SimAudio 600i v2 Evolution Owner's Manual
600i v2 Evolution Series
Dual-Mono Integrated Amplifier
Owner’s Manual
600i v2 Evolution Series
Owner’s Manual
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves or another
apparatus that produces heat.
9. Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two
blades with one wider than the other. A groundingtype plug has two blades and a third grounding
prong. The wide blade or the third prong is
provided for safety. If the provided plug does not fit
into the outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus. Unplug mains cord during
transportation.
11. Only use attachments and accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer
or sold with the apparatus. When a
cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as when the power cord
or plug has been damaged; liquid has been spilled
or objects have fallen into the apparatus; or the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. No naked flame sources, such as candles, should be
placed on the apparatus.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
600i v2 Evolution Series
Important Safety Instructions (cont’d)
The lightning flash with the arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Marking by the “CE” symbol (shown left) indicates compliance of this device with the
EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the
European Community
Please read all instructions and precautions carefully and completely
before operating your MOON 600i v2 Integrated Amplifier.
1. ALWAYS disconnect your entire system from
the AC mains before connecting or
disconnecting any cables, or when cleaning any
component. To completely disconnect this
apparatus from the AC mains, disconnect the
power supply cord plug from the AC receptacle.
2. The MOON 600i v2 must be terminated with a
three-conductor AC mains power cord which
includes an earth ground connection. To
prevent shock hazard, all three connections
must ALWAYS be used. Connect the
600i v2 only to an AC source of the proper
voltage; Both the shipping box and rear panel
serial number label will indicate the correct
voltage. Use of any other voltage will likely
damage the unit and void the warranty
3. AC extension cords are NOT recommended for
use with this product. The mains plug of the
power supply cord shall remain readily
accessible.
4. NEVER use flammable or combustible
chemicals for cleaning audio components.
5. NEVER operate the
covers removed. There are no user-serviceable
parts inside. An open unit, especially if it is still
connected to an AC source, presents a
potentially lethal shock hazard. Refer all
questions to authorized service personnel only.
MOON 600i v2 with any
MOON
6. NEVER wet the inside of the MOON 600i v2
with any liquid. If a liquid substance does enter
your MOON 600i v2, immediately disconnect it
from the AC mains and take it to your MOON
dealer for a complete check-up.
7. NEVER spill or pour liquids directly onto the
MOON 600i v2.
8. NEVER block air flow through ventilation slots
or heatsinks.
9. NEVER bypass any fuse.
10. NEVER replace any fuse with a value or type
other than those specified
11. NEVER attempt to repair the
a problem occurs contact your MOON dealer.
12. NEVER expose the
high or low temperatures.
13. NEVER operate the
explosive atmosphere.
14. ALWAYS keep electrical equipment out of
reach of children.
15. ALWAYS unplug sensitive electronic
equipment during lightning storms.
16. WARNING: Do not expose batteries or battery
pack to excessive heat such as sunshine, or fire
or the like.
MOON 600i v2 to extremely
MOON 600i v2. If
MOON 600i v2 in an
Owner’s Manual
Table of Contents
Introduction 6
Unpacking 7
Installation & Placement 7
Front Panel Controls 8
Software Setup 9
Rear Panel Connections 15
SimLink™ 16
Operating the 600i v2
16
Remote Control Operation 17
Troubleshooting 19
Balanced Operation 19
Specifications 20
Quick Reference: Setup Menus Appendix
www.simaudio.com
Simaudio Ltd., 1345 Newton Road
Boucherville, Québec J4B 5H2 CANADA
Date Code: 20170510
600i v2 Evolution Series
Introduction
Thank you for selecting the MOON 600i v2 Dual-Mono
integrated amplifier as a part of your hi-fi reproduction
system. This integrated amplifier has been designed to
offer state-of-the-art high-end performance in an
elegant package, while retaining all the sonic hallmarks
on which Simaudio has made its reputation. We have
spared no effort to ensure that it is among the finest
two-channel integratedamplifiers available. We have
been building high-performance audio equipment for
over 30 years, and the know-how gained through our
cumulative experience is an important reason why
MOON integrated amplifiers are so musically satisfying.
Your new integrated amplifier is a true Dual-mono
design, whereby each channel operates completely
independent of the other. The chassis, power cord and
power switch are the only parts of this amplifier that
both channels share. The performance of your 600i v2
will continue to improve during the first 400 hours of
listening. This is the result of a “break-in” period
required for the numerous high quality electronic parts
used throughout this amplifier.
Before setting up your new 600i v2, we encourage you
to please read this manual thoroughly to properly
acquaint yourself with its features. We hope you enjoy
listening to the MOON 600i v2 Dual-Mono integrated
amplifier as much as the pride we have taken in creating
this fine audio product. We understand the power and
emotion of music and build our products with the goal
of faithfully capturing these elusive qualities.
The information contained in this manual is subject to
change without notice. The most current version of this
manual is available on our official website at
http://www.simaudio.com
Your MOON 600i v2 dual-mono integrated amplifier
incorporates many significant design features to
achieve its “world-class” level of performance. This is an
abbreviated list of the more important features:
Our “no overall feedback” amplifier circuit design. The results
are: Real-time amplification is achieved since interactions from
the speaker back to the amplifier are virtually eliminated;
More accurate musical reproduction with respect to tonality;
Virtually non-existent transient intermodulation distortion
(which is far more degrading to sonic performance than
harmonic distortion); The elimination of common phase
errors resulting from feedback.
Custom proprietary toroidal transformer design with lower
magnetic, electrical and thermal loss, yielding an improved
power transfer and lower regulation factor. The result is
increased current speed and better dynamics.
An oversized dual-mono power supply and “Class A”
power output to 5 watts for greater efficiency.
SimLink
between other compatible MOON Evolution Series
components.
Each line input is fully configurable to be “home theater
ready”, where the volume control of the 600i v2 is bypassed.
M-eVOL2 volume control circuit using MDAC’s (operating in a
current steering R-2R configuration) which alter the audio
signal’s amplitude and yield no sonic degradation of the
signal regardless of the selected volume setting .
M-Lock circuit for “user selectable” maximum volume setting
lock-out for each line input.
RS-232 port for i) full unsolicited bidirectional feedback in
custom installation setups and ii) firmware updates.
Gain offset for each individual line input with a ±10dB range.
Proprietary MOON Bipolar Output transistors with
TM
controller port allows for 2-way communications
unprecedented gain linearity resulting in improved bass
response and even more accurate sonic reproduction.
530 individual volume steps in 1dB and 0.1dB increments.
Ultra rigid chassis construction to minimize the effects of
external vibrations.
6
Owner’s Manual
Unpacking
The MOON 600i v2 should be removed from its box with care.
The following accessories should be included inside the box with your integrated amplifier:
AC power cable
FRM-3 remote control with three ‘AAA’ batteries)
SimLink™ cable with 1/8” mini plug terminations on each end
This owner’s manual
Warranty and product registration information (USA and Canada only)
Once the 600i v2 is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We
suggest that you keep all of the original packaging, storing it in a safe, dry place in case you’re required to
transport this product. The customized packaging is specially designed to protect the 600i v2 from any potential
damage during transit.
Please write the serial number of your new MOON 600i v2 in the space provided below for future reference.
Serial Number
Installation
The MOON 600i v2 Dual-Mono integrated amplifier is
both powerful and heavy. It requires reasonable
ventilation to maintain an optimum and consistent
operating temperature, especially since it will radiate
heat when driven hard. Consequently, it should be
placed in a location with empty space around it for
proper heat dissipation. You should never place another
component on top of this integrated amplifier. As well,
the integratedamplifier should be placed on a solid
level surface. You should avoid placing it near a heat
source or inside a closed cabinet that is not well
ventilated as this could compromise the amplifier’s
performance and reliability. The 600i v2 uses two large
toroidal transformers in its power supply; even though
they are well shielded, you should not place this
integrated amplifier too close to source components
sensitive to EMI, such as turntables, phono preamplifiers
and CD Players.
If the surface you have chosen isn’t perfectly level, each
of the four (4) cones of your 600i v2 are height
adjustable; carefully using your fingers, you can either
raise each leg by turning the cone underneath
clockwise, or lower each leg by turning it
counterclockwise.
We strongly recommend that you leave these cones
mounted to the component at all times for reasons
related to both performance and aesthetics.
7
Loading...