PULLEY ASSY. 39 1927120 1 CAPSCREW, Hex Hd., 7/16-14 x 2-1/4 40 1700013 1 COVER, L.H. Mower 41 1708511 3 WASHER, Spacer 42 922121 2 SCREW, Rd. Hd., Mach., 10-32 x 3/8 43 1928919 2 NUT, Hex Washer, 10-32 44 1674020 1 PLUG, Mower Cover 45 1933988 1 PUSH NUT, 5/16 46 1700649 1 HINGE 47 1700728 1 COVER, Belt (Includes Ref. No. 46 & 51) 48 1700669 1 PLASTIC KNOB 49 1700802 1 PIVOT BRACKET, R.H. 50 1700801 1 PIVOT BRACKET, L.H. 51 928707 2 RIVET

* Not Sold Separately ** Original Mower Deck Part

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1692936 Turbo, 48”

30

TP 400-2157-00-AT-SMA

Turbo Blower Assembly - 60” Legacy / 2000 / 2900 Series

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

A-AT42415

The above parts group applies to the following Mfg. Nos.:

1692937, Turbo, 60”

NOTE: All original mower deck parts are shown as phantom parts.

Upstop Capscrew

Slide Under Wing Nut

Place Over Nut Bracket Capscrews

Mounting Plate - 60” Models

39

38

40

31

TP 400-2157-00-AT-SMA

Turbo Blower Assembly - 60” Legacy / 2000 / 2900 Series

1 1679912 1 MOUNTING PLATE

2 1921959 5 SCREW,Hex Hd.,1/4-20x5/8

3 1960346 1 CAPSCREW, Hex,1/4-20 x 2-1/4

4 1700936 1 STOP, Deflector

5 1924009 1 CAPSCREW, Hex,1/4-20 x 7/8

6 1927557 6 NUT, Flange, Lock, 5/16-18

7 1665982 4 BEARING, Retainer

8 108202 2 BEARING

9 1700259 1 DECAL, Warning 10 1706718 1 HOUSING, Blower (Incl. Ref. No. 9) 11 1679900 1 HOOK, Stoneguard 12 1930641 13 NUT, Hex Flange Whiz,1/4-20 13 1933988 6 PUSH NUT, Nylon,1/4-20 14 1676435 1 WASHER, Plain,1/2 15 1931333 6 CARRIAGE BOLT, 5/16-18 x 3/4 16 1706631 1 FAN ASSY. (5 Blade) 17 960403 1 KEY, Woodruff 18 1960268 1 CARRIAGE BOLT, 3/8-16 x 1-1/4 19 1928731 3 NUT, Hex Jam Lock, 3/8-16 20 1706652 1 PLATE, Shroud 21 170397 1 STOP, Belt 22 1919326 1 WASHER, Plain,11/32 23 1702589 1 COVER, Top 24 1924940 5 WASHER,13/32 25 1928691 1 SETSCREW, Sq. Hd., 5/16-18 x 3/8 26 1706634 1 PULLEY, Driven 27 1666114 1 SPACER 28 1921969 1 CAPSCREW, Hex Hd., 3/8-16 x 1/2 29 1679554 1 SPRING, Tension 30 174561 1 PULLEY, Idler, Adjustable 31 1701827 1 IDLER ARM ASSY. 32 1921210 1 CAPSCREW,3/8-16 x 1 33 157424 1 WASHER, Special 34 1917356 1 LOCKWASHER, 5/16 35 1917372 1 NUT, Hex, 5/16 36 1708030 1 PULLEY, Idler, Fixed 37 1923341 2 CAPSCREW, Hex Hd., 1/4-20 x 3/4 38 1931334 1 CARRIAGE BOLT, 5/16-18 x 7/8 39 1672689 1 S-HOOK 40 1920397 4 LOCKNUT, Nylon, 1/4-20

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1692937, Turbo, 60”

32

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 60” Legacy / 2000 / 2900 Series

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

A-AT42416

The above parts group applies to the following Mfg. Nos.:

1692937, Turbo, 60”

NOTE: All original mower deck parts are shown as phantom parts.

Capscrew Ref No. 3, Page 26

Belt Routing

14

33

TP 400-2157-00-AT-SMA

Turbo Mounting Group - 60” Legacy / 2000 / 2900 Series

1 1717618 1 COVER, L.H. Mower

2 1700669 1 PLASTIC KNOB

3 1700668 1 COVER ASSY., (Incl. Ref. Nos. 4 & 5)

4 1700649 1 HINGE

5 928707 2 RIVET, 3/16 x 5/16

6 1928919 2 NUT, Hex,Washer#10-32

7 1933988 1 PUSH NUT, 5/16 Stud

8 1935255 1 PALNUT, 5/16-18

9 1700654 1 BRACKET, Belt Cover

10 1916622 2 NUT, Hex, Full,1/4-20 11 1916964 2 LOCKWASHER,1/4 12 922121 2 SCREW, Rd. Hd., Mach., #10-32 x 3/8 13 1921958 2 CAPSCREW, Hex,1/4-20x 1/2 14 1679915 1 V-BELT 15 1922918 1 SCREW, Cap, Hex, 3/8-16 x 3-1/4 16 157424 1 WASHER, Special 17 1705897 2 BEARING 18 1700651 1 SPACER, Pulley 19 1700650 1 PULLEY 20 1700652 1 SPACER 21 1916965 3 LOCKWASHER, 3/8 22 1916950 3 NUT, Hex, Full, 3/8-16 23 1700852 1 SPRING, Torsion 24 1918447 2 PIN, Cotter, 3/32 x 3/4 25 1700832 1 HINGE ASSY., Rear 26 1921210 2 CAPSCREW, Hex, 3/8-16 x 1 27 1926110 2 CAPSCREW,Hex,7/16-14x2-1/4 28 1700801 1 PIVOT, Bracket, L.H. 29 1918199 2 LOCKWASHER, 7/16 30 1918213 2 NUT, Hex, Full, 7/16-14 31 1917372 7 NUT, Hex, Full, 5/16-18 32 1917356 7 LOCKWASHER, 5/16 33 1923325 2 CAPSCREW, Hex, 5/16-18 x 7/8 34 1700802 1 PIVOT, Bracket, R.H. 35 1700828 1 HINGE ASSY., Front 36 1700853 1 ROD, Pivot 37 1960318 1 CAPSCREW, Hex, 5/16-18 x 2-1/2 38 1925205 1 CAPSCREW, Hex, 5/16-18 x 5/8 39 1679898 1 CLAMP, Lower 40 1679899 1 CLAMP, Upper 41 1679163 1 NUT ASSY. 42 1923362 1 NUT, Hex, Full, Lock, 5/16-18 43 1677652 1 BRACE, Bracket Support 44 1931350 4 CARRIAGE BOLT, 3/8-16 x 1 45 1717580 1 BRACKET, Support 46 1921977 1 CAPSCREW, 5/16-18 x 1-1/4 47 1924940 1 WASHER, 3/8 48 1960486 1 SCREW, Socket Head, 5/16-18 x 1-1/4

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1692937, Turbo, 60”

34

TP 400-2157-00-AT-SMA

Part Number Index by Page Number

** 12 29 ** 12 30 ** 14 28 ** 14 29 REF 20 42 REF 20 45

** 24 3 ** 24 28 *287 ** 28 12 108202 2 1 108202 6 1 108202 10 1 108202 16 36 108202 26 8 108202 30 8 157424 26 33 157424 30 33 157424 32 16 170397 26 21 170397 30 21 172845 4 1 172845 8 35 172845 18 17 172845 20 4 172845 22 26 172845 24 4 174561 26 30 174561 30 30 922121 28 42 922121 32 12 928707 28 51 928707 32 5 960210 12 11 960210 14 11 960403 2 2 960403 6 2 960403 10 2 960403 16 32 960403 26 17 960403 30 17 1603592 12 24 1603592 14 24 1603592 20 43 1603592 22 29 1603592 24 42 1657499 2 3 1657499 6 3 1665982 2 4 1665982 6 4 1665982 10 4 1665982 16 35 1665982 26 7 1665982 30 7 1666114 26 27 1666114 30 27 1666294 12 33 1666294 14 32

1666294 18 32 1666294 20 23 1666294 22 46 1666294 24 23 1668500 2 5 1668500 6 5 1668500 10 5 1668500 16 17 1670578 4 2 1670578 8 14 1672689 26 39 1672689 30 39 1674020 28 44 1674315 12 21 1674315 14 21 1676148 2 6 1676148 6 6 1676148 16 15 1676435 26 14 1676435 30 14 1676833 2 7 1676833 6 7 1676833 16 28 1677651 28 32 1677652 32 43 1678435 2 8 1678435 6 8 1678435 10 8 1678435 16 10 1678435 20 9 1678435 22 34 1678435 24 9 1679163 18 23 1679163 20 13 1679163 22 39 1679163 24 13 1679163 28 2 1679163 32 41 1679164 10 41 1679554 26 29 1679554 30 29 1679897 26 1 1679897 28 3 1679898 28 31 1679898 32 39 1679899 32 40 1679900 26 11 1679900 30 11 1679903 28 38 1679912 30 1 1679914 28 20 1679915 32 14 1700013 28 40 1700259 2 9 1700259 6 9 1700259 10 9 1700259 16 34 1700259 26 9

1700259 30 9 1700638 28 33 1700649 28 46 1700649 32 4 1700650 32 19 1700651 32 18 1700652 32 20 1700654 32 9 1700668 32 3 1700669 28 48 1700669 32 2 1700728 28 47 1700797 28 37 1700800 28 23 1700801 28 50 1700801 32 28 1700802 28 49 1700802 32 34 1700819 10 22 1700828 32 35 1700832 32 25 1700851 28 10 1700852 32 23 1700853 32 36 1700936 26 4 1700936 28 5 1700936 30 4 1701827 26 31 1701827 30 31 1702553 26 23 1702589 30 23 1704098 12 45 1704098 22 42 1704314 2 10 1704314 6 10 1704314 16 16 1704768 4 3 1704768 18 16 1704768 20 33 1704768 22 21 1704768 24 33 1704769 18 2 1704789 18 10 1704796 20 46 1704796 22 49 1704796 24 44 1704799 18 26 1704880 12 32 1704880 14 31 1704880 20 22 1704880 22 45 1704880 24 22 1704881 4 4 1704881 8 20 1704881 18 31 1704982 20 10 1704982 22 41 1704982 24 10

1704983 16 20 1705064 18 27 1705064 20 7 1705064 22 35 1705064 24 7 1705066 4 5 1705066 8 4 1705066 18 5 1705066 24 26 1705070 12 3 1705070 14 3 1705070 20 26 1705070 22 7 1705123 20 19 1705123 24 19 1705141 4 6 1705141 8 3 1705141 18 3 1705142 20 1 1705142 22 1 1705267 2 11 1705267 6 11 1705267 10 11 1705267 16 6 1705277 20 34 1705277 22 20 1705277 24 34 1705279 20 18 1705279 24 18 1705308 12 34 1705308 14 33 1705308 18 33 1705308 20 24 1705308 22 47 1705308 24 24 1705492 2 12 1705492 6 12 1705492 10 12 1705492 16 40 1705716 4 7 1705897 32 17 1706284 2 13 1706284 6 13 1706284 16 27 1706465 2 14 1706465 6 14 1706465 10 14 1706465 16 31 1706631 2 15 1706631 6 15 1706631 10 15 1706631 16 38 1706631 26 16 1706631 30 16 1706634 2 16 1706634 6 16 1706634 10 16 1706634 16 29

