8 Hilfe und weitere Informationen................................................................................................9
DE
3 / 60
1. Bestimmungsgemäßer Gebrauch
1 Bestimmungsgemäßer Gebrauch
Der USB-Programmierstick ist ein kompaktes Programmiergerät,
welches zur Programmierung von aktiven SimonsVoss
Schließkomponenten
einen Computer mit Windows-Betriebssystem dient.
CD.STARTER.G2
Für die Programmierung von Schließkomponenten aus dem System
3060 über die LSM STARTER.
MK.CD.STARTER.G2
Für die Programmierung von MobileKey-Schließkomponenten über
die Web-Applikation. Der USB-Programmierstick kann außerdem an
Android-Geräten (mit OTG-Funktion) betrieben werden.
2 Sicherheitshinweise
WARNUNG
Durch fehlerhaft installierte oder programmierte Schließungen kann der
Zugang durch die Tür versperrt werden. Für die Folgen fehlerhafter Installation, wie nicht möglicher Zugang zu verletzten Personen, Sachschäden oder anderen Schäden, haftet die SimonsVoss Technologies
GmbH nicht.
(MK.)CD.STARTER
(z.B. Transponder oder Schließzylinder)
über
4 / 60
DE
(MK.)CD.STARTER3. Lieferumfang
HINWEIS
Direkte Sonneneinstrahlung vermeiden.
HINWEIS
Von magnetischen Störquellen fernhalten.
3 Lieferumfang
CDStarter Programmiergerät
Kurzanleitung
4 Inbetriebnahme
Der Treiber wird ab der Version 3.3 der LSM-Software automatisch
installiert. Alternativ ist der Treiber auf der SimonsVoss-Homepage
(www.simons-voss.com) im Supportbereich unter Infomaterial/
Software-Downloads zu finden. Nach der Installation des Treibers ist
das Programmiergerät einsetzbar.
DE
5 / 60
(MK.)CD.STARTER5. Programmierung
5 Programmierung
Beachten Sie unbedingt das Systemhandbuch Ihres Systems:
LSM Starter: www.simons-voss.com im Supportbereich unter
Infomaterial/Dokumente.
MobileKey: www.my-mobilekey.com im Infocenter unter
Dokumente.
5.1 Programmierung über LSM STARTER
Auf dem Rechner muss eine aktuelle Version der LSM Starter installiert
sein. Schließen Sie den Programmierstick an. Platzieren Sie die zu
programmierenden Komponenten in einem Abstand von 10-30cm zum
Programmiergerät und führen Sie die Programmierroutinen durch.
Sollten Sie eine Fehlermeldung bekommen, dass keine Hardware
gefunden wurde, prüfen Sie zuerst ob der Programmierstick
ordnungsgemäß angeschlossen ist und dann in der Software unter
„Programmierung / Config Device testen“ ob der CDStarter erkannt
wird. Bei einer weiteren Fehlermeldung ziehen Sie das
Programmiergerät aus der USB Buchse und stecken Sie es erneut ein.
Bei dieser Aktion wird der Treiber neu geladen.
6 / 60
DE
(MK.)CD.STARTER6. Technische Daten
5.2 Programmierung über MobileKey
Melden Sie sich an der Web-App an und wählen Sie
Programmieren"
muss die Programmier-App installiert werden. Die Setupdatei wird über
einen Link zum Download angeboten.
Sofern die Programmier-App bereits installiert ist, können Sie diese
direkt über die Schaltfläche
Programmieren beginnen.
. Für die Programmierung über die Web-Applikation
"APP STARTEN"
"Menü/
starten und mit dem
5.3 Programmierdistanzen
Der Abstand zwischen dem USB-Programmierstick und aktiver
Komponente (z.B. Schließzylinder oder Transponder) sollte ca. 20
cm betragen.
Achten Sie darauf, dass sich keine anderen aktiven Komponenten
während des Programmier- oder Auslesevorgangs in unmittelbarer
Nähe (Radius ca. 1,5 m zum USB-Programmierstick) befinden.
6 Technische Daten
Programmierung:SimonsVoss Aktiv-Technologie 25kHz
LSM Version:LSM Starter ab LSM 3.2 SP1
Betriebssystem:Ab Windows XP SP3
USB Schnittstelle:USB Typ A, USB 2.0
Abmessungen:LxBxH 57(70)x19x13 mm
DE
7 / 60
Reichweite:10 cm - 30 cm
Stromversorgung:Via USB Stecker, keine interne Batterie
Schutzart:IP40
Temperaturbereich:-10 bis +60°C
Luftfeuchte:95% (nicht kondensierend)
Funkemissionen
SRD15,25 kHz - 72,03 kHz
Es liegen keine geografischen Beschränkungen innerhalb der EU vor.
10 dBµA/m (3 m Entfernung)
7 Konformitätserklärung
Hiermit erklärt die SimonsVoss Technologies GmbH , dass der Artikel
CD.STARTER folgenden Richtlinien entspricht:
2014/53/EU "Funkanlagen"
2014/30/EU "EMV"
2011/65/EU "RoHS"
2012/19/EU "WEEE"
sowie der Verordnung (EG) 1907/2006 "REACH"
(MK.)CD.STARTER7. Konformitätserklärung
8 / 60
DE
(MK.)CD.STARTER
Der vollständige Text der EU-Konformitätserklärung ist unter der
folgenden Internetadresse verfügbar:
de/zertifikate.html
8 Hilfe und weitere Informationen
Infomaterial/
Dokumente
Software und
Treiber
Konformitätserklärungen
und Zertifikate
Informationen
zur Entsorgung
Detaillierte Informationen zum Betrieb und zur Konfiguration sowie
weitere Dokumente finden Sie auf der SimonsVoss-Homepage im
Downloadbereich unter Dokumente (
de/downloads/dokumente.html
Software und Treiber finden Sie auf der SimonsVoss-Homepage im
Downloadbereich unter Software-Downloads (
voss.com/de/downloads/software-downloads.html
Konformitätserklärungen und Zertifikate zu diesem Produkt finden Sie
auf der SimonsVoss-Homepage im Zertifikatsbereich (
www.simons-voss.com/de/zertifikate.html
Entsorgen Sie das Gerät (CD.STARTER) nicht mit dem Hausmüll,
Recyceln Sie defekte oder verbrauchte Batterien gemäß der
8. Hilfe und weitere Informationen
https://www.simons-voss.com/
.
https://www.simons-voss.com/
).
https://www.simons-
).
https://
).
sondern gemäß der europäischen Richtlinie 2012/19/EU bei einer
kommunalen Sammelstelle für Elektro-Sonderabfälle.
europäischen Richtlinie 2006/66/EG.
DE
9 / 60
8. Hilfe und weitere Informationen
Beachten Sie örtliche Bestimmungen zur getrennten Entsorgung von
Batterien.
Führen Sie die Verpackung einer umweltgerechten
Wiederverwertung zu.
(MK.)CD.STARTER
Hotline
E-Mail
FAQ
10 / 60
Bei technischen Fragen hilft Ihnen die SimonsVoss Service-Hotline
unter +49 (0) 89 99 228 333 (Anruf in das deutsche Festnetz, Kosten
variieren je nach Anbieter).
Sie möchten uns lieber eine E-Mail schreiben?
support@simons-voss.com
Informationen und Hilfestellungen zu SimonsVoss-Produkten finden Sie
auf der SimonsVoss-Homepage im FAQ-Bereich (
voss.com/otrs/public.pl
SimonsVoss Technologies GmbH
Feringastraße 4
85774 Unterföhring
Deutschland
7 Declaration of conformity.......................................................................................................... 16
8 Help and other information........................................................................................................ 17
EN
11 / 60
(MK.)CD.STARTER1. Intended use
1 Intended use
The USB config device is a compact programming device which is used
to programme active SimonsVoss components
locking cylinders
CD.STARTER.G2
Used to programme System 3060 locking components with LSM
STARTER.
MK.CD.STARTER.G2
Used to programme MobileKey locking components with the web
application. The USB config device can also be operated on Android
devices (with an OTG function).
using a Windows-based computer.
such as transponders or
2 Safety instructions
WARNING
Access through a door may be blocked due to incorrectly installed or incorrectly programmed locking devices. SimonsVoss Technologies
GmbH is not liable for consequences of incorrect installation, such as
blocked access to injured persons, physical damage or any other losses.
12 / 60
EN
(MK.)CD.STARTER3. Included in supplied package
IMPORTANT
Avoid placing in direct sunlight.
IMPORTANT
Keep away from sources of magnetic interference.
3 Included in supplied package
CD.Starter programming device
USB cable connector A / socket A
Quick guide
4 Initial operation
The driver is automatically installed in LSM software Version 3.3 and
higher. You can also find the driver under Informative material/Software
downloads in the Support section on the SimonsVoss website
(www.simons-voss.com). Once the driver is installed, the programming
device is ready for use.
EN
13 / 60
(MK.)CD.STARTER5. Programming
5 Programming
Please observe the system manual for your system:
LSM Starter: www.simons-voss.com under Informative material/
Documents in the Support section.
MobileKey: www.my-mobilekey.com under Documents in the
Infocenter
5.1 Programming with LSM STARTER
The current version of LSM 3.2 or higher must be installed on your
computer. Connect the USB config device. Place the components to be
programmed at a distance of 10-30 cm from the programming device
and implement the programming routines.
If you should receive an error message stating that no hardware has
been found, first check that the USB config device is connected properly
and then verify whether the CDStarter has been detected under
'Programming / Config device' in the software. If there is still an error
message, remove the programming device from the USB socket and
plug it in again. The driver will then be reloaded.
5.2 Programming with MobileKey
Log on to the web application and select
programming app must be installed to programme with the web
application. The set-up file is provided for download via a link.
"Menu/Programme"
. The
14 / 60
EN
(MK.)CD.STARTER6. Technical specifications
If the programming app is already installed, you can launch it directly
using the
"START APP"
button and then begin programming.
5.3 Programming distance
The distance between the USB config device and active
components, such as locking cylinders or transponders, should be
about 20cm.
Ensure that no other active components are in the immediate
surrounding area during the programming or read process (radius of
about 1.5m around the USB config device).
6 Technical specifications
Programming:SimonsVoss Active Technology, 25kHz
LSM version:LSM Starter LSM 3.2 SP1 or higher
Operating system:Windows XP SP3 or higher
USB port:USB type A, USB 2.0
Dimensions:LxWxH 57(70)x19x13 mm
Read range:10-30cm
Power supply:via USB connector, no internal battery
Standard protection rating IP40
Temperature range:-10 to +60°C
Humidity:95% (non-condensing)
EN
15 / 60
(MK.)CD.STARTER7. Declaration of conformity
Radio emissions
SRD15.25 kHz - 72.03 kHz10 dBµA/m (3 m distance)
There are no geographical restrictions within the EU.
7 Declaration of conformity
The company SimonsVoss Technologies GmbH hereby declares that
article CD.STARTER complies with the following guidelines:
2014/53/EU "Radio equipment"
2014/30/EU "EMC"
2011/65/EU "RoHS"
2012/19/EU "WEEE"
and regulation (EG) 1907/2006 "REACH"
The full text of the EU Declaration of conformity is available at the
following internet address:
certificates.html
.
https://www.simons-voss.com/en/
16 / 60
EN
(MK.)CD.STARTER8. Help and other information
8 Help and other information
Information
material/documents
Software and
drivers
Declarations
of conformity
Information
on disposal
You will find detailed information on operation and configuration and
other documents under Informative material/Documents in the
Download section on the SimonsVoss website (
voss.com/en/downloads/documents.html
You will find software and drivers in the Download section on the
SimonsVoss website (
software-downloads.html
You will find declarations of conformity for this product in the
Certificate section on the SimonsVoss website (
voss.com/en/certificates.html
Do not dispose the device (CD.STARTER) in the household waste.
Dispose of it at a collection point for electronic waste as per
European Directive 2012/19/EU.
Recycle defective or used batteries in line with European Directive
2006/66/EC.
Observe local regulations on separate disposal of batteries.
Take the packaging to an environmentally responsible recycling
point.
https://www.simons-voss.com/en/downloads/
).
).
https://www.simons-
).
https://www.simons-
EN
17 / 60
(MK.)CD.STARTER8. Help and other information
Hotline
Email
FAQs
18 / 60
If you have any questions, the SimonsVoss Service Hotline will be happy
to help you on +49 (0)89 99 228 333 (German fixed network; call
charges vary depending on the operator).
You may prefer to send us an email.
support@simons-voss.com
You will find information and help for SimonsVoss products in the FAQ