Simfer S 1250 WTB, S 1850 WTB, S 2550 WTB, S 1260 WTB, S 1860 WTB User Manual

GB

Dear Customer,

Thank you for the confidence you placed in products. Our goal is to ensure
that you use this product, which has been manufactured in our modern
facilities in precise working conditions, conforming to total quality idea and
without harming nature.

We recommend that you read and carefully store the User Manual before
you use your heater, so that it can preserve its features for a long time and
serve you most efficiently.

NOTE:

This User Manual is prepared for more than one model. Some of the features
stated in the manual may not be found in your device. These features are
denoted with *

Our products are for domestical use, not for commercial use.

"READ THE INSTRUCTIONS BEFORE DEPLOYING OR USING THIS
DEVICE.”

"It complies with EEE Regulation."

Contents

2

Safety Instructions

This device is manufactured in compliance with safety

regulations. Usage against the roles causes harm to person and

device.

Please read the User Manual carefully before operating the
device. You will find important information inside the User
Manual regarding mounting, safety, usage and maintenance.
Thus you will both protect yourself and prevent the device from
coming to harm.

If the power cord is damaged, it must be replaced by the
manufacturer or its service agency or a personnel qualified in
the same degree to prevent a dangerous situation. It must be
checked whether there are breaks or deformations on the
heating element present on the device. If glass panels are
damaged, the heater must not be used. Authorized service
must be called.

It must be ensured that the main power is 220-240V AC,
50/60 Hz and the power line is connected to the fuse. Mains
safety must be checked. Fuse must be 16 Amperes. Your
device must be used with grounded socket and grounded
socket must be outside the heater area and the hot surface.
Also, it must be checked whether the socket is loose or
damaged. Because loose sockets damage the device and the
power main.

Your device must not be used connected to the same power
cable or fuse with another device.

Power cord must not be left on the hot body of the device or
near it.

If your device will not be used for a long period of time, if
cleaning or maintenance will be conducted, the device must be
unplugged. It must be ensured that the device has cooled
down.

3

Safety Instructions

Bathroom, near the swimming around havuzu.. should not be used.

4