SIMA 5X1 HDMI
SWITCHER
Model VS-HD51
Please register online at
www.simaproducts.com
User Manual for VS-HD51 HDMI switcher
Caution:
IMPORTANT SAFEGUARDS FOR AUDIO PRODUCTS.
PLEASE READ CAREFULLY THE FOLLOWING IMPORTANT
SAFEGUARDS THAT ARE APPLICABLE TO YOUR EQUIPMENT
1. Read instructions - All the safety and operating instructions should be read before the appliance is operated.
2. Retain instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow instructions - Follow all operating and use instructions.
5. Water and Moisture - the appliance should not be used near water - for example: near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement or near a swimming pool.
6. Ventilation - The appliance should be located so that its location or position does not interfere with proper ventilation.
For example: the appliance should not be situated on a bed, sofa, rug or similar surface that may block the ventilation
openings.
7. Heat - the appliance should be situated away from heat sources such as radiators, registers, stoves or other heatproducing appliances .
8. Power sources - the appliance should be connected to a power supply only of the type described in the operating
instructions or as marked on the appliance.
9. Grounding or polarization. - Precautions should be taken so that the polarization or grounding means of the appliance is
not defeated.
Caution: To prevent electric shock, match the wide blade of this plug to the wide slot, fully insert. Do not use this polarized
plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
10. Power cord Protection - Power supply cords should be routed so they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and where they
exit from the appliance.
11. Cleaning - Wipe unit with a damp cloth occasionally to keep it looking new. Do not use harsh chemicals, cleaning
solvents or strong detergents.
12. Nonuse periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long
period of time.
13. Object and Liquid entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure
through openings.
14. Damage requiring service - The appliance should be serviced by qualified personnel when: the power cord has been
damaged, objects have fallen or liquids spilled into the appliance, the appliance has been exposed to rain, does not
appear to operate normally or exhibits a marked change in performance or the unit has been dropped or the enclosure
damaged.
15. Service - The user should not attempt to service the appliance beyond that described in the operating manual. All
other servicing should be referred to qualified service personnel.
Notice to Users
The system may cause interference to a TV or radio even when it is operating properly. To determine whether the system
is causing the interference, turn it off. If the interference goes away, the system is causing the interference.
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try
to correct the
interference by one or more of the following measures:
·Reorient or relocate the receiving antenna.
·Increase the separation between the equipment and receiver.
·Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
·Contact your dealer for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two Conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment
©2006 by Sima Products Corp.
2
User Manual for VS-HD51 HDMI switcher
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means without
prior written permission from Sima Products Corp.
INTRODUCTION
Congratulations on your purchase of the 5x1 HDMI Switcher. Sima Products
HDTV switchers are designed to make your A/V equipment more efficient, more
creative and most affordable to use. The 5x1 HDMI Switcher allows three HDTV
HDMI devices to be switched easily in to one HDTV HDMI compatible monitor or
projector. Simply connect your HDTV display to the Switcher’s display output.
The 5x1 HDMI Switcher can also be placed at the end of a long HDMI cable to
regenerate an HDMI signal.
FEATURES
• Switches easily between any five HDMI sources
• Maintains 480p, 720p, 1080i, and 1080p resolution
• PC Support: VGA, SVGA, XGA, SXGA, and UXGA (1600 x 1200)
• Maintains highest HDMI single link video resolution
• Maintains highest HDMI digital audio signal
• Supports HDCP compliant devices
• HDMI or DVI to HDMI cables are used to connect the inputs and switcher
output
• Inputs can be toggled with the IR remote control
• RS-232 connection
Multi-unit connectivity •
Includes:
• 5x1 HD MI Switcher
• 5V DC Power Supply
• IR Remote Control Model # CR-30 (Battery Included)
• This User Manual
3
User Manual for VS-HD51 HDMI switcher
PANEL DESCRIPTIONS
ront Panel
F
1. Power button
7. Input 5 button/indicator LED
2. IR eye 8. Auto input select button
3. Input 1 button/indicator LED 9. Signal Enhancement boos
t button
4. Input 2 button/indicator LED 10. Enhancement selector and LEDs
5. Input 3 button/indicator LED 11. HDMI input #5
6. Input 4 button/indicator LED
1 3
2
4 5 6 7
8 10 11
9
Rear Panel
Dip Switch settings:
switches are set as shown at right. If not, remove AC power, re-set the dip
switches and re-apply AC power.
Verify that the IR