Simplicity 1692033, 1691996, 1692044, 1692036, 1692024 User Manual
...Specifications and Main Features
- Engine Variants:
- 16 HP Briggs & Stratton
- Horse Power: 16 HP with 3600 to 3800 rotations per minute
- Number of Cylinders: 2
- Bore: 2.68 In. or 68 mm
- Stroke: 2.60 In. or 66 mm
- Displacement: 29.3 Cu. In. that is equivalent to 480 cc
- Electronic Supply: 12 Volt, 16 Amp Generator, 340CCA
- Oil Reserve: 3.5 Pints with a Filter of 1.6 Liters
- Fuel Reserve: Has 4 Gallons or 15.1 Liters
- 14 HP Kohler
- Horse Power: 14 HP using 3600 rotations in every minute
- Bore: 3.43 in which is approximately 87 mm.
- Stroke: 2.64 in which is approximately 73 mm.
- Displacement: 24.3 Cu Inches which is equivalent to 398 cc
- Electronics: Has 12 Volt, 15 Amp alternator provides 340 added cold crank amps
- Oil Section: Incorporates 4 Pint ,has a filter of 1.9 Liters
- Fuel Reserve: Holds 4 gallons which is 15.1 litters.
- Transmission:
- Hydro Transmission: Tuff Torq K215-A, Telescopic Hydrostatic, Operational movement: 0 to 6 miles per hour (forward) and 0 to 2.6 miles per hour (reverse)
- Gear Transmission: Tuff Torq K210-A, Progressive, Six speeds (from 0.6 to 5.5 miles per hour)
- Chassis:
- Frame: Formed steel structure- heavy gauge steel channel
- Turning Radius: Inside Rear Tire measures 24 inches which is approximately 61 centimeters.
- Weight: Approximate weight of the product self is 670 without the mower which is around 304.5 kilograms.
- Controls:
- Steering Column: Full Circle Steering Wheel
- Clutch/Brake Pedal: Combination, Hydro и Gears
- Electric PTO Clutch
- Dimensions:
- Overall Length: 72 in. (183 cm)
- Overall Width: 39 In. (99.1 cm)
- Height to Top of Engine Cover: 36 In. (91.4 cm)
- Mower Deck:
- 50” Deck: Effective Cutting Width: 50 In. (127 cm), Variable Cutting Height: 1.0 - 3.6 In. (2.5 to 9.1 cm)
- 44” Deck: Effective Cutting Width: 44 In. (111.8 cm), Variable Cutting Height: 1 -
3.6 In. (2.5 to 9.1 cm)
Frequently Asked Questions
- What type of fuel should I use for the engine?
- Regular unleaded gasoline is ok. Do not use gasoline containing ethanol in excess of 10 percent.
- How do I check the oil level?
- The procedure for checking the ill level is remove the dipstick from the fill opening wipe it dry and put it back without screwing it in, remove it again to check the oil level.
- What maintenance is required for the mower blades?
- Mower blades have to be regularly sharpened as well as have their balance and damage checked, on damage being extreme replacement is necessary.
- What are my options if the engine does not fire?
- Ascertain whether the battery is charged, the transmission lever is set to neutral, and the switch for electric clutch is off.
- After what duration is an oil change warranted?
- As a rule of thumb, the engine oil and filter should be changed after every 50 hours of functioning. However, this should be done more often in extreme working conditions.
- In what manner is it possible to change the height of the cut grass?
- The cutter’s height can be adjusted at a range of 1 to 3.6 inches using a mower height adjuster.
- Are there mechanisms in place to prevent the engine from starting inadvertently?
- Indeed, there are mechanisms in place to prevent the engine from starting in case the operator has not taken certain precautions, and one of the precautions includes the safety clutch system fitted on the tractor.
User Manual
Loading...