1706634 26 26 1706634 30 26 1706652 26 20 1706652 30 20 1706654 26 10 1706718 30 10 1707956 24 1 1708030 2 17 1708030 6 17 1708030 10 17 1708030 16 23 1708030 26 36 1708030 30 36 1708352 10 34 1708511 28 41 1709327 28 26 1709941 20 16 1709941 22 30 1709941 24 16 1710703 20 32 1710703 22 27 1713091 4 8 1713091 8 18 1713091 18 21 1713523 12 23 1713523 14 23 1713523 20 15 1713523 22 28 1713523 24 15 1713540 18 1 1713621 4 9 1713621 8 19 1713621 18 20 1713623 12 27 1713624 4 10 1713624 8 17 1713624 14 26 1713624 18 22 1713634 20 44 1713634 22 31 1713634 24 32 1714255 10 6 1714817 4 11 1714817 8 11 1714817 18 15 1714817 20 37 1714817 22 19 1714817 24 37 1714911 2 18 1714911 6 18 1715018 4 12 1715018 8 12 1715018 12 18 1715018 14 18 1715785 12 25 1716853 10 3 1716853 16 19 1716875 8 25

Part No. Page No Ref No. Part No. Page No Ref No. Part No. Page No Ref No. Part No. Page No Ref No. Part No. Page No Ref No.

TP 400-2157-00-AT-SMA

35

Part Number Index by Page Number

1716875 12 40 1717101 10 13 1717104 12 16 1717104 14 16 1717105 12 12 1717105 14 12 1717106 12 17 1717106 14 17 1717107 12 10 1717107 14 10 1717108 10 18 1717109 12 28 1717109 14 27 1717123 12 26 1717123 14 25 1717143 8 23 1717143 12 38 1717145 12 43 1717146 12 2 1717146 14 2 1717289 8 26 1717289 12 41 1717291 12 14 1717291 14 14 1717291 22 48 1717297 8 30 1717580 32 45 1717618 32 1 1718214 8 32 1718214 14 37 1718215 8 31 1718215 14 36 1718295 8 8 1718295 12 7 1718295 14 7 1718295 18 9 1718295 20 29 1718295 22 11 1718295 24 29 1718303 22 14 1718304 22 15 1916622 32 10 1916950 4 14 1916950 8 2 1916950 18 19 1916950 20 39 1916950 22 23 1916950 24 39 1916950 28 18 1916950 32 22 1916964 32 11 1916965 4 15 1916965 8 1 1916965 18 18 1916965 20 38 1916965 22 22 1916965 24 38 1916965 28 19

1916965 32 21 1917356 2 19 1917356 4 16 1917356 6 19 1917356 8 10 1917356 8 28 1917356 10 19 1917356 12 20 1917356 14 20 1917356 16 12 1917356 18 12 1917356 20 11 1917356 22 25 1917356 24 11 1917356 26 34 1917356 28 16 1917356 28 35 1917356 30 34 1917356 32 32 1917372 2 20 1917372 4 17 1917372 6 20 1917372 8 9 1917372 10 20 1917372 12 19 1917372 14 19 1917372 16 13 1917372 18 11 1917372 20 12 1917372 22 40 1917372 24 12 1917372 26 35 1917372 28 15 1917372 28 34 1917372 30 35 1917372 32 31 1918199 28 13 1918199 32 29 1918213 28 14 1918213 32 30 1918431 10 10 1918447 32 24 1919326 12 9 1919326 14 9 1919326 20 3 1919326 22 13 1919326 26 22 1919326 30 22 1919381 18 28 1919381 20 6 1919381 22 36 1919381 24 6 1919438 12 13 1919438 14 13 1919438 20 17 1919438 22 16 1919438 24 17 1920397 16 3

1920397 26 40 1920397 30 40 1920415 2 21 1920415 6 21 1920415 16 21 1921210 26 32 1921210 28 28 1921210 30 32 1921210 32 26 1921221 20 2 1921221 22 24 1921221 24 2 1921319 20 40 1921319 22 33 1921319 24 40 1921333 12 8 1921333 12 15 1921333 14 8 1921333 14 15 1921333 22 12 1921958 32 13 1921959 2 23 1921959 6 23 1921959 10 23 1921959 16 5 1921959 26 2 1921959 30 2 1921969 10 21 1921969 20 36 1921969 22 17 1921969 24 36 1921969 26 28 1921969 30 28 1921971 4 18 1921971 8 33 1921971 18 13 1921977 28 25 1921977 32 46 1922755 10 39 1922755 12 36 1922755 14 35 1922755 22 5 1922918 32 15 1923325 20 20 1923325 22 2 1923325 24 20 1923325 28 17 1923325 32 33 1923341 2 24 1923341 6 24 1923341 16 18 1923341 26 37 1923341 28 8 1923341 30 37 1923362 4 19 1923362 8 13 1923362 18 24 1923362 20 14

1923362 22 38 1923362 24 14 1923362 28 1 1923362 32 42 1924009 10 24 1924009 16 33 1924009 26 5 1924009 28 9 1924009 30 5 1924356 10 36 1924361 2 25 1924361 6 25 1924361 16 14 1924856 18 25 1924874 2 26 1924874 6 26 1924874 10 26 1924874 16 11 1924874 20 41 1924874 24 41 1924940 2 27 1924940 4 20 1924940 6 27 1924940 8 34 1924940 10 27 1924940 12 22 1924940 14 22 1924940 16 22 1924940 16 26 1924940 18 14 1924940 20 35 1924940 22 18 1924940 24 35 1924940 26 24 1924940 28 24 1924940 30 24 1924940 32 47 1925003 2 28 1925003 6 28 1925003 10 28 1925003 16 41 1925003 20 8 1925003 22 32 1925003 24 8 1925205 28 29 1925205 32 38 1926110 28 11 1926110 32 27 1927120 28 39 1927531 20 47 1927531 22 3 1927531 24 43 1927557 2 29 1927557 6 29 1927557 10 29 1927557 12 35 1927557 14 34 1927557 22 4

1927557 26 6 1927557 30 6 1928691 2 30 1928691 6 30 1928691 10 30 1928691 16 30 1928691 26 25 1928691 30 25 1928731 26 19 1928731 30 19 1928919 28 43 1928919 32 6 1930591 8 24 1930591 12 39 1930600 4 21 1930600 8 21 1930600 18 34 1930641 2 31 1930641 6 31 1930641 10 31 1930641 16 4 1930641 26 12 1930641 28 6 1930641 30 12 1931277 4 22 1931277 8 5 1931277 10 40 1931277 12 4 1931277 14 4 1931277 18 6 1931277 20 27 1931277 22 8 1931277 24 27 1931333 2 32 1931333 4 23 1931333 6 32 1931333 8 22 1931333 10 32 1931333 12 37 1931333 14 1 1931333 16 7 1931333 18 4 1931333 20 25 1931333 22 6 1931333 24 25 1931333 26 15 1931333 30 15 1931334 26 38 1931334 30 38 1931337 4 13 1931337 8 16 1931350 28 21 1931350 32 44 1931355 2 33 1931355 6 33 1931355 10 33 1931355 16 9 1931648 20 28

Part No. Page No Ref No. Part No. Page No Ref No. Part No. Page No Ref No. Part No. Page No Ref No. Part No. Page No Ref No.

TP 400-2157-00-AT-SMA

36

Part Number Index by Page Number

1931942 10 7 1933263 2 34 1933263 6 34 1933263 12 46 1933263 16 24 1933468 4 24 1933468 8 15 1933896 4 25 1933896 8 7 1933896 12 6 1933896 14 6 1933896 18 8 1933896 20 31 1933896 22 10 1933896 24 31 1933988 2 35 1933988 6 35 1933988 10 35 1933988 16 37 1933988 26 13 1933988 28 45 1933988 30 13 1933988 32 7 1935048 8 27 1935048 12 42 1935048 16 1 1935255 28 36 1935255 32 8 1960223 12 31 1960223 14 30 1960223 18 30 1960223 20 21 1960223 22 44 1960223 24 21 1960233 8 29 1960233 12 1 1960251 2 36 1960251 6 36 1960251 16 25 1960252 2 37 1960252 6 37 1960252 10 37 1960252 16 2 1960256 2 38 1960256 6 38 1960256 10 38 1960256 16 39 1960268 26 18 1960268 30 18 1960318 18 29 1960318 20 5 1960318 22 37 1960318 24 5 1960318 28 30 1960318 32 37 1960339 10 25 1960346 26 3 1960346 28 4

1960346 30 3 1960373 12 44 1960373 22 43 1960373 28 22 1960404 4 26 1960404 8 6 1960404 12 5 1960404 14 5 1960404 18 7 1960404 20 30 1960404 22 9 1960404 24 30 1960472 2 22 1960472 6 22 1960472 16 8 1960486 28 27 1960486 32 48 1960565 10 42

Part No. Page No Ref No. Part No. Page No Ref No. Part No. Page No Ref No. Part No. Page No Ref No. Part No. Page No Ref No.

Torque Specification Chart

FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

Hardware Grade

SAE Grade 2 SAE Grade 5 SAE Grade 8

Size Of

in/lbs in/lbs

in/lbs

Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32

19

2.1

30

3.4

41

4.6

8-36

20

2.3

31

3.5

43

4.9

10-24

27

3.1

43

4.9

60

6.8

10-32

31

3.5

49

5.5

68

7.7

1/4-20

66

7.6 8 10.9 12 16.3

1/4-28

76

8.6 10 13.6 14 19.0 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 27 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 420 571.2 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0

Hex Head Capscrew

Hex Nut

Lockwasher

Washer

Carriage Bolt

NOTES

1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:

a. for prevailing torque locknuts - use 65% of grade 5

torques.

b. for flange whizlock nuts and screws - use 135% of

grade 5 torques.

3. Unless otherwise noted on assembly drawings, all torque values must meet this specification.

Hardware Identification & Torque Specifications

Common Hardware Types

Screw, 1/2 x 2

Body

Diameter

Body

Length

Inside Diameter

Nut, 1/2”

No

Marks

3/8” Bolt or Nut

Wrench—9/16”

3/8

5/16” Bolt or Nut

Wrench—1/2”

5/16

1/4” Bolt or Nut

Wrench—7/16”

1/4

1/2” Bolt or Nut

Wrench—3/4”

1/2

DIA.

7/16 DIA.

7/16” Bolt or Nut

Wrench (Bolt)—5/8”

Wrench (Nut)—11/16”

Wrench & Fastener Size Guide

Standard Hardware Sizing

When a washer or nut is identified as 1/2”, this is the

Nominal size

, meaning the

inside diameter

is 1/2 inch; if a

second number is present it represent the

threads per inch

When bolt or capscrew is identified as 1/2 - 16 x 2”, this means the

Nominal size

, or

body diameter

is 1/2 inch; the

second number represents the

threads per inch

(16 in this

example, and the final number is the

body length

of the

bolt or screw (in this example 2 inches long).

The guides and ruler furnished below are designed to help you select the appropriate hardware and tools.

0

1/4 3/4

1/2

1

1/4 3/4

1/2

2

1/4 3/4

1/2

3

1/4 3/4

1/2

4

Simplicity 1692937, 1692626, 1692715, 1692714, 1693225 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual