Simplex TrueAlert 49SOC-CRFIRE, TrueAlert 49SOC-CW, TrueAlert 49SOC-CR, TrueAlert 49SOC-CRS, TrueAlert 49SOC-CWS Instructions Manual

TrueAlert Addressable Notification Appliances

UL, ULC Listed* Ceiling Mount Addressable Speaker
(S/O) Notification Appliances

Ceiling mount Addressable Speaker (S/O)
Notification Appliances are individually powered,

addressed, and controlled from a Simplex fire alarm
control panel IDNAC Signaling Line Circuit (SLC). S/O
notification appliances use a multi-tapped speaker for
audio/tone notification.

Speakers are wired separately allowing for convenient
installation to standard electrical boxes with extensions
Wiring supervision is electronically monitored and allows
audio wiring to be T-tapped for class B wiring, reducing
wiring costs and wiring distances.

Ceiling mount S/O appliances are available in a
400 - 4000 Hz model and high fidelity model capable of
operating between 200 - 10000 Hz.

Separate appliance and cover selection greatly simplifies
the ordering and installation process.

For more detailed information, please consult datasheet
S49SWC-0001.

Ceiling Mount Addressable Speaker

Product Selection

Ceiling Mount S/O Appliances

TrueAlert ES Addressable Ceiling Mount S/O appliance dimensions with cover:7 ⅛” H x 7 ⅛” W x 1 ¼” D ( 180 mm x 180 mm x 32 mm)

Model* Description

49SO-APPLC(-BA) S/O Appliance only. Select cover separately.

High Fidelity Ceiling Mount S/O Appliances

Model* Description

49HF-APPLC(-BA) High fidelity ceiling mount S/O appliance only. Select cover separately.

S/O Ceiling Mount Covers (Required when ordering APPLC models)

Model Color Wording Model Color Wording

49SOC-CK Black
49SOC-CR Red 49SOC-CRS Red
49SOC-CW
49SOC-CWALT ALERT 49SOC-CRALT Red Alert
49SOC-CWFIRE White FIRE

* Note: (-BA) indicates model is available either with or without the -BA suffix. Model numbers ending in –BA are assembled in the USA

IDNAC SLC Controller Compatibility Reference

White

No logo or label

49SOC-CRFIRE Red FIRE

49SOC-CWS White

Notification Appliance

Simplex

Compatible Controllers

4100ES with EPS+ or EPS Power Supply S4100-0100
4009 IDNAC Repeater S4009-0004
4100ES Flex 50 Amplifiers
4100ES Constant Supervision and Signal

Cards

* Additional listings may be applicable. Listings and approvals under Simplex Time Recorder Co. are the property of Tyco Fire Protection Products.

S49SOC-0001-1 11/2015

Data Sheet

Reference

S4100-0034

Controller Output

IDNAC SLC

IDNAC SLC Output

Voltage

29 VDC

(regulated)

Appliance Voltage

Design Reference

23 VDC

(with 6 VDC drop)

Ceiling Mount Speaker Specifications

Specifications (see page 1 for appliance dimensions)

Environmental 32° to 120° F (0° to 49° C); 10% to 93%, non-condensing at 104° F (40° C)

Connections

IDNAC SLC Loading Maximum of 127 addresses per SLC, 139 unit loads. See device and compatible fire panel

Installation Instructions 579-1203

Terminal blocks for 18 AWG to 12 AWG (0.82 mm2 to 3.31 mm2); two wires per terminal
for in/out wiring. Use Unshielded Twisted Pair (UTP) for IDNAC and audio wiring.

installation instructions for circuit current load limits.

Speaker General Specifications

Input Voltage 25 or 70.7 Vrms
Power Taps ¼, ½, 1, and 2 W
Frequency Response 400 to 4000 Hz (S/O), 200 to 10000 Hz (H/F) General Signaling = 125 to 12 kHz

Speaker Output Ratings 25 or 70.7 Vrms @ 10 ft (3 m)

Wattage Tap ¼ W ½ W 1 W 2 W

Model S/O H/F S/O H/F S/O H/F S/O H/F

Reverberant Chamber Test, per UL 1480 (dBA) 79 77 83 81 86 84 90 87

Anechoic Chamber Test, per ULC-S541 (dBA)* 81 78 85 82 88 85 91 88

* Note: Select taps as indicated to satisfy the ULC fire alarm applications requirement of 85 dBA minimum

Polar Dispersion Reference (per ULC-S541 Anechoic Chamber
Testing)

Attenuation Angle Attenuation Angle

-3 dB 70° -6 dB 80°

Appliance Specifications

Typical Operating Voltage Range

Current consumption @ 23 VDC on IDNAC Addressable SLC

Supervisory Requirements

Note: Speakers are for connection to compatible fire alarm audio circuits. Anechoic speaker output ratings are typically more representative

of actual installed sound output.

Ceiling Mount Speaker Installation Reference

23 VDC to 30 VDC, Special Application

9mA

1 unit load (= 0.8 mA control panel current)

TYCO, SIMPLEX, and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited. NFPA 72 and National Fire Alarm and
Signaling Code are registered trademarks of the National Fire Protection Association (NFPA).

Tyco Fire Protection Products • Westminster, MA • 01441-0001 • USA S49SOC-0001-1 11/2015

www.simplex-fire.com

© 2015 Tyco Fire Protection Products. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice.