Simfer H45D13B055 User Manual [ru]

■ ■ ■

Electric built-in cooktop

Варочная поверхность электрическая встраиваемая

User manual

Руководство по эксплуатации

■ ■ ■

Dear User,

Our objective is to make this product provide you with the best output which is manufactured in our modern facilities in a careful working environment, in compliance with total quality concept.

Therefore, we suggest you to read the user manual carefully before using the product and, keep it permanently at your disposal.

Note: This user manual is prepared for more than one model. Some of

the features specied in the Manual may not be available in your appliance.

All our appliances are only for domestic use, not for commercial use.

Products marked with (*) are optional.

“Conforms with the WEEE Regulations.”

Contens

Important warnings Methods for protecting ceramic glass cooking surface 10 Electrical connection Introduction of the appliance Technical features 14 Installation of cooktop 15 Counter cutting sizes 18 Control panel Usage of your cooktop Maintenance and cleaning 21 Troubles and solution proposals 22 Handling rules 22 Environmentally-friendly disposal Package information

12 13

19 20

23 23

IMPORTANT WARNINGS

1. Installation and repair should always be performed

by “AUTHORIZED SERVICE”. Manufacturer shall not be held responsible for operations performed by unauthorized persons.

2. Please read this operating instructions carefully.

Only by this way you can use the appliance safely and in a correct manner.

3. The cooker should be used according to operating

instructions.

4. Keep children below the age of 8 and pets away

when operating.

5. WARNING: Fire hazard; do not store the materials on

the cooking surface.

6. WARNING: The appliance and its accessible parts are

hot during operation.

7. Setting conditions of this device are specied on

the label. (Or on the data plate)

8. The accessible parts may be hot when the grill is

used. Small children should be kept away.

9. WARNING: This appliance is intended for cooking. It

should not be used for other purposes like heating a room.

10. To clean the appliance, do not use steam cleaners.

11. NEVER try to put out the re with water. Only shut

down the device circuit and then cover the ame with a cover or a re blanket.

12. Children under 8 years of age should be kept away,

if they cannot be monitored continuously.

13. Touching the heating elements should be avoided.

14. CAUTION: Cooking process shall be supervised.

Cooking process shall always be supervised.

15. The appliance is not suitable for use with an external

timer or a separate remote control system.

16. This device can be used by children over 8 years of

age, people with physical, hearing or mental challenges or people with lack of experience or knowledge; as long as control is ensured or information is provided regarding the dangers.

17. This device has been designed for household use

only.

18. Children must not play with the appliance. Cleaning

or user maintenance of the appliance shall not be performed by children unless they are older than 8 years and supervised by adults.

19. Keep the appliance and its power cord away from

children less than 8 years old.

20. Put curtains, tulles, paper or any flammable

(ignitable) material away from the appliance before starting to use the appliance. Do not put ignitable or

ammable materials on or in the appliance.

21. Keep the ventilation channels open.

22. Do not heat closed cans and glass jars. The pressure

may lead jars to explode.

23. Do not use the product in states like medicated

and/or under inuence of alcohol which may affect your

ability of judgement.

24. After each use, check if the unit is turned off.

25. Be careful when using alcohol in your foods. Alcohol

will evaporate at high temperatures and may catch re to cause a re if it comes in contact with hot surfaces.

26. If the appliance is faulty or has a visible damage,

do not operate the appliance.

27. Do not put objects that children may reach on the

appliance.

28. The packaging materials are dangerous for children.

Keep packaging materials away from the reach of children.

29. Cooker supply can be disconnected during any

construction work at home. After completing the work, re-connecting the cooker shall be done by authorized service.

30. Do not place metal utensils such as knife, fork,

spoon on the surface of the appliance, since they will get hot.

31. To prevent overheating, the appliance should not

be installed behind of a decorative cover.

32. Turn off the appliance before removing the

safeguards. After cleaning, install the safeguards according to instructions.

33. Cable xing point shall be protected.

34. CAUTION: If the glass of the stove is broken, turn off any heating element immediately and disconnect the appliance from power source, do not touch the surface of the appliance and do not use the appliance.

35. User should not handle the cooker by himself.

36. When not turning of the cooker during cooking,

user can touch hot surfaces causing burns.

37. If heavier loads are places on the cooker, these loads can trip over. It may cause personal injuries.

38. Allow disconnection of the appliance after

installation, by accessible plug or a switch in the xed

wiring, unless.

Electrical Safety

1. Plug the appliance in a grounded socket protected by

a fuse conforming to the values specied in the technical specications chart.

2. Have an authorized electrician set grounding equipment. Our company shall not be responsible for the damages that shall be incurred due to using the product without grounding according to local regulations.

3. WARNING: If the surface is cracked, turn off the appliance to avoid risk of electric shock.

4. Never wash the appliance by spraying or pouring

water on it. There is a risk of electrocution.

5. Do not touch the plug with wet hands. Do not pull the cord to plug off, always hold the plug.

6. Unplug the unit during installation, maintenance, cleaning and repair.

7. Make sure the plug is inserted rmly into wall socket

to avoid sparks.

8. If the power supply cord (the cord with plug) is damaged, this cord shall be replaced by the manufacturer

or its service agent or an equally qualied personnel to

prevent a hazardous situation.

9. Do not use cut or damaged cords or extension cords

other than the original cord.

10. Do not use steam cleaners for cleaning the appliance, otherwise electric shock may occur.

11. Make sure there is no liquid or humidity in the

outlet where the product plug is installed.

12. An omnipolar switch capable to disconnect power supply is required for installation. Disconnection from power supply shall be provided with a switch or an

integrated fuse installed on xed power supply according

to building code.

13. The power supply cord (the cord with plug) shall not contact the hot parts of the appliance.

14. Unplug the unit during installation, maintenance, cleaning and repair.

15. Appliance is equipped with a type ‘’Y’’ cord cable.

16. The circuit breaker switches of the cooker shall

be placed so that end user can reach them when the cooker is installed.

17. Fixed connections shall be connected to a power supply enabling omnipolar disconnection. For appliances with over voltage category below III,

disconnection device shall be connected to xed power

supply according to wiring code.

18. Do not remove ignition switches from the appliance. Otherwise, live electric cables can be accessed. It may cause an electric shock.

Methods for Protecting Ceramic Glass Cooking Surface

Ceramic glass surface is unbreakable and scratch resistant to a certain degree. However, to avoid any damage, please do the following:

1. Never pour cold water on hot cookers.

2. Do not stand on a ceramic glass plate.

3. Sudden pressure, for example, the effect of a falling

salt shaker may be critical. So, do not place such objects on a place above the hobs.

4. After each use, make sure that the base of the cooking

pot and surfaces of cooking zones are clean and dry.

5. Do not peel vegetables on the hob surfaces. Sand

grains falling from the vegetables may scratch the ceramic glass plate.

6. Do not lay ammable materials such as cardboard

or plastic on the oven. Objects such as tin, zinc, or aluminium (as well as aluminium foils or empty coffee pots) may melt on hot cooking surfaces and thus cause damage.

7. Take care not to let sugary foods or fruit juices contact

the hot cooking zones. The ceramic glass surface may be stained by these.

Intended Use

1. This product is designed for home use. Commercial

use of the appliance is not permitted.

2. This appliance may only be used for cooking

purposes. It shall not be used for other purposes like heating a room.

3. The manufacturer assumes no responsibility for any

damage due to misuse or mishandling.

4. Operational life of the product you have purchased

is 10 years. This is the period for which the spare parts

required for the operation of this product as dened is

provided by the manufacturer.

Electrical Connection

1. Setting conditions of this appliance is indicated in tag or data plate.

2. Your appliance should be plugged in a fuse appropriate for electric

power. If necessary, it is recommended that installation is done by authorized service.

3. Your appliance is congured in accordance with electrical supply of

220-240 V AC / 380-415 V 3N AC 50/60 Hz.

4. If main electrical network is different from these values, contact with

your authorized service.

5. Electrical connections of your appliance should only be made to the

fuses having suitably wired grounding (grounded) system. If no convenient fuse is available in the place where your appliance is to be installed,

contact with authorized service immediately. Manufacturing rm is not responsible denitely for the damages that fuses whose grounding is not

made and connected to the appliance can cause.

6. Plug of the appliance should be close to be accessed easily to the

fuse whose grounding is made without use of extension cord.

7. Do not allow contacting the power cable of your appliance with hot

regions. Similarly, keep away it from sharp edges and corners.

8. If feeder cord is damaged, this cord should be replaced either by

manufacturer or its service agency or same degree qualied personnel in

order to hinder a dangerous situation.

9. Wrong electrical connection may give damage to the appliance.In

this case, your appliance will remain out of guarantee scope. Electrical connection of your appliance should be done by authorized service.

Electrical connection scheme

Get electrical connection of your appliance done to authorized person in line with the following scheme.

220-240V~50/60H

220-240V~50/60Hz

Neutral Neutre

Live

Phase

H05 VV-F 3G 4 mm²

Earth Terre Erdung

380-415 V 3N~50/60Hz

H05 VV-F 5G 1,5 mm²

Neutral Neutre

Earth Terre Erdung

380-415 V 2N~50/60Hz

H05 VV-F 4G 1,5 mm²

Neutral Neutre

Earth Terre Erdung

INTRODUCTION OF THE APPLIANCE

1. Heater positions

2. Glass or metal surface

3. Control switches

4. Hotplate (145 mm or 180 mm) *

5. Ceramic heater (180 mm or 140 mm) *

6. Double ceramic heater (120 mm / 180 mm or 220 mm / 300 mm) *

7. Ovaldual ceramic heater (140 mm / 250 mm) *

Technical features

You can operate electric cooktops by turning the button on control panel you want to use to the level you desire. Cooktop powers as per levels are given in the following table.

Specications Level 1 Level 2 Level 3 Level 4 Level 5 Level 6

80 mm hotplate 200 W 250 W 450 W --- --- ---

145 mm hotplate 250 W 750 W 1000 W --- --- ---

180 mm hotplate 500 W 750 W 1500 W --- --- ---

145 mm rapid hotplate 500 W 1000 W 1500 W --- --- ---

180 mm rapid hotplate 850 W 1150 W 2000 W --- --- ---

145 mm hotplate 95 W 155 W 250 W 400 W 750 W 1000 W

180 mm hotplate 115 W 175 W 250 W 600 W 850 W 1500 W

145 mm rapid hotplate 135 W 165 W 250 W 500 W 750 W 1500 W

180 mm rapid hotplate 175 W 220 W 300 W 850 W 1150 W 2000 W

180 mm ceramic heater 1800 W

140 mm ceramic heater 1200 W

140 / 250 mm ceramic heater 1800 W

120 / 180 mm ceramic heater 1700 W

220 / 300 mm ceramic heater 2400 W

Supply voltage 220-240 V AC / 380-415 V 3N AC 50/60 Hz.

WARNING: For the modication to be done by authorized service, this table should be considered. Manufacturer may not be held responsible for any problems rising because of any faulty modication.

WARNING: In order to increase the product quality, the technical

specications may be changed without prior notice.

WARNING: The values provided with the appliance or its accompanying documents are laboratory readings in accordance with the respective standards. These values may differ depending on the use and ambient conditions.

INSTALLATION OF COOKTOP

Check if the electrical installation is proper to bring the appliance in operating condition. If electricity installation is not suitable, call an

electrician and plumber to arrange the utilities as necessary. Manufacturer

shall not be held responsible for damages caused by operations performed by unauthorized persons.

WARNING: It is customer’s responsibility to prepare the location the product shall be placed on and also to have the electrical installation prepared.

WARNING: The rules in local standards about electrical installations shall be followed during product installation.

WARNING: Check for any damage on the appliance before installing it. Do not have the product installed if it is damaged. Damaged products cause a risk for your safety.

Correct Place For Installation

Product is designed in accordance with the kitchen counters supplied from market. A safe distance should be left between the product and kitchen walls and furniture. If hood/aspirator will be

650 mm min.

ins ta ll ed over your appliance, obey to the recommendation of hood / aspirator manufacturer for assembly height. (min. 65 cm) The gap that cooktop is to be placed on the counter should be cut in line with cooktop installation dimensions.

For installation of the product, the rules specied in local standards

related to electricity should be complied.

+ 32 hidden pages