Page 1
Owner’s Manual
MOON
Series
PSX 5.3
Power Supply
Page 2
MOON PSX 5.3 Power Supply
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or another apparatus that produces
heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for safety. If the provided plug does not fit into the outlet, consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments and accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as when the power cord or plug has been damaged; liquid has been spilled or objects have fallen into the
apparatus; or the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. No naked flame sources, such as candles, should be placed on the apparatus.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
____________________________________________________________________________________
Page 3
MOON PSX 5.3 Power Supply
Important Safety Instructions (cont’d)
The lightning flash with the arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Marking by the “CE” symbol (shown left) indicates compliance of this device with the
EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the
European Community
Please read all instructions and precautions carefully and completely before
operating your Simaudio MOON PSX
5.3 Power Supply.
1. ALWAYS disconnect your entire system from the AC mains before connecting or disconnecting any cables,
or when cleaning any component.
2. The MOON PSX
earth ground connection. To prevent shock hazard, all three connections must ALWAYS be used. Connect
the MOON PSX
number label will indicate the correct voltage. Use of any other voltage will likely damage the unit and void
the warranty.
3. AC extension cords are NOT recommended for use with this product.
4. NEVER use flammable or combustible chemicals for cleaning audio components.
5. NEVER operate the MOON PSX
open unit, especially if it is still connected to an AC source, presents a potentially lethal shock hazard. Refer
all questions to authorized service personnel only.
6. NEVER wet the inside of the MOON PSX
5.3, immediately disconnect it from the AC mains and take it to your MOON dealer for a complete
PSX
check-up.
7. NEVER spill or pour liquids directly onto the MOON PSX
8. NEVER block air flow through ventilation slots or heatsinks.
9. NEVER bypass any fuse.
10. NEVER replace any fuse with a value or type other than those specified.
11. NEVER attempt to repair the MOON PSX
12. NEVER expose the MOON PSX
13. NEVER operate the MOON PSX
14. ALWAYS keep electrical equipment out of reach of children.
15. ALWAYS unplug sensitive electronic equipment during lightning storms.
5.3 must be terminated with a three-conductor AC mains power cord which includes an
5.3 only to an AC source of the proper voltage; Both the shipping box and rear panel serial
5.3 with any covers removed. There are no user-serviceable parts inside. An
5.3 with any liquid. If a liquid substance does enter your MOON
5.3.
5.3. If a problem occurs contact your MOON dealer.
5.3 to extremely high or low temperatures.
5.3 in an explosive atmosphere.
____________________________________________________________________________________
Page 4
MOON PSX 5.3 Power Supply
Table of Contents
Congratulations ............................................... 5
Unpacking and Warnings ................................... 5
Introduction .................................................... 6
Installation & Placement ................................... 6
LP5.3 Internal Settings ..................................... 7
Rear Panel Connections ..................................... 8
Operating the PSX
Specifications .................................................10
5.3 ....................................... 9
www.simaudio.com
____________________________________________________________________________________
Page 5
MOON PSX 5.3 Power Supply
Congratulations!
Thank you for selecting the MOON PSX 5.3 Power Supply as a part of your music system. This component has been
designed to offer state-of-the-art high-end performance in an elegant package, while retaining all the sonic hallmarks on
which Simaudio has made its reputation. We have spared no effort to ensure that it is provides a significant improvement to
the sonic performance of your MOON LP5.3 Phono Preamplifier. We have been building high-performance audio
equipment for almost 30 years, and the know-how gained through our cumulative experience is an important reason why
MOON audio components are so musically satisfying.
The performance of your PSX 5.3 will continue to improve during the first 200 hours of use. This is the result of a “break-in”
period required for the numerous high quality electronic parts used throughout this Power Supply.
IMPORTANT !
Before setting up your new MOON PSX 5.3, there are mandatory internal
adjustments that must be made to the LP5.3 Phono Preamplifier! Failure to make
the adjustments before connecting it to the PSX 5.3 may result in damage that is
not covered by warranty! Refer to page 7 of this manual for instructions.
We hope you enjoy using the MOON PSX 5.3 Power Supply as much as the pride we have taken in creating this fine audio
product. We understand the power and emotion of music and build our products with the goal of faithfully capturing these
elusive qualities.
The information contained in this manual is subject to change without notice. The most current version
of this manual is available on our official website at http://www.simaudio.com/manuals.htm
Unpacking
The MOON PSX 5.3 Power Supply should be removed from its box with care.
The following accessories should be included inside the box with your Power Supply:
DC 4-pin XLR cable
This owner’s manual
As soon as the Power Supply is safely removed from its box and placed down, perform a thorough physical inspection and
report any physical damage to your dealer
safe, dry place in the event that you’re required to transport this product. The customized packaging is specially designed to
protect the MOON PSX
Please write the serial number of your new Simaudio MOON PSX 5.3 in the space provided below for future reference.
____________________________________________________________________________________
Congratulations / Unpacking 5
Warranty and product registration information (USA and Canada only)
immediately. We suggest that you keep all of the original packaging, storing it in a
5.3 Power Supply from potential damage that may occur during shipping.
Serial No.: ________________
Page 6
MOON PSX 5.3 Power Supply
Introduction
Your MOON PSX 5.3 Power Supply incorporates many significant design features to enhance the “world class”performance
of your MOON LP
High quality toroidal transformer.
4 stages of DC voltage regulation.
Total capacitance of 35,200uF.
Dual choke inductance (2x 200mH).
Special "pi-type" filter after initial voltage rectification stage to reduce AC transmission noise.
Dual action voltage regulation system to further lower noise.
DC signal noise is 150dB lower within LP5.3 circuitry.
Reduces the LP5.3’s signal-to-noise ratio by over 3dB, regardless of its selected internal gain setting.
Pure copper circuit board tracings with extremely low impedance characteristics.
Accurate matching of the finest high quality electronic components.
Designed to be powered up at all times for optimal performance.
Low operating temperature for a longer than normal life expectancy.
5.3 Phono Preamplifier. This is an abbreviated list of the more important features:
Installation & Placement
The MOON PSX 5.3 requires reasonable ventilation to maintain an optimum and consistent operating temperature. As a
result, it should be placed in a location with empty space around it for proper heat dissipation. As well, it should be placed on
a solid level surface. You should avoid placing it near a heat source or inside a closed cabinet that is well ventilated as this
could compromise this component’s performance and reliability.
or underneath this Power Supply.
The PSX 5.3 uses a toroidal transformers in its power supply; even though it is well shielded, you should place this power
supply at a minimum distance of 18 inches from source components sensitive to EMI, such as your LP
Players.
____________________________________________________________________________________
Introduction / Installation & Placement 6
You should never place another component directly on top of,
5.3, turntables, and CD
Page 7
MOON PSX 5.3 Power Supply
LP 5.3 Internal Settings
A B A B
Figure 1: MOON LP5.3 Circuit Board layout
Prior to connecting your MOON LP
(2) internal jumpers inside your MOON LP
5.3 Phono Preamplifier to the MOON PSX 5.3 Power Supply, you must move two
5.3. Please refer to page 8 of your MOON LP5.3 owner’s manual for detailed
instructions on how to remove the chassis cover. Referring to the above diagram of the LP5.3, you will see an array of four
(4) jumper sockets labeled STR1, STR2, STR3 and STR4. The factory default position for the 2 jumpers is in sockets STR2 and
STR4 (positions B in figure 1). To properly operate the MOON LP
to move these 2 jumpers into sockets STR1 and STR3 (positions A in figure 1).
5.3 in conjunction with the MOON PSX 5.3, you will need
Failure to make these adjustments may cause
damage that is not covered by warranty.
____________________________________________________________________________________
LP 5.3 Internal Settings 7
Page 8
MOON PSX 5.3 Power Supply
Rear Panel Connections
Figure 2: MOON LP5.3 Rear panel Figure 3: MOON PSX 5.3 Rear panel
The rear panel of the MOON PSX 5.3 will look similar to Figure 3 (above right). There is a 4-pin female XLR connector,
labeled “DC output”, located on the left side. On the right side are the the power “main switch” and IEC receptacle, labeled
“AC Input”.
To connect the MOON LP 5.3 Phono Preamplifier to the MOON PSX 5.3 Power Supply, follow these steps:
1. Disconnect the AC power cord from your MOON LP 5.3.
2.
Use the supplied DC 4-pin XLR cable to connect the “DC Output” on the MOON PSX 5.3 to the “DC Power”
input on the MOON LP
end (with 4 holes) connects to the MOON LP
cable is specifically designed for this application.
3. Connect the MOON LP5.3’s AC power cable to the IEC receptacle, located on the PSX5.3’s rear panel. Alternatively, if
you wish, you may use a dedicated high-performance AC cable designed for for preamplifiers. Ensure that the AC wall
outlet you use has a functioning ground. For the best sonic performance, it is preferable that you plug your PSX
directly into a dedicated AC outlet and avoid using an extension cord. If you have the time and willingness, consider
installing a superior quality AC wall outlet such as a hospital grade Hubbell.
4. In order to obtain the maximum performance from your audio system, we strongly recommend that the detachable
power cord not come into physical contact with any of the interconnect cables from your audio system. In the event that
this can’t be avoided, you should ensure that any cables coming into contact with each other are crossed at ninety degree
angle to minimize the contact area.
5.3. The male end (with 4 pins) of the cable connects to the MOON PSX 5.3 and the female
5.3. Do not use an aftermarket or custom 4-pin XLR cable as the supplied
5.3
____________________________________________________________________________________
Rear Panel Connections 8
Page 9
MOON PSX 5.3 Power Supply
Operating the PSX 5.3
Since your MOON LP 5.3 Phono Preamplifier is not equipped with its own on/off power switch, powering it on and off is
accomplished via the MOON PSX
We recommend that you leave your MOON PSX
performance. In the event that you plan to be away from your home for a few days, powering off the MOON PSX
not be a bad idea. Once fully “broken-in”, please keep in mind that both your MOON PSX
several hours of playing time before they reach peak performance again.
Powering up your MOON PSX5.3 for the first time
Prior to making the AC connection for the first time, make sure that every cable is properly connected to avoid any problems.
Once the PSX
the ‘1’ (on) position. The blue LEDs on the front panel of both the MOON PSX
same time.
5.3 is connected to an AC source you may power it up by flicking the main rocker switch labeled “POWER” to
5.3 Power Supply’s on/off switch, located on the rear panel.
5.3 Power Supply powered up at all times to maintain optimal sonic
5.3 may
5.3 and MOON LP 5.3 will require
5.3 and MOON LP 5.3 will illuminate at the
On and Off Sequence
To avoid having any annoying noises (ie. “thumps” and “pops”) emanate from your speakers when powering your PSX 5.3 on
or off, you should
1) Always power up your PSX 5.3 before powering up your preamplifier and/or integrated amplifier.
2) Always power down your PSX
When you power down the MOON PSX 5.3, the blue LEDs on both units will remain illuminated for up to 10 seconds; this is
normal and is the result of the large amount of storage capacitance found in the MOON PSX
____________________________________________________________________________________
Operating the PSX 5.3 9
5.3 after powering down your preamplifier and/or integrated amplifier.
5.3 Power Supply.
Page 10
MOON PSX 5.3 Power Supply
Specifications
MOON PSX 5.3:
Transformer ............................................................ 25VA
Total Capacitance ................................................... 35,200µF
Total Inductance ..................................................... 400mH
Power Consumption ................................................ 9 Watts
AC Power Requirements ......................................... 120V or 240V, 60Hz or 50Hz
Shipping Weight ..................................................... 8 lbs / 3.5 Kgs
Dimensions (W x H x D, inches) .............................. 8 x 3.25 x 11
MOON LP 5.3:
Signal-to-Noise Ratio (full scale @ 40dB gain) ......... 114dBr
Signal-to-Noise Ratio (full scale @ 66dB gain) ......... 92dBr
Note: All other MOON LP5.3 specifications remain unchanged
when using it in conjunction with the MOON PSX5.3.
Fuse Replacement: For the 120V version use a 0.2A slow blow (5 x 20mm size).
For the 230V version use a 0.1A slow blow (5 x 20mm size).
____________________________________________________________________________________
Specifications 10
Loading...