Simplicity 1004, 1690238 User Manual

Specifications and Main Features

  • Model Number: 1004
  • Engine Manufacturer: Briggs & Stratton
  • Power Rating: 4 HP
  • Stroke: 1-7/8 Inches (47.6 mm)
  • Engine Cycle: 4
  • Engine Size: 11.44 Cu. In. (188 cc)
  • Number of Cylinders: 1
  • Cylinder Bore: 2-25/32 Inches (70 mm)
  • Crankshaft Orientation: Horizontal
  • Starter Type: Manual Rewind Easy-Spin
  • Choke Type: Manual
  • Governor Type: Air Vane
  • Ignition System Type: Magneto
  • Lubrication Method: Splash System
  • Engine Crankcase: 1-1/4 Pints (0.5 L)
  • Fuel Tank: 2 Quarts (1.9 L)
  • Type: Reusable Oiled Foam Element
  • Type: Quiet Low Back Pressure Type Side Discharge
  • Type: Worm and Gear
  • Material: Steel
  • Part: Bronze
  • Front End Bearing: Tapered Roller Bearing
  • Rear Bearing: Tapered Roller Bearing
  • Tine Shaft: Needle Roller Bearings
  • Case Material: Cast Iron
  • Number of Gears: One Forward One Reverse
  • Type: Touch-O-Matic V-Belt
  • Type: Self sharpening
  • Material: Forged High Carbon Steel
  • Width of Tilling: 24 Inches (609 mm) Norm, 35 Inches (889 mm) With Tine Extensions
  • Depth of Tilling: 0 to 6-3/4 Inches (0 to 171 mm) adjustable
  • Type: Pin and Cotter Pin
  • Engine Speed: 75 RPM at Full Engine Speed
  • Depth Bar: Tunable – Swings in Reverse
  • Control Positions.
  • Forward Clutch: On the Right Handle
  • Reverse Clutch: On the Left Handle
  • Throttle: On the Left Handle
  • Handles Height: Variable
  • Frame Material: Steel Electric Welded
  • Chassis Tires: Semi-Pneumatic 10 x 1,75(254 x 44 mm)
  • Total Length: 1143mm (45 inches)
  • Total Width:26 inches(660 mm) (Tine Extensions Not Included)
  • Height to Handle: 971 mm (38-1/4 Inches)
  • Height to Engine: 683 mm (26-1/2 Inches)
  • Mass: Net(Dry) 45.5 kg (100 Lbs.)

Frequently Asked Questions

Q: How Can I use The Rotary Tiller?

A: Operating a Rotary tiller is very easy simply engage the throttle lever halfway between the STOP IDLE and FAST levers exhaust fully out then grasp the recoil starter handle and pull straight out The engine is running, all that is required after is to put the choke knob back in and turn the throttle lever 45 degrees behind the position it is imagine the dial sitting clock wise start from 8 o six so it turns to 10’ clock This R Ensures The Engine Grades smoothly and the Rot to Turner starts working after The Retarded Throttle.

Q: Which Oil Should be effective With Rotary Engine?

A: Apply Best Engine Oil Of Grade SAE 30.

Q: On How Many Days I should Check The Oil Level?

A: Always Respond To Engine Oil Never Use Starting Without Checking Oil Level.

Q: Can the tiller be operated in reverse?

A: Yes, the tiller has reverse controls which allow it to operate in reverse.

Q: What is the maximum tilling depth?

A: Depth limitation is adjustable up to a maximum of 6 3/4 inches, or 171 mm.

Q: What do I do if the engine will not start?

A: Look to see if the fuel tank is empty, ensure the throttle lever is half open and see if the spark plug wire is fastened properly.

Q: Does the worm gear require some specific oil?

A: Yes, you should use a special worm gear oil as directed by the manufacturer.

User Manual

Simplicity 1004, 1690238 User Manual
Loading...
+ 22 hidden pages