Simplicity 1600 User Manual

Parts Manual

g

Broadmoor / 1600

Series Lawn Tractors & Mower Decks

18HP Product

Mf

. No. Description

1694630 Broadmoor, 18HP Hydro RMO 2690757 Broadmoor, 18HP Hydro RMO and 38" Mower Deck

20HP Product

Mfg. No. Description

1694633 1620H, 20HP Hydro RMO 1694682 Broadmoor, 20HP Hydro RMO 1695221 Broadmoor, 20HP B&S Hydro RMO (CE/Export) 2690755 Broadmoor, 20HP Hydro RMO and 50" Mower Deck 2690756 Broadmoor, 20HP Hydro RMP and 44" Mower Deck 2690758 1620HP, 20HP Hydro RMO and 44" Mower Deck 2690760 Broadmoor, 20HP Hydro RMO and 44" Mower Deck

(CE/Export)

Rev.

1735751 12/2007

Part No.:

TP 400-4806-00-BM-SA

Table Of Content

s

PRODUCT COMPONENTS PAGES

Frame & Front Axle Group ...................................................................................................................................

Steering Group - Manual Steering .......................................................................................................................

Engine & Electric Clutch Group - 16HP & 18HP Briggs & Stratton, Vanguard ...................................................

Engine & Electric Clutch Group - 18HP & 20HP Briggs & Stratton, Vanguard ...................................................

Transmission Group - Tuff Torq K-57 ..................................................................................................................

Transmission SERVICE PARTS - Tuff Torq K-57A .............................................................................................

Controls Group .....................................................................................................................................................

Cruise Control Group ...........................................................................................................................................

Electrical Group ....................................................................................................................................................

Hood, Grille & Dash Group ..................................................................................................................................

Seat & Seat Deck Group ......................................................................................................................................

Lift Group - Manual Lift ........................................................................................................................................

Lift Group - Manual Lift with Cruise Control .........................................................................................................

Wheels & Tires Group ..........................................................................................................................................

Decals - Brand & Model .......................................................................................................................................

Decals - Safety & Common ..................................................................................................................................

38" Mower Deck - Clutch & Support Group .........................................................................................................

38" Mower Deck - Height Adjustment & Roller Bar Group ..................................................................................

38" Mower Deck - Housing, Arbors & Blades Group ...........................................................................................

44" Mower Deck - Belt, Idler Arm & Hitch ............................................................................................................

44" Mower Deck - Height Adjustment & Roller Bar Group ..................................................................................

44" Mower Deck -

50" Mower Deck - Clutch & Support ....................................................................................................................

50" Mower Deck - Height Adjustment & Roller Bar Group ..................................................................................

50" Mower Deck - Housing, Arbors & Blades Group ...........................................................................................

Housing, Arbors & Blades Group ...........................................................................................

10 12 14 18 20 22 26 28 30 32 34 36 38 40 42 46 48 50 54 58 60 62

Torque Specification Chart ..................................................................... Inside Back Cover

4 6 8

Frame & Front Axle Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986681

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

4

TP 400-4806-00-BM-SA

Frame & Front Axle Group

PART NO. DESCRIPTIONREF NO QTY.

NUT, Hex Flange Lock, 3/8-16 1 1930645SM 7 WASHER 2 1960035SM 2 NUT, Hex Flange, 5/8-11 3 2860646SM 1 PLATE, Axle 4 1722212ASM 1 TOWER & SUPPORT ASSEMBLY 5 1733765ASM 1 CAPSCREW, Hex Head Taptite, 3/8-16 x 3/4 6 1923683SM 4 SUPPORT 7 1723528ASM 1 CAPSCREW, Hex Head Taptite, 5/16-18 x 3/4 8 1664847SM 4 FRAME ASSEMBLY 9 1726989ASM 1 CAPSCREW, 5/8-11 x 3-1/2 10 2860645SM 1 FITTING, Grease for Wear Plate, 1/4-20, with Ball 11 1704314SM 2 CAPSCREW, Hex Head, Flange Lock, 3/8-16 x 3/4 12 1933260SM 4 LINK, Drag 13 1722541SM 1 WASHER 14 1922755SM 1 WASHER 15 1960103SM 2 NUT, Hex Jam, 1/2-20 16 1919262SM 1 JOINT, Ball 17 1702779SM 1 SPACER 18 1708236SM 1 CARRIAGE BOLT, 3/8-16 x 1 19 1931350SM 2 SPACER 20 1611705SM 2 ROD, Tie 21 1722626ASM 1 BUSHING 22 1721682SM 6 NUT, Hex Flange Lock, 7/16-14 23 1930650SM 2 FITTING, Lube 24 2821133SM 3 SPINDLE REPLACEMENT KIT, LH (Includes Ref. Nos. 22, 26, 27, 28, 29 & 30) 25 1686985SM 1 CAPSCREW, 3/8-16 x 7/8, GR8 26 2823485SM 1 WASHER, Spring, 3/8 27 1663151SM 1 HUB & ARM ASSEMBLY 28 1725112SM 1 KEY, Woodruff 29 2830671SM 1 SPINDLE, LH 30 1724264SM 1 AXLE ASSEMBLY, w/ LH Spindle, Complete (Includes Ref. Nos. 22, 24, 41, 42 & 43) 31 1722200ASM 1 CARRIAGE BOLT, 3/8-16 x 1-1/2 32 1931352SM 1 CAPSCREW, Hex Head, 7/16-14 x 2, GR8 33 1927531SM 2 HOOK, "J" 34 1721918ASM 1 SPACER 35 1721752SM 1 SCREW, Torx Head, 5/16-18 x 7/8 36 1960086SM 4 BUMPER, Black, Steel, Standard 37 1721805ASM 1 BUMPER, Chrome, Optional 37 1723502SM 1 CAPSCREW, Hex Whiz Lock, 5/16-18 x 3/4 38 1930591SM 2 PLATE, Axle Wear 39 1724801ASM 1 NUT, Hex Falnge Whiz Lock, 5/16-18 40 1931277SM 2 SPINDLE, RH 41 1722199SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

5

TP 400-4806-00-BM-SA

Steering Group - Manual Steering

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

985890

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

6

TP 400-4806-00-BM-SA

Steering Group - Manual Steering

PART NO. DESCRIPTIONREF NO QTY.

STEERING WHEEL, Straight, Shaft 1 1722318SM 1 CAP, Steering Wheel, SMI Logo 2 1722319SM 1 CAP, Steering Wheel, Plain 2 1725024SM 1 PIN, Spring, 5/16 x 2-1/2 3 1960540SM 1 COVER, Rubber, Upper Steering Shaft 4 1722749SM 1 WASHER, 3/4 5 1960114SM 5 BUSHING, 15/32 x 7/8 x 7/8, Nylon 6 2176440SM 2 NUT, Hex KEPS 5/6-18 7 1960636SM 2 PLATE, Mounting Steering 8 1721736ASM 1 NUT, Push 9 1933988SM 2 CARRIAGE BOLT, 5/16-18 x 1-1/4 10 1960655SM 2 GEAR & SHAFT ASSEMBLY, Steering 11 1724470ASM 1 CAPSCREW, Hex Head, 3/8-16 x 1-1/4, Black 12 1960032SM 1 NUT, Hex Flange Two-Way Lock, 3/8-16 13 1930645SM 1 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 14 1664847SM 2 SHAFT & PINION ASSEMBLY, Steering Manual 15 1721626SM 1 RING, Clipring Extension 16 1611710SM 1 BEARING, 3/4 x 1-11/16 x 13/16, 3" Long Housing 17 1722459SM 1 SPACER, 3/4 x 1-1/16 x 3/8, Powder Metal 18 1722461SM 1 NUT, Hex Flange Whiz Lock, 3/8-16, Small 19 1931211SM 2 CAPSCREW, Hex Whiz Lock Flange, 3/8-16 x 3/4, Black 20 1933260SM 2 PIN, Cotter, 1-1/4, Black 21 1919314SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

7

TP 400-4806-00-BM-SA

Engine & Electric Clutch Group - 16HP & 18HP Briggs & Stratton, Vanguard

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986252

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 2690757 - Broadmoor

2007

8

TP 400-4806-00-BM-SA

Engine & Electric Clutch Group - 16HP & 18HP Briggs & Stratton, Vanguard

PART NO. DESCRIPTIONREF NO QTY.

HOSE, Oil Drain, 10-1/2" Long, 3/8-18 Fittings 1 1723165SM 1 ENGINE, 16HP Briggs & Stratton Vanguard Twin, Model 303777, Type 1114-E1 2* 1 ENGINE, 18HP Briggs & Stratton Vanguard Twin, Model 356777, Type 0113-E1 2* 1 SEAL, Circle, 16HP Only 3 1722950SM 1 BULKHEAD 4 1722388ASM 1 CAPSCREW, Hex Washer Head Taptite, 1/2-20 x 1/2, Black 5 1925003SM 2 CONTROL, Throttle Double 39" Long w/Knobs 6 1727223SM 1 TIE, Wire, 7-5/16" Long 7 1701011SM 2 CLAMP, Hose Type E 8 2860112SM 2 HOSE, Fuel, 59" Long 9 1718678SM 1 SHIELD, Side 10 1722392ASM 2 CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 3/8 11 1929000SM 8 PULLEY & HUB ASSEMBLY 12 1722288SM 1 TIE, Self Locking, 3-5/8 Long 13 2832747SM 1 WASHER, Hex, 7/16, Black 14 1708264SM 1 LOCKWASHER, 7/16 15 1918199SM 1 CAPSCREW, Hex Head, 7/16-20 x 3-3/4 16 1960648SM 1 CLUTCH, Electric 17 1686880SM 1 KEY, HI PRO, 1/4 x 2 1/2 18 1720463SM 1 CAPSCREW, Hex Washer Head Taptite, 3/8-16 x 1-1/2 19 2830598SM 4 LOCKWASHER, External Tooth, 3/8 20 2820427SM 1 SHIELD, Muffler Bottom 21 1722414ASM 1 NUT, Speed, 1/4-20, Lug 22 1960368SM 8 CAPSCREW, Hex Flange Whiz Lock, 1/4-20 x 5/8 23 1960295SM 4 NUT, Speed, 5/16-18, Lug, Black 24 1935255SM 2 DUCT, Muffler Top 25 1722389ASM 1 CLIP, Wire 1/8 26 2834683SM 2 DUCT, Muffler Extension 27 1722390ASM 1 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 1/2, Black 28 1924856SM 2 MUFFLER, Briggs & Stratton, Vanguard Twin 29 1722625SM 1 GASKET, Briggs & Stratton, Vanguard Twin 30 * 1 LOCKWASHER, 5/16 31 1917356SM 4 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 7/8 32 2860660SM 4 RETAINER, Clutch 2986413 - 18HP B&S Vanguard (Twin) 33 1732026SM 1 WASHER, Flat 3/8 2986413 - 18HP B&S Vanguard (Twin) 34 1924940SM 1 CAPSCREW, 3/8-16 x 1 2986413 - 18HP B&S Vanguard (Twin) 35 2827187SM 1

Footnotes

Note* See your local Briggs & Stratton distributor for parts and service.

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 2690757 - Broadmoor

2007

9

TP 400-4806-00-BM-SA

Engine & Electric Clutch Group - 18HP & 20HP Briggs & Stratton, Vanguard

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986773

The above parts group applies to the following Mfg. Nos.:

1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor 2690758 - 1620HP

2007

2690760 - Broadmoor

10

TP 400-4806-00-BM-SA

Engine & Electric Clutch Group - 18HP & 20HP Briggs & Stratton, Vanguard

PART NO. DESCRIPTIONREF NO QTY.

HOSE, Oil Drain, 10-1/2" Long, 3/8-18 Fittings 1 1723165SM 1 ENGINE, 18HP Briggs & Stratton Vanguard Twin, Model 356777, Type 0113-E1 2* 1 ENGINE, 20HP Briggs & Stratton Vanguard Twin, Model 358777, Type 0110-E1 2* 1 SEAL, Circle, 18HP & 20HP 3 1722949SM 1 BULKHEAD 4 1722388ASM 1 CAPSCREW, Hex Washer Head Taptite, 1/2-20 x 1/2, Black 5 1925003SM 2 CONTROL, Throttle Double 39" Long w/Knobs 6 1727223SM 1 TIE, Wire, 7-5/16" Long 7 1701011SM 2 CLAMP, Hose Type E 8 2860112SM 2 HOSE, Fuel, 59" Long 9 1718678SM 1 SHIELD, Side 10 1722392ASM 2 CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 3/8 11 1929000SM 8 PULLEY & HUB ASSEMBLY 12 1722288SM 1 TIE, Self Locking, 3-5/8 Long 13 2832747SM 1 WASHER, Hex, 7/16, Black 14 1708264SM 1 LOCKWASHER, 7/16 15 1918199SM 1 CAPSCREW, Hex Head, 7/16-20 x 3-1/2, 20HP 16 1960649SM 1 CAPSCREW, Hex Head, 7/16-20 x 2-3/4, 20HP 16 1960648SM 1 CLUTCH, Electric, 18HP 17 1686883SM 1 CLUTCH, Electric, 20HP 17 1686880SM 1 KEY, HI PRO, 1/4 x 2 1/2 18 1720463SM 1 CAPSCREW, Hex Washer Head Taptite, 3/8-16 x 1-1/2 19 2830598SM 4 LOCKWASHER, External Tooth, 3/8 20 2820427SM 1 SHIELD, Muffler Bottom 21 1722414ASM 1 NUT, Speed, 1/4-20, Lug 22 1960368SM 8 CAPSCREW, Hex Flange Whiz Lock, 1/4-20 x 5/8 23 1960295SM 4 NUT, Speed, 5/16-18, Lug, Black 24 1935255SM 2 DUCT, Muffler Top 25 1722389ASM 1 CLIP, Wire 1/8 26 2834683SM 2 DUCT, Muffler Extension 27 1722390ASM 1 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 1/2, Black 28 1924856SM 2 MUFFLER, Briggs & Stratton, Vanguard Twin 29 1722625SM 1 GASKET, Briggs & Stratton, Vanguard Twin 30 * 1 LOCKWASHER, 5/16 31 1917356SM 4 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 7/8 32 2860660SM 4

Footnotes

Note* See your local Briggs & Stratton distributor for parts and service.

The above parts group applies to the following Mfg. Nos.:

1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor 2690758 - 1620HP

2007

2690760 - Broadmoor

11

TP 400-4806-00-BM-SA

Transmission Group - Tuff Torq K-57

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986603

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

12

TP 400-4806-00-BM-SA

Transmission Group - Tuff Torq K-57

PART NO. DESCRIPTIONREF NO QTY.

SCREW, Pan Head Torx Taptite, 1/4-20 x 1-1/4, Black 1 1960676SM 2 PAD, Footrest, LH, without Differential Lock 2 1722345SM 1 PAD, Footrest, RH 3 1722173SM 1 NUT, Hex KEPS, 5/16-18, Black 4 1960636SM 1 FASTENER, Panel 5 1704351SM 15 NUT, Hex KEPS, 3/8-16, Black 6 1960637SM 6 CARRIAGE BOLT, 3/8-16 x 1, Black 7 1931350SM 6 NUT, Hex Flange ESNA, 5/16-18, Black 8 1960686SM 5 SUPPORT, Transmission 9 1721728ASM 2 RING, Snap, Transmission 10 1724316SM 1 CAPSCREW, Hex Head 5/16-18 x 2 G5 11 1921978SM 1 STRAP, Torque 12 1721592ASM 1 WASHER, 5/16, Black 13 1960141SM 1 CARRIAGE BOLT, 5/16-18 x 1, Black 14 1931335SM 1 WASHER, 1/2 15 1960027SM 2 PULLEY & HUB ASSEMBLY 16 1721666SM 1 V-BELT, Drive 17 1726841SM 1 ROD, Transmission Release 18 1726806SM 1 PIN, Quick 19 1722460SM 3 CAPSCREW, Hex Head, 5/16-18 x 2 20 1921332SM 1 WASHER, 5/16, Black 21 1919326SM 4 CAPSCREW, Hex Head, 5/16-18 x 2-3/4, Black 22 1923141SM 4 WASHER, 15/32 x 15/16, Black 23 1918267SM 1 PIN, Cotter, Black 24 1918447SM 1 ROD, Brake 25 1726871SM 1 SPRING, Compression, 3-1/4" Long, Black 26 1722684SM 1 SPRING, Compression, 3-5/8" Long, Black 27 1729277SM 1 NUT, Hex FlangeESNA, 3/8-16, Black 28 1960687SM 1 WASHER, 3/8, Black 29 1924940SM 3 TRANSMISSION ASSEMBLY, K57, without Pulley 30 1722668SM 1 CONTROL ARM ASSEMBLY 31 1732190ASM 1 ARM, Control 32 1724423ASM 1 NUT, KEPS Lock, 5/16-18 33 1960636SM 2 ACTUATOR, Switch 34 1727215ASM 1 CAPSCREW, Hex Head Taptite, 5/16-18 x 1/2 35 1924856SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

13

TP 400-4806-00-BM-SA

Transmission SERVICE PARTS - Tuff Torq K-57A

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1722668

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690760 - Broadmoor

14

TP 400-4806-00-BM-SA

Transmission SERVICE PARTS - Tuff Torq K-57A

PART NO. DESCRIPTIONREF NO QTY.

HOUSING ASSEMBLY, UPPER 2 1724951SM 1 HOUSING, LOWER 3 1724938SM 1 VENT VALVE 15 7 1718052SM 1 MAGNET, K50 8 1724279SM 2 HOLDER, MAGNET 9 1724280SM 1 SPRING 11 1725730SM 1 SHAFT, BYPASS 12 1724281SM 1 LEVER, BYPASS 13 1720418SM 1 RING 14 1718061SM 1 SEALING CAP 15 1724282SM 1 RING 35 16 1708650SM 1 PACKING 19 1708691SM 2 SEAL TC 20 1708651SM 1 SCREW, TAPPING 21 1707789SM 14 SCREW, TAPPING 22 1724284SM 2 CASE, CENTER 24 1724939SM 1 PIN 3 x 9.8 25 1718070SM 1 FILTER 26 1724954SM 1 BOLT 10 x 75 27 1720805SM 3 VALVE, IDS 1.0 28 1724286SM 2 SPRING, IDS 29 1724287SM 2 BALL, 3/16 30 1724288SM 2 CYLINDER BLOCK ASSEMBLY 31 1724940SM 1 SPRING, PUMP 32 1724290SM 1 SHAFT, PUMP 33 1724941SM 1 RING E15 34 1718076SM 3 BEARING 35 1708673SM 1 HOUSING 36 1718077SM 1 BEARING, THRUST 37 1724942SM 1 BLOCK, CYLINDER 38 1718079SM 1 WASHER 12 x 24 x 1 39 1718084SM 1 SHAFT, MOTOR 40 1724943SM 1 RING 15 41 1708672SM 1 GEAR, MOTOR 42 1724944SM 1 BEARING 6202UC3 43 1718083SM 1 THRUST METAL 44 1718089SM 2 SWASH PLATE ASSEMBLY 45 1720426SM 1 THRUST PLATE B 46 1718088SM 1 BEARING K81105 47 1718086SM 1 THRUST PLATE A 48 1718087SM 1 SHAFT, CONTROL 49 1724343SM 1 FULCRUM, ECCENTRIC 50 1724344SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690760 - Broadmoor

15

TP 400-4806-00-BM-SA

Transmission SERVICE PARTS - Tuff Torq K-57A

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1722668

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690760 - Broadmoor

16

TP 400-4806-00-BM-SA

Transmission SERVICE PARTS - Tuff Torq K-57A

PART NO. DESCRIPTIONREF NO QTY.

PLATE, JERK 54 1724348SM 1 WASHER 55 1708689SM 1 PIN, COTTER 56 1724349SM 1 PIN, SPRING 57 1724296SM 1 PACKING 59 1707879SM 2 PIN 6.0A x 4.0 58 1718100SM 1 NUT 12 60 1708692SM 1 GEAR & PINION ASSEMBLY 61 1724955SM 1 GEAR, FINAL CONTR TRAC 62 1724945SM 1 COLLAR, PINION 63 1724946SM 2 SHAFT, REDUCTION 64 1724947SM 1 WASHER, 12 x 32 x 3.2 65 1724948SM 2 GEAR, REDUCTION 66 1724949SM 1 PINION, FINAL 67 1724950SM 1 SHAFT, AXLE RH 68 1724304SM 1 SHAFT, AXLE LH 69 1724303SM 1 WASHER, THRUST 70 1718112SM 2 RING 17 71 1718113SM 2 SEAL 19 x 32 x 8 72 1718111SM 2 BUSHING 19 x 21 73 1718110SM 2 SHOE, BRAKE 75 1724305SM 1 ARM, BRAKE 76 1724306SM 1 SHAFT, BRAKE 77 1724307SM 1 SPRING, RETURN B 78 1724308SM 1 BRAKE, ACTUATOR 79 1724309SM 1 PIN 80 1724310SM 1 PACKING 81 1708690SM 2 PIN, SPRING 82 1724311SM 2 COLLAR, SPLINE 83 1724312SM 2 FAN 85 1724314SM 1 LOCKWASHER 86 1724315SM 1 RING, SNAP 87 1724316SM 1 PIN 3.0A x 20 90 1707839SM 1 OIL SEAL 91 1724318SM 1 PIN, ROLL 95 1707839SM 1 WASHER, THRUST DIFF 97 1724956SM 2 PIN, 3.0A x 18 98 1724958SM 2 SPRING, CHARGE 99 1724957SM 1 CHARGE PUMP CASE ASSEMBLY 100 1724953SM 1 K57 SMP SEAL KIT 200 1727542SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690760 - Broadmoor

17

TP 400-4806-00-BM-SA

Controls Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986599

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

18

TP 400-4806-00-BM-SA

Controls Group

PART NO. DESCRIPTIONREF NO QTY.

ROD, Brake Lock 1 1721353SM 1 KNOB, Push On, Red Plastic "P" 2 1721891SM 1 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4 3 1930591SM 1 WASHER, 5/16, Black 4 1919326SM 2 ROD, Brake 5 1721476SM 1 CARRIAGE BOLT, 3/8-16 x 1 3/4 6 1931353SM 2 BUSHING, 5/8 x 3/4 x 3/4, Nylon 7 1663114SM 2 FITTING, Lube, 1/4 8 2821133SM 1 SPRING, Extension 9 1725250SM 1 PIN, Quick 10 1722460SM 3 ARM & HUB ASSEMBLY, Idler 11 1724917SM 1 WASHER, 5/8 12 1960020SM 1 RING, Clipring Extension 13 1704420SM 1 PULLEY, w/Bearing 14 1721134SM 1 WASHER, 3/8 15 1924940SM 1 NUT, Hex Flange ESNA, 3/8-16 16 1960687SM 2 PULLEY, Idler 17 1721133SM 1 BUSHING, 1 x 1-1/8 x 5/8, Nylon 18 1723237SM 2 ARM, Brake 19 1722513SM 1 PEDAL ASSEMBLY, Foot 20 1726763SM 1 CARRIAGE BOLT, 1/4-20 x 1-1/4 21 1931320SM 1 PIN, Cotter, Black 22 1918447SM 1 LATCH, Brake 23 1721354ASM 1 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 24 1664847SM 3 NUT, Hex Lock ESNA Light, 5/16-18 25 1919438SM 1 WASHER, 5/16, Black 26 1919381SM 1 NUT, Hex Flange Whiz Lock Large, 5/16-18 27 1927557SM 2 PEDAL, Brake 28 1722535ASM 1 PAD, Brake Pedal 29 1721577SM 1 CARRIAGE BOLT, 5/16-18 x 7/8 30 1931334SM 4 CAPSCREW, 5/16-18 x 1 31 1921333SM 2 ACTUATOR, Switch 2.53" Long 32 1722083ASM 1 CAPSCREW, Hex Washer Head Taptite, 3/8-16 x 3/4 33 1923683SM 1 PEDAL, Forward 34 1722070ASM 1 NUT, Hex KEPS, 5/16-18 35 1960636SM 4 PAD, Foot Pedal Forward 36 1721675SM 1 PEDAL, Reverse 37 1722071ASM 1 PAD, Foot Pedal Reverse 38 1721674SM 1 NUT, Hex Lock ESNA Light, 1/4-20 39 1920397SM 1 CAM, Roller 40 1686612SM 1 SPRING, Extension 41 1721995SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

19

TP 400-4806-00-BM-SA

Cruise Control Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986190

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690760 - Broadmoor

20

TP 400-4806-00-BM-SA

Cruise Control Group

PART NO. DESCRIPTIONREF NO QTY.

DECAL, Cruise & Lift 1 1723713SM 1 SCREW, Torque Head Plus Socket Head, 1/4-20 x 7/8 2 1960666SM 1 KNOB, Cruise 3 1722303SM 1 NUT, Hex Lock ESNA Light, 1/4-20 4 1920397SM 1 LEVER & BRACKET ASSEMBLY, Cruise 5 1722003SM 1 WASHER, 3/8, Black 6 1960103SM 2 CARRIAGE BOLT, 5/16-18 x 3/4 7 1931333SM 1 WASHER, 9/16 x 1-1/4 x 1/8 8 1926192SM 2 SPACER, w/Flange, 11/32 x 15/32 x 3/4 9 1709043SM 1 CARRIAGE BOLT, 5/16-18 x 2 3/4 10 1931342SM 1 CARRIAGE BOLT, 5/16-18 x 2-1/4 11 1960273SM 1 PIN, Quick 12 1722460SM 2 ROD, Cruise 13 1722117SM 1 ROD, Return 14 1733719SM 1 SPRING, Cruise Return to Frame 15 2159106SM 1 NUT, Hex KEPS, 5/16-18 16 1960636SM 2 CAPSCREW, Hex Washer Head Plastite, 10-14 x 5/8 17 1960001SM 2 SWITCH, Push, Neutral Start, Gray 18 1717050SM 1 SPACER, 11/32 x 5/8 x 1-13/32 19 1722080SM 1 WASHER, 5/16, Black 20 1919326SM 1 WASHER, 5/16, Black 21 1919381SM 1 NUT, Hex Lock ESNA Light, 5/16-18 22 1919438SM 1 SPRING, Compression 23 1677746SM 1 PIN, Cotter 24 1918447SM 1 DISC, Fricion 25 1705928SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690760 - Broadmoor

21

TP 400-4806-00-BM-SA

Electrical Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986604

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

22

TP 400-4806-00-BM-SA

Electrical Group

PART NO. DESCRIPTIONREF NO QTY.

Footnotes

HEADLIGHT ASSEMBLY, 4 Bulb, (Includes Ref. Nos. 2 & 3) 1 1721810SM 1 BULB, Headlight, 12.8V 2 1677371SM 4 SOCKET ASSEMBLY, Headlight, Sealed 3 1723451SM 4 HARNESS, Headlight 4 1722669SM 1 SWITCH, PTO Push/Pull Symbols 5 1722887SM 1 MODULE, RMO (Includes Ref. No. 7) 6 1726556SM 1 KEY, RMO Module Plastic 7 1726557SM 1 CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 1/2, Black 8 1925003SM 2 BREAKER, Circuit, 12 Volt 20 Amps 9 1665238SM 1 WIRE, 12GA 5-15/16 Long, Red 10 1665237SM 1 PLUG, Hole, Square 11 1722611SM 1 HOUR METER, (Includes Ref. Nos. 12) 12 1731184SM 1 PLUG, Dash 13 1725524SM 1 CLIP, Hour Meter (Service Only) 14 1725835SM 1 NUT, Hex, 5/16-24 15 2820263SM 2 LOCKWASHER, External Tooth, 5/16 16 2820426SM 3 SOLENOID 17 1722739SM 1 SWITCH ASSEMBLY, Ignition, 6 Pin, (Includes Ref. Nos. 17, 18, 19, 20 & 21) 18 1686734SM 1 KEYS, Set of 2 19 1717163SM 1 COVER, For Ignition Switch, Plastic 20 1717550SM 1 NUT, Hex Flange, 5/8-32, Ignition Switch 21 1717549SM 1 LOCKWASHER, Internal Tooth, 5/8, Thin 22 1960547SM 1 WASHER, Shim 23 2101025SM 1 TIE, Strap, 7-5/16 Long 24 1701011SM 3 SWITCH, Headlights , 2 Terminal 25 1716951SM 1 BOOT, Insulator Cable Terminal, 1-15/16 Long, Red 26 1713535SM 1 CABLE, #6 x 25" Long, Ring Terminals 27 1721830SM 1 CABLE, #6 x 8" Long, Ring Terminals 28 1603618SM 1 BOOT, Insulator Battery Terminal 29 1677296SM 1 NUT, Hex, 1/4-20 30 2816622SM 3 LOCKWASHER, 1/4 31 2816964SM 2 WASHER, 1/4 32 2821319SM 2 CAPSCREW, Hex Head, 1/4-20 x 3/4 33 2823341SM 2 CABLE, #6 x 26 Long, Ring Terminal 34 1713163SM 1 BATTERY, 12 Volt 35 1685215SM 1 STRAP, Battery, 14 Long, Rubber 36 1722009SM 1 CAPSCREW, Hex Head Taptite, 1/4-20 x 3/8 37 1929000SM 2 BRACKET, Switch Mount 38 1726810ASM 1 SWITCH, Reverse Pedal 39 1732004SM 1 SWITCH, Push Button, Foot Pedal 40 1732006SM 1 SWITCH, Cruise Control, Grey, NO 41 1717050SM 1 CAPSCREW, Hex Washer Head Plastite, 1/4 x 1/2 42 1960536SM 2

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

23

TP 400-4806-00-BM-SA

Electrical Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986604

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

24

TP 400-4806-00-BM-SA

Electrical Group

PART NO. DESCRIPTIONREF NO QTY.

WIRING ASSEMBLY, All Conditions Shutdown (CE/Export) 45 1734025SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

25

TP 400-4806-00-BM-SA

Hood, Grille & Dash Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986608

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

26

TP 400-4806-00-BM-SA

Hood, Grille & Dash Group

PART NO. DESCRIPTIONREF NO QTY.

PANEL, RH Side 1 1721804CSM 1 PANEL, RH Side, Red 1 1721804DSM 1 HOOD, with Scoop, Red 2 1728031DSM 1 HOOD, with Louvers 3 1722110CSM 1 CAPSCREW, Hex Head Flange Lock,1/4-20 x 5/8 4 1960295SM 12 SCREW, Phillips Head, #10-24 x 1/2 5 1960392SM 1 DASHBOARD, RMO, Black 6 1687054SM 1 DASHBOARD, RMO with Hydra Lift Slot, Black 6 1687055SM 1 NUT, Hex Nylock,#10-24 7 1933896SM 1 ROD, Dash Support 8 1723123SM 1 NUT, Hex Flange Lock, 1/4-20 9 1930641SM 12 PANEL, LH Side 10 1721803CSM 1 PANEL, LH Side, Red 10 1721803DSM 1 HINGE, LH 11 1721808ASM 1 DUCT, Air Inlet 12 1733457ASM 1 GRILLE 13 1721802CSM 1 GRILLE, Red 13 1721802DSM 1 HEADLIGHT ASSEMBLY (Includes Ref. Nos. 15 & 16) 14 1721810SM 1 BULB, Headligh 15 1677371SM 4 SOCKET, Headlight 16 1723451SM 4 HINGE, RH 17 1721809ASM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

27

TP 400-4806-00-BM-SA

Seat & Seat Deck Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

985908

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

28

TP 400-4806-00-BM-SA

Seat & Seat Deck Group

PART NO. DESCRIPTIONREF NO QTY.

BRACKET, 1-5/8 x 1-3/4 1 1722129ASM 1 * SEAT, 18" Back, Optional 2 1687199SM 1 * SEAT, 15" Back, Standard 2 1687201SM 1 SUPPORT, Seat 3 1722128ASM 1 CLIP, Wire 4 2172434SM 1 WASHER, Spring, 5/16 x 1-1/4, Black 5 1709256SM 2 SPRING, Compression 6 1714263SM 2 NUT, Hex Lock, ESNA Light 5/16-18 7 1919438SM 10 SPRING, Compression 8 1717051SM 2 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4 9 1930591SM 8 CARRIAGE BOLT, 5/16-18 x 2 10 1931339SM 2 CARRIAGE BOLT, 3/8-16 x 1 11 1931350SM 2 SLIDE, Seat 12 1722356SM 1 NUT, Speed, 5/16-18, Lug 13 1935255SM 4 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 5/8 14 1930601SM 4 PLUG, Plastic 15 1722309SM 2 POD, with Cup Holder, LH 16 1729711SM 1 FUEL GAUGE 17 1722300SM 1 GROMMET 18 1722337SM 1 CAPSCREW, Hex Head Dog Point, 1/4-20 x 7/8 19 2860664SM 8 NUT, Hex Flange Whiz Lock, 5/16-18 20 1931277SM 4 CAP, Gas 21 1715917SM 1 TUBE & ELBOW ASSEMBLY 22 1722340SM 1 BUSHING, 3/8 x 9/16 x 5/8, Rubber 23 1654930SM 1 TANK, Fuel 24 1722432SM 1 NUT, Hex KEPS, 5/16-18 25 1960636SM 8 DECK, Seat, Orange 26 1722106CSM 1 DECK, Seat, Red 26 1722106DSM 1 POD, RH with 2 Slots 27 1722108SM 1 TUNNEL, Orange 28 1722105CSM 1 TUNNEL, Red 28 1722105DSM 1 SPACER, 25/64 x 5/8 x 3/16, Hardened 29 1663752SM 2 NUT, Hex Flange Two-Way Lock, 3/8-16 30 1930645SM 2 WASHER, 3/8 31 1924940SM 2 CAPSCREW, Hex Flange Whiz Lock Dog Point, 5/16-18 x 1 32 1960667SM 4

Footnotes

Note* Arm Rest Kit - 1686907

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

29

TP 400-4806-00-BM-SA

Lift Group - Manual Lift

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986412

The above parts group applies to the following Mfg. Nos.:

2690755 - Broadmoor

2007

30

TP 400-4806-00-BM-SA

Lift Group - Manual Lift

PART NO. DESCRIPTIONREF NO QTY.

GRIP, Black Vinyl 1 1722302SM 1 ROD, Lift Lever with Flats 2 1722024ASM 1 NUT, Hex Flange Lock, 3/8-16 3 1930645SM 1 WASHER 4 1924940SM 1 PIN, Quick 5 1722460SM 2 SPRING, Compression 6 2162085SM 1 NUT, Push, 3/8 7 1723866SM 1 CAPSCREW, Hex Head, 1/4-20 x 3/4 8 1923341SM 2 QUADRANT 9 1722284ASM 1 NUT, Hex Lock ESNA, 1/4-20 10 1920397SM 2 CAPSCREW, Hex Head, 3/8-16 x 2 11 1923701SM 1 NUT, KEPS Lock, 5/16-18 12 1960636SM 4 SCREW, Torx Head, # 8-16 x 1/2 13 1722607SM 1 COVER, Dash 14 1722285SM 1 SPRING, Extension, 4-1/8 15 2156302SM 1 LIFT SHAFT ASSEMBLY, 16 1727437ASM 1 CARIAGE BOLT, 5/16-18 x 3/4 17 1931333SM 4 ROD, Lift 18 1725638SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690755 - Broadmoor

2007

31

TP 400-4806-00-BM-SA

Lift Group - Manual Lift with Cruise Control

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986780

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690756 - Broadmoor 2690757 - Broadmoor

2007

2690758 - 1620HP 2690760 - Broadmoor

32

TP 400-4806-00-BM-SA

Lift Group - Manual Lift with Cruise Control

PART NO. DESCRIPTIONREF NO QTY.

GRIP, Black Vinyl 1 1722302SM 1 ROD, Lift Lever with Flats 2 1722024ASM 1 NUT, Hex Flange Lock, 3/8-16 3 1930645SM 1 WASHER 4 1924940SM 1 PIN, Quick 5 1722460SM 2 SPRING, Compression 6 2162085SM 1 NUT, Push, 3/8 7 1723866SM 1 CAPSCREW, Hex Head, 1/4-20 x 3/4 8 1923341SM 2 PLUG, Lift Cover (Models without Cruise Control) 9 1722313SM 1 QUADRANT 10 1722284ASM 1 NUT, Hex Lock ESNA, 1/4-20 11 1920397SM 2 CAPSCREW, Hex Head, 3/8-16 x 2 12 1923701SM 1 NUT, ESNA Lock, 5/16-18 13 1919438SM 4 WASHER, Flat, 5/16 x 1-1/4 14 1960044SM 1 CAM ASSEMBLY, Lift 15 1722491SM 1 SPACER 16 1704629SM 1 LINK, Lift Upper 17 1727083ASM 1 SCREW, Torx Head, # 8-16 x 1/2 18 1722607SM 1 COVER, Dash 19 1722285SM 1 CAPSCREW, Hex Head, 5/16-18 x 1-1/4 20 1921977SM 4 ROD, Lift 21 1721789SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690756 - Broadmoor 2690757 - Broadmoor

2007

2690758 - 1620HP 2690760 - Broadmoor

33

TP 400-4806-00-BM-SA

Wheels & Tires Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

W986614

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

34

TP 400-4806-00-BM-SA

Wheels & Tires Group

PART NO. DESCRIPTIONREF NO QTY.

WHEEL & TIRE ASSEMBLY, Front, (Includes Ref. Nos. 2, 3, 4, 5, & 6) 1 1732202SM 2 TIRE, 15 x 6, Super Turf 2 1722838SM 1 TUBE, Tire, Front, 4.10/3.50 3 1664090SM 1 BEARING, Ball 4 1717056SM 2 WHEEL, 4-1/2" x 6" 5 1722837SM 1 VALVE STEM & CAP ASSEMBLY 6 2172353SM 4 WASHER, Flat 1 (Double D) 7 1722726SM 2 WASHER, 1, (As Required for All Front) 8 1919394SM 4 RING, Retaining, External #98 9 2832577SM 2 CAP, Hub, Gray 10 1722676SM 4 KEY, Parellel, 3/16 x 3/16 x 1-1/2 11 1729279SM 2 WASHER, 3/4 12 2860202SM 4 WASHER 13 1960114SM 2 WHEEL & TIRE ASSEMBLY, (Includes Ref. Nos. 6, 15, 16 & 17) 14 1726491SM 2 TIRE, 22 x 10, 10 Super Turf 15 1727136SM 1 TUBE, Tire, 20 x 8, Rear 16 2173477SM 1 WHEEL, 7 x 9.97, W/ 3/4 OD Shaft 17 1726492SM 1 WASHER, Special 18 1722717SM 2 RING, "E" External 19 2827794SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

35

TP 400-4806-00-BM-SA

Decals - Brand & Model

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

B986614

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

36

TP 400-4806-00-BM-SA

Decals - Brand & Model

PART NO. DESCRIPTIONREF NO QTY.

DECAL, ICON Simplicity, Orange 1 1731418SM 1 DECAL, Simplicity, Silver & Blue w/Icon 2 1722551SM 3 DECAL, Broadmoor, Silver & Blue 3 1722776SM 1 DECAL, Hood Stripe, RH, Simplicity, Blue & Silver 4 1722773SM 1 DECAL, Hood Stripe, LH, Simplicity, Blue & Silver 4 1722774SM 1 DECAL, AGCO, Logo Black, Chrome, Orange 5 1708926SM 1 DECAL, 1620, White, AGCO 6 1727069SM 1 DECAL, Hood Stripe, RH, AGCO 7 1722818SM 1 DECAL, Hood Stripe, LH, AGCO 7 1722817SM 1 DECAL, Massey Ferguson Logo, 3 Triangles 8 1714363SM 1 DECAL, 2618, Black, Massey Ferguson 9 1725646SM 1 DECAL, 2618, Cool Grey, Massey Ferguson 9 1728112SM 1 DECAL, 2620, Black, Massey Ferguson 9 1727070SM 2 DECAL, 2620, Cool Grey, Massey Ferguson 9 1728054SM 2 DECAL, Hood Stripe, LH, Massey Ferguson 10 1727783SM 1 DECAL, Hood Stripe, RH, Massey Ferguson 10 1727784SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

37

TP 400-4806-00-BM-SA

Decals - Safety & Common

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

C986614

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

38

TP 400-4806-00-BM-SA

Decals - Safety & Common

PART NO. DESCRIPTIONREF NO QTY.

DECAL, Ignition Switch Symbols, White/Black 1 1722806SM 1 DECAL, Automatic Control Traction 2 1718025SM 1 DECAL, 18HP 3 1722779SM DECAL, 20HP 3 1722780SM 1 DECAL, Tunnel Cover, Danger Slopes/Blades 4 1726923SM 1 DECAL, Tunnel Cover, Danger Slopes/Blades, (Export) 4 1734027SM 1 DECAL, Drive Belts, Mower Blades 5 1727014SM 1 DECAL, Protective Sticker 6 1723296SM 2 LABEL, Decibel, Power Mass (Export) 7* 1 DECAL, I.D. Plate 8* 1 DECAL, Touch Up Paint (Orange) 9 1720454SM 1 DECAL, Touch Up Paint (Red) 9 1725072SM 1 DECAL, Patent 10 * 1 DECAL, USA Logo Stars & Stripe 11 1708927 1 DECAL, Transmission Release Valve 12 1723160SM 1 DECAL, Danger Rotating Blades (Export) 13 1720389SM 2 DECAL, Danger Do Not Put Hands/Feet in Mower 14 1704276SM 1 DECAL, Free Floating Mower, Silver 15 1722771SM 1 DECAL, OPEI Certified 16 * 1 DECAL, 38", Silver on Black with Stripe 17 1722787SM 1 DECAL, 40", Silver on Black with Stripe 17 1722788SM 1 DECAL, 44", Silver on Black with Stripe 17 1722789SM 1 DECAL, 50", Silver on Black with Stripe 17 1722790SM 1 DECAL, Danger Do Not Operate Without Deflector 18 1704277SM 1 DECAL, Height of Cut, 38", 44" & 50" 19 1721197SM 1 DECAL, Height of Cut, 40" 20 1720919SM 1 DECAL, Deck Lift (Not Shown) 21 1723143SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1694630 - Broadmoor 1694633 - 1620H 1694682 - Broadmoor 1695221 - Broadmoor 2690755 - Broadmoor 2690756 - Broadmoor

2007

2690757 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

39

TP 400-4806-00-BM-SA

38" Mower Deck - Clutch & Support Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987893

The above parts group applies to the following Mfg. Nos.:

2690757 - Broadmoor

2007

40

TP 400-4806-00-BM-SA

38" Mower Deck - Clutch & Support Group

PART NO. DESCRIPTIONREF NO QTY.

CAPSCREW, Hex Head, 3/8-16 x 2-3/4 G5 1 1921973SM 1 WASHER, 3/8 2 1922755SM 1 PULLEY, Idler 3 1732360SM 1 SPACER 4 1729007SM 1 ARM, Idler 5 1734243ASM 1 NUT, Hex Flange 3/8-16 Whiz Lock Large 6 1928352SM 1 SPRING, Extension 7 1715435SM 1 NUT, Hex Flange 5/16-18 Two-Way Lock 8 1935048SM 1 WASHER, 3/8 9 1924356SM 4 NUT, Hex Flange 3/8-16 Machine Lock Large 10 1960339SM 1 CAPSCREW, Hex Head 3/8-16 x 2-1/4 G5 11 1922130SM 1 SPACER, Powdered Metal 12 1667812SM 1 V-BELT, HA 93.10 13 1732954SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690757 - Broadmoor

2007

41

TP 400-4806-00-BM-SA

38" Mower Deck - Height Adjustment & Roller Bar Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987894

The above parts group applies to the following Mfg. Nos.:

2690757 - Broadmoor

2007

42

TP 400-4806-00-BM-SA

38" Mower Deck - Height Adjustment & Roller Bar Group

PART NO. DESCRIPTIONREF NO QTY.

HITCH, Mower 1 1720044ASM 1 ROD, 3/8 Diameter 2 1715759SM 1 SPRING, Extension 3 2156302SM 1 ROD, 1/2 Diameter 4 1713578SM 1 NUT, Push for 1/2 Diameter Stud Capped 5 1960519SM 1 NUT, Hex Flange 3/8-16 Esna 6 1960687SM 2 SPACER, Powdered Metal 7 1732443SM 2 WASHER, 3/8 8 1924940SM 2 NUT, Hex Toplock Spiral Lock Flange 3/8-16 9 2860681SM 3 CAPSCREW, Hex Head 3/8-16 x 1-3/4 G8 11 1922606SM 1 SPACER, 3/8 x 3/4 x 15/16 12 1706644SM 1 CAPSCREW, Hex Head 5/16-18 x 7/8 G5 13 1923325SM 5 PLATE, Support 14 1704115ASM 1 ROD, 1/4 Diameter Indicator, Cutting Height 15 1732092SM 1 WASHER, 5/16 16 1919381SM 1 BAR, Roller Square Slot 5/16 Thick 17 1733117ASM 1 UPSTOP, 7GA 18 1733226ASM 1 NUT, Hex Adjusting, Powdered Metal 19 1704082SM 1 CLIP, Hair Pin 20 1960074SM 2 BOLT, Shoulder, 3/8-16 G5 21 2172622SM 1 WASHER, 1/2 22 1924361SM 1 SLIDE 23 1677507SM 1 NUT, Hex Jam 1/2-13 24 1913744SM 2 WASHER, 1/2 25 1960170SM 2 TRUNNION, Rod 26 1704081ASM 1 PIN, Round Head Drilled 3/8 x 2 27 2118053SM 1 SHAFT ASSEMBLY, Rocker 3/8" 28 1733118ASM 1 CARRIAGE BOLT, 3/8-16 x 1-1/2 G5 29 1931352SM 3 STRAP, Roller 30 1665374SM 2 SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 31 1664847SM 5 NUT, Hex Flange 5/16-18, Whiz Lock Small 32 1931277SM 4 BRACKET, Height of Cut 33 1704116ASM 1 NUT, Push for 5/8 Diameter Stud Capped 34 1960520SM 1 ARM, Lift 35 1734889ASM 1 PIN, Spring 36 2816001SM 1 WASHER, Detent 37 1704097SM 1 TRUNNION, w/Hole Cold Head 38 1733257SM 1 TRUNNION, LH Thread, Cold Head 39 1733258SM 1 CRANK, Height Adjustment 40 1719901SM 1 KNOB, Spinner 41 1714084SM 1 NUT, Push Pal, 3/8 Diameter Stud Capped 42 1960093SM 1 NUT, Hex Flange, 1/2-13 Two-Way Lock 43 1930644SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690757 - Broadmoor

2007

43

TP 400-4806-00-BM-SA

38" Mower Deck - Height Adjustment & Roller Bar Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987894

The above parts group applies to the following Mfg. Nos.:

2690757 - Broadmoor

2007

44

TP 400-4806-00-BM-SA

38" Mower Deck - Height Adjustment & Roller Bar Group

PART NO. DESCRIPTIONREF NO QTY.

SPACER, Split 46 1602946SM 3 ROLLER, Rounded 47 1722036SM 2 ROLLER 48 1668513SM 6 ROD, 1/2 Diameter 49 1734797SM 1 NUT, Hex Flange 5/16-18 ESNA 50 1960686SM 1 ROD, Height Adjustment 51 1724959SM 1 NUT, Hex Jam 5/16-18 52 1920161SM 1 TRUNNION 53 1731382SM 1 SPACER, Heat Treated, Powdered Metal 54 1716953SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690757 - Broadmoor

2007

45

TP 400-4806-00-BM-SA

38" Mower Deck - Housing, Arbors & Blades Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987895

The above parts group applies to the following Mfg. Nos.:

2690757 - Broadmoor

2007

46

TP 400-4806-00-BM-SA

38" Mower Deck - Housing, Arbors & Blades Group

PART NO. DESCRIPTIONREF NO QTY.

HOUSING ASSEMBLY, 38" Mower 1 1733127CSM 1 CAPSCREW, Hex Head 7/16-14 x 1-1/4 G8 2 2823471SM 2 WASHER, Spring 3 1656916SM 2 WASHER, Hex, 11/16 x 2 4 1713089SM 2 BLADE, 16-1/8 5 1704856SM 1 BLADE, Mower 22-1/4 6 1704101SM 1 SHIELD, Grass Lower Arbor Heat Treat 7 1713196SM 2 SHAFT, Arbor 8 1713612SM 2 WASHER, Cup Heat Treat 9 1713619SM 2 HOUSING, Arbor Bottom w/Lube Fitting 10 1713338ASM 2 BEARING, Ball 11/16 x 1-9/16 x 15/32 11 1705897SM 4 SPACER, Powdered Metal 12 1732543SM 2 HOUSING, Arbor Top 13 1713199ASM 2 HUB, Serated Metafusion 14 1713616SM 2 PULLEY 15 1732950SM 1 PULLEY 16 1732953SM 1 WASHER, Bellville 17 1713675SM 4 NUT, Hex Flange 9/16-18, Non-Locking 18 1714419SM 2 WASHER, 3/8 20 1924940SM 2 NUT, Hex Flange 5/16-18 Whiz Lock Small 21 1931277SM 2 UPSTOP 22 1733225ASM 1 GASKET, Foam 23 1707335SM 2 PLUG, Button 24 1705115SM 2 CARRIAGE BOLT, 1/4-20 x 7/8 G5 25 1931318SM 2 NUT, Push for 1/4 Diameter Thread 26 1960518SM 2 WASHER, 1/4 27 1960353SM 2 CLAMP, Wire 5/16 Diameter 28 1704873SM 1 NUT, Hex Lock ESNA Light 1/4-20 30 1920397SM 2 WASHER, 5/16 31 1919326SM 1 SPRING, Torsion Chute 32 7101082SM 1 DEFLECTOR 33 1705449SM 1 ROD, Deflector E-Coat 34 1706709SM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 1-3/4 35 2860678SM 2 SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 36 1664847SM 8

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690757 - Broadmoor

2007

47

TP 400-4806-00-BM-SA

44" Mower Deck - Belt, Idler Arm & Hitch

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986945

The above parts group applies to the following Mfg. Nos.:

2690756 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

2007

48

TP 400-4806-00-BM-SA

44" Mower Deck - Belt, Idler Arm & Hitch

PART NO. DESCRIPTIONREF NO QTY.

V-BELT, Mower Drive 1 1601672SM 1 V-BELT, Arbor Drive 2 1721532SM 1 GRIP, Lever 3 1665835 1 NUT, Hex, 3/8-16 4 1916950SM 2 WASHER, Lock, 3/8 5 1916965SM 2 BELT STOP, Idler 6 1677135ASM 1 WASHER, 3/8 7 1924940SM 14 SPACER, 25/64 x 21/32 x 7/16, Powder Metal 8 1666294SM 2 PULLEY, Idler (Includes Ref. No. 8) 9 1685150SM 2 NUT, Hex Flange, 3/8-16, MAC Lock Large, Black 10 1960339SM 1 BUSHING, 5/8 x 3/4 x 13/32, Powder Metal 11 1676148SM 4 SPRING 12 1715435SM 1 SPACER, 25/64 x 5/8 x 1-1/8, Case Hardened 13 1674669SM 2 GREASE FITTING 14 2812808SM 2 LEVER ASSEMBLY, Idler (Includes Ref. Nos. 3, 11 & 14) 15 1704658SM 1 CARRIAGE BOLT, 3/8-16 x 2 16 1960315SM 1 LEVER ASSEMBLY, Idler Arm (Includes Ref. Nos. 11 & 14) 17 1718561SM 1 WASHER, 3/8, Black 18 1924356SM 2 CARRIAGE BOLT, 3/8-16 x 1-1/2 19 1931352SM 1 SPRING 20 1656936SM 1 CAPSCREW, Hex Head, 3/8-16 x 3-1/2 21 1923938SM 1 CAPSCREW, Hex Head, 3/8-16 x 1-3/8 22 1921968SM 2 SPACER, 3/8 x 3/4 x 1/2 23 2157081SM 2 NUT, Hex Toplock Spiralock Flange, 3/8-16 24 2860681SM 2 SPRING 25 2156302SM 1 HITCH ASSEMBLY 26 1707432ASM 1 ROD, Latch 27 1715759SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690756 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

2007

49

TP 400-4806-00-BM-SA

44" Mower Deck - Height Adjustment & Roller Bar Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2987878

The above parts group applies to the following Mfg. Nos.:

2690756 - Broadmoor 2690760 - Broadmoor

2007

50

TP 400-4806-00-BM-SA

44" Mower Deck - Height Adjustment & Roller Bar Group

PART NO. DESCRIPTIONREF NO QTY.

NUT, Hex Toplock Spiral Lock Flange 3/8-16 1 2860681SM 3 SPACER, 3/8 x 3/4 x 15/16 2 1706644SM 1 WASHER, 3/8 3 1924940SM 4 CAPSCREW, Hex Head 3/8-16 x 1-3/4 G8 4 1922606SM 1 ROD, Adjustment 5 1734797SM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 1-1/4 6 1931202SM 2 INDICATOR, Height 7 1720643ASM 1 SCREW, Hex Whiz Lock Flange 5/16-18 x 3/4 8 1930591SM 2 NUT, Hex Flange 5/16-18 Whiz Lock Small 9 1931277SM 2 PIN, Spring 10 2816001SM 1 WASHER, Detent 11 1704097SM 1 TRUNNION 12 1733257SM 1 WASHER, 1/2 13 1960170SM 3 TRUNNION 14 1733258SM 1 CRANK, Height Adjust 15 1719901SM 1 KNOB, Spinner 16 1714084SM 1 NUT, Push Pal 3/8 Diameter Stud Capped 17 1960093SM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 18 1664847SM 5 BRACKET, Up-Stop 19 1722750ASM 1 STRAP, Roller 20 1665374SM 3 NUT, Hex Jam 1/2-13 21 1913744SM 2 TRUNNION, Rod 22 1704081ASM 1 PIN, Round Head Drilled 3/8 x 2 23 2118053SM 1 CLIP, Hair Pin 24 1960074SM 2 BRACKET, Height of Cut 26 1704116ASM 1 ROD,Height Adjuster 29 1724959SM 1 NUT, Hex Jam 5/16-18 30 1920161SM 1 UP-STOP, 6-14 High 32 1720659SM 1 SHAFT ASSEMBLY, Rocker 44" 34 1733521ASM 1 CARRIAGE BOLT, 3/8-16 x 1-1/2 G5 35 1931352SM 1 SHAFT & BAR ASSEMBLY, 44" 36 1716159ASM 1 BAR, Roller 37 1704074ASM 1 NUT, Hex Flange 1/2-13 Two-Way Lock 38 1930644SM 2 NUT, Hex Adjusting 39 1704082SM 1 SLIDE 40 1677507SM 1 WASHER, 1/2 41 1924361SM 1 BOLT, Shoulder, 3/8-16 G5 42 2172622SM 1 NUT, Push for 5/8 Diameter Stud Capped 43 1960520SM 2 ROLLER, Rounded 44 1722036SM 2 SPACER, Split 45 1602946SM 2 WASHER, 5/8 46 1924366SM 10 ROLLER 47 1668513SM 7

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690756 - Broadmoor 2690760 - Broadmoor

2007

51

TP 400-4806-00-BM-SA

44" Mower Deck - Height Adjustment & Roller Bar Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2987878

The above parts group applies to the following Mfg. Nos.:

2690756 - Broadmoor 2690760 - Broadmoor

2007

52

TP 400-4806-00-BM-SA

44" Mower Deck - Height Adjustment & Roller Bar Group

PART NO. DESCRIPTIONREF NO QTY.

SWIVEL, Adjustable 52 7028200SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690756 - Broadmoor 2690760 - Broadmoor

2007

53

TP 400-4806-00-BM-SA

44" Mower Deck - Housing, Arbors & Blades Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987515

The above parts group applies to the following Mfg. Nos.:

2690756 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

2007

54

TP 400-4806-00-BM-SA

44" Mower Deck - Housing, Arbors & Blades Group

PART NO. DESCRIPTIONREF NO QTY.

HOUSING ASSEMBLY, 44" 1 1687312SM 1 CAPSCREW, Hex Head 7/16-14 x 1-1/4 G8 2 2823471SM 3 WASHER, Spring 3 1656916SM 3 WASHER, Hex, 11/16 x 2 4 1713089SM 3 BLADE, Mower 5 1704100SM 3 SHIELD, Grass Lower Arbor Heat Treat 6 1713196SM 3 SHAFT, Arbor 7 1713612SM 1 SHAFT, Arbor 8 1713195SM 2 WASHER, Cup 9 1713619SM 3 HOUSING, Arbor Bottom w/Lube Fitting (Includes Ref. No. 45) 10 1713338ASM 3 BEARING, Ball 11/16 x 1-9/16 x 15/32 11 1705897SM 3 SPACER, Powdered Metal 12 1732544SM 3 BEARING, Ball 13 2108202SM 3 SPACER, 21/32 x 3/4 x 5/8 14 1715724SM 3 HOUSING, Arbor Top 15 1655729ASM 3 HUB, Powdered Metal 16 1713533SM 1 PULLEY 17 1713098SM 3 HUB, Hub Serated 18 1713158SM 1 PULLEY 19 1732951SM 1 PULLEY (CE/Export) 19 1713091SM 1 HUB, Pulley, Center & R.H. 20 1713197SM 2 WASHER, Bellville 21 1713675SM 6 NUT, Hex Flange 9/16-18 22 1714419SM 3 GASKET 23 1707335SM 3 COVER, Arbor 24 1720560ASM 1 COVER, Arbor (No Ribs) (CE/Export) 24 1732200ASM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 25 1664847SM 27 CARRIAGE BOLT, 1/4-20 x 1-1/2 G5 26 1960633SM 2 NUT, Push for 1/4 Diameter Thread 27 1960518SM 2 ROD, Deflector 28 1706709SM 1 SPACER 29 1710703SM 2 CARRIAGE BOLT, 1/4-20 x 1-1/4 G5 30 1931320SM 2 NUT, Hex Lock ESNA Light 1/4-20 31 1920397SM 2 CLAMP, Wire, 5/16 Diameter 32 1704873SM 1 WASHER, 5/16 33 1919326SM 1 SPRING, Torsion Chute 34 7101082SM 1 DEFLECTOR 35 1705449SM 1 COVER, Arbor 36 1715673SM 1 NUT, Hex Flange 5/16-18 Whiz Lock Small 37 1931277SM 1 PLUG, Button 38 1705115SM 1 BAFFLE, Blowout 44" LH (CE/Export) 39 1716879ASM 1 BAFFLE, Blowout 44" RH (CE/Export) 40 1716878ASM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690756 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

2007

55

TP 400-4806-00-BM-SA

44" Mower Deck - Housing, Arbors & Blades Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987515

The above parts group applies to the following Mfg. Nos.:

2690756 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

2007

56

TP 400-4806-00-BM-SA

44" Mower Deck - Housing, Arbors & Blades Group

PART NO. DESCRIPTIONREF NO QTY.

BAFFLE, Short Blowout 43 1724538ASM 1 CARRIAGE BOLT, 1/4-20 x 1-1/2 44 1960633SM 1 FITTING, Grease 1/4 Drive 45 1704314SM 3

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690756 - Broadmoor 2690758 - 1620HP 2690760 - Broadmoor

2007

57

TP 400-4806-00-BM-SA

50" Mower Deck - Clutch & Support

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

984271C

The above parts group applies to the following Mfg. Nos.:

2690755 - Broadmoor

2007

58

TP 400-4806-00-BM-SA

50" Mower Deck - Clutch & Support

PART NO. DESCRIPTIONREF NO QTY.

V-BELT, Mower Drive 1 1707740SM 1 V-BELT, Arbor Drive 2 1703836SM 1 GRIP, Lever 3 1665835 1 NUT, Hex, 3/8-16 4 1916950SM 2 WASHER, Lock, 3/8 5 1916965SM 2 BELT STOP, Idler 6 1677135ASM 1 WASHER, 3/8 7 1924940SM 14 HUB, 25/64 x 3/4 x 63/64, Powder Metal 8 1716553SM 1 PULLEY, Idler (Includes Ref. No. 8) 9 1685150SM 2 NUT, Hex Flange, 3/8-16, MAC Lock Large, Black 10 1960339SM 1 BUSHING, 5/8 x 3/4 x 13/32, Powder Metal 11 1676148SM 4 SPRING 12 1715435SM 1 SPACER, 25/64 x 5/8 x 1-1/8, Case Hardened 13 1674669SM 2 GREASE FITTING 14 2812808SM 2 LEVER ASSEMBLY, Idler (Includes Ref. Nos. 11 & 14) 15 1704658SM 1 CARRIAGE BOLT, 3/8-16 x 2 16 1960315SM 1 LEVER ASSEMBLY, Idler Arm (Includes Ref. Nos. 11 & 14) 17 1718561SM 1 WASHER, 3/8, Black 18 1924356SM 2 CARRIAGE BOLT, 3/8-16 x 1-1/2 19 1931352SM 1 SPRING 20 1656936SM 1 CAPSCREW, Hex Head, 3/8-16 x 3-1/2 21 1923938SM 1 CAPSCREW, Hex Head, 3/8-16 x 1-3/8 22 1921968SM 2 SPACER, 3/8 x 3/4 x 1/2 23 2157081SM 2 NUT, Hex Aluminum Insert Lock, 3/8-16 24 2860681SM 2 SPRING 25 2156302SM 1 HITCH ASSEMBLY 26 1707432ASM 1 ROD, Latch 27 1715759SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690755 - Broadmoor

2007

59

TP 400-4806-00-BM-SA

50" Mower Deck - Height Adjustment & Roller Bar Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987883

The above parts group applies to the following Mfg. Nos.:

2690755 - Broadmoor

2007

60

TP 400-4806-00-BM-SA

50" Mower Deck - Height Adjustment & Roller Bar Group

PART NO. DESCRIPTIONREF NO QTY.

BAR, Roller 5/16 1 1704074ASM 1 ROD, Adjusting 2 1722995SM 1 CARRIAGE BOLT, 3/8-16 x 1-1/2 G5 3 1931352SM 1 BOLT, Shoulder, 3/8-16 G5 4 2172622SM 1 BRACKET, Height of Cut 16GA 5 1704116ASM 1 CAPSCREW, Hex Head 3/8-16 x 1-3/4 G8 6 1922606SM 1 WASHER, 5/8 7 1924366SM 8 CHAIN, Link 8 1731383ASM 2 CRANK, Height Adjusting 9 1719901SM 1 INDICATOR, Height 10 1720643ASM 1 KNOB, Spinner 11 1714084SM 1 SHAFT ASSEMBLY, Rocker 50" 13 1733522ASM 1 NUT, Hex Flange 1/2-13 Two-Way Lock 14 1930644SM 2 NUT, Hex Flange 5/16-18 Whiz Lock Small 15 1931277SM 2 NUT, Hex 5/8-11 16 1915726SM 2 NUT, Hex Jam 5/16-18 17 1920161SM 2 NUT, Hex Adjusting 18 1704082SM 1 PIN, Round Head Drilled 3/8 x 2 19 2118053SM 1 SCREW, Hex Whiz Lock Flange 5/16-18 x 3/4 20 1930591SM 2 NUT, Push Pal 3/8 Diameter Stud Capped 22 1960093SM 1 NUT, Push for 5/8 Diameter Stud Capped 23 1960520SM 2 SHAFT & BAR ASSEMBLY, Roller 24 1716155ASM 1 ROD, Height Adjust (Long) 25 1731384SM 2 ROD, Height Adjust (Short) 25 1724959SM 2 TRUNNION 26 1731382SM 2 PIN, Spring 27 2816001SM 1 ROLLER 28 1668513SM 8 ROLLER, Rounded 29 1722036SM 2 SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 30 1664847SM 6 NUT, Hex Toplock Spiral lock Flange 3/8-16 31 2860681SM 3 SLIDE 32 1677507SM 1 SPACER, 3/8 x 3/4 x 15/16 33 1706644SM 1 SPACER 34 1709195SM 3 STRAP, Roller 35 1665374SM 3 CLIP, Hair Pin 36 1960074SM 3 TRUNNION 37 1733257SM 1 TRUNNION 38 1706645ASM 1 TRUNNION 39 1733258SM 1 WASHER, 3/8 40 1924940SM 3 WASHER, Detent 41 1704097SM 1 WASHER, 1/2 42 1924361SM 1 WASHER, 1/2 43 1960170SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690755 - Broadmoor

2007

61

TP 400-4806-00-BM-SA

50" Mower Deck - Housing, Arbors & Blades Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987519

The above parts group applies to the following Mfg. Nos.:

2690755 - Broadmoor

2007

62

TP 400-4806-00-BM-SA

50" Mower Deck - Housing, Arbors & Blades Group

PART NO. DESCRIPTIONREF NO QTY.

HOUSING ASSEMBLY, 50" (Orange) 1 1687325SM 1 HOUSING ASSEMBLY, 50" (Red) 1 1687326SM 1 CAPSCREW, Hex Head 7/16-14 x 1-1/4 G8 2 2823471SM 3 WASHER, Spring 3 1656916SM 3 WASHER, Hex, 11/16 x 2 4 1713089SM 3 BLADE, Mower 50" 5 1708229ASM 3 SHIELD, Grass Lower Arbor Heat Treat 6 1713196SM 3 SHAFT, Arbor 7 1713612SM 1 SHAFT, Arbor 8 1713195SM 2 WASHER, Cup 9 1713619SM 3 HOUSING, Arbor Bottom w/Lube Fitting (Includes Ref. No. 48) 10 1713338ASM 3 BEARING, Ball, 11/16 x 1-9/16 x 15/32 11 1705897SM 3 SPACER, Powdered Metal 12 1732544SM 3 BEARING, Ball 13 2108202SM 3 SPACER, 21/32 x 3/4 x 5/8 14 1715724SM 3 HOUSING, Arbor Top 15 1655729ASM 3 HUB, Powdered Metal 16 1713533SM 1 PULLEY 17 1713098SM 3 HUB, Serated Powdered Metal 18 1713158SM 1 PULLEY 19 1732951SM 1 HUB, Pulley, Center & R.H. 20 1713197SM 2 WASHER, Bellville 21 1713675SM 6 NUT, Hex Flange 9/16-18 22 1714419SM 3 GASKET, Foam Poly 23 1707335SM 3 COVER, Arbor 24 1720560ASM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 25 1664847SM 27 CARRIAGE BOLT, 1/4-20 x 1-1/4 G5 26 1931320SM 2 NUT, Push for 1/4 Diameter Thread 27 1960518SM 2 ROD, Deflector E-Coat 28 1706709SM 1 WASHER 29 1960353SM 1 SPACER, Powdered Metal 30 1710703SM 2 NUT, Hex Lock ESNA Light 1/4-20 31 1920397SM 2 CLAMP, Wire 32 1704873SM 1 WASHER, 5/16 33 1919326SM 1 SPRING, Torsion Chute 34 7101082SM 1 DEFLECTOR 35 1705449SM 1 COVER, Arbor 36 1715673SM 1 CAP 37 1723323SM 1 PLUG, Button 38 1705115SM 1 BAFFLE, Blowout 50" L.H. (CE/Export) 39 1716870ASM 1 BAFFLE, Blowout 50" R.H. (CE/Export) 40 1735184ASM 1 NUT, Hex Flange 5/16-18 Whiz Lock Large 41 1927557SM 2/11

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690755 - Broadmoor

2007

63

TP 400-4806-00-BM-SA

50" Mower Deck - Housing, Arbors & Blades Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987519

The above parts group applies to the following Mfg. Nos.:

2690755 - Broadmoor

2007

64

TP 400-4806-00-BM-SA

50" Mower Deck - Housing, Arbors & Blades Group

PART NO. DESCRIPTIONREF NO QTY.

UPSTOP (Only used on Broadmoor Series) 44 1704098SM 1 SPACER (Only used on Broadmoor Series) 45 1611705SM 2 SCREW, Hex Washer Taptite (Only used on Broadmoor Series) 46 1931202SM 2 CARRIAGE BOLT, 1/4-20 x 1-1/2 G5 47 1960633SM 2 FITTING, Grease, 1/4 Drive 48 1704314SM 3

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690755 - Broadmoor

2007

65

TP 400-4806-00-BM-SA

Hex Head Capscrew

Hex Nut

Lockwasher

Washer

Carriage Bolt

Hardware Identification & Torque Specifications

Screw, 1/2 x 2

Body

Diameter

Body

Length

Inside Diameter

Nut, 1/2”

No

Marks

3/8” Bolt or Nut

Wrench—9/16”

3/8

5/16” Bolt or Nut

Wrench—1/2”

5/16

1/4” Bolt or Nut

Wrench—7/16”

1/4

1/2” Bolt or Nut

Wrench—3/4”

1/2

DIA.

7/16 DIA.

7/16” Bolt or Nut

Wrench (Bolt)—5/8”

Wrench (Nut)—11/16”

Wrench & Fastener Size Guide

0

1/4 3/4

1/2

1

1/4 3/4

1/2

2

1/4 3/4

1/2

3

1/4 3/4

1/2

4

Common Hardware Types

Torque Specification Chart

FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

Hardware Grade

Size Of

Standard Hardware Sizing

When a washer or nut is identified as 1/2”, this is the

Nominal size

second number is present it represent the When bolt or capscrew is identified as 1/2 - 16 x 2”, this

means the second number represents the example, and the final number is the bolt or screw (in this example 2 inches long).

, meaning the

Nominal size

inside diameter

, or

body diameter

threads per inch

is 1/2 inch; if a

threads per inch

is 1/2 inch; the

body length

(16 in this

of the

The guides and ruler furnished below are designed to help you select the appropriate hardware and tools.

Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 27 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 420 571.2 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0

1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:

a. for prevailing torque locknuts - use 65% of grade 5 b. for flange whizlock nuts and screws - use 135% of

3. Unless otherwise noted on assembly drawings, all torque values must meet this specification.

SAE Grade 2 SAE Grade 5 SAE Grade 8

in/lbs in/lbs

19

2.1

20

2.3

27

3.1

31

3.5

66

7.6 8 10.9 12 16.3

76

8.6 10 13.6 14 19.0

torques. grade 5 torques.

30 31 43 49

NOTES

in/lbs

3.4

3.5

4.9

5.5

41 43 60 68

4.6

4.9

6.8

7.7

MANUFACTURING, INC.

500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA

www.simplicitymfg.com

Briggs and Stratton Yard Power Products Group

Simplicity 1600 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual