Simplicity 1690557, 1691521, 1691522 User Manual
Specifications and Main Features
- Types Available for Purchase: Snow Thrower 36 - Mfg No:1691521, Snow thrower 42 - Mfg No: 1691522.
- Three dimensional measurements of the machine:
- Effective Width: Determined by the following
- 36 In. (914 mm)
- 42 In. (1067 mm)
- Overall Width: determined by the following
- 37-1/2 In. (953 mm)
- 43-1/2 In. (1105 mm)
- Overall Length: 27 In. (686 mm)
- Opening height: 19 In (483mm)
- Overall diameter of auger: 12 inches (305 mm).
- Three categories of Control:
- Auger Drive: Determined to be a V-Belt and an auger chain
- Raise and Lower: an optionally available electric/hydraulic lift or a spring-assisted tractor lift lever.
- Spout Rotation: An Electric spout rotator or Tee Handle located to the right of the operator.
- Drive Train:
- Input Drive: V belt with cushioning feature
- Final Drive: Chain roller with enclosure.
- Chassis:
- Auger Bearings: Incorporates self-aligning rollers which is outfitted with a lube fitting.
- Housing: Constructed using a welded steel channel & a stamp.
- Scraper Bar: An augmentation made using high carbon steel and which is replaceable.
- Other components include:
- Rear Wheel Weights
- Chains
- Power Lift Kit
- Snow Cab
- Electric Spout Rotator
Frequently Asked Questions
- Q: Give the effective widths of the snowthrower?
- A: This consturcitve possesses two models - model 1691521 and model 1691521, the effective width of the former is 36 inches whereas that of the later is 42 inches.
- Q: In what manner can I raise or lower the snow thrower?
A: The snow thrower can either be raised or lowered using a spring assist tractor lift lever, an optional electric lift or a hydraulic lift.
- Q: How much of a slope can the snow thrower operate on?
A: It is advised to employ rear wheel weights as well as tire chains for snow thrower slopes that are above 20 degrees.
- Q: What is the method employed to control the spout rotation?
A: Spout rotation can be controlled from a tee handle on the right of the operator or optionally together with an electric spout rotator.
- Q: What are the bearing types utilized in the augers?
A: The auger bearings are self aligning roller bearings and have a lube fitting.
- Q: What procedures are employed to maintain the snow throwers?
A: For regular maintenance, snow and ice from the device is cleaned out after every use, parts are lubricated as specified and the drive chains are checked.
User Manual
Loading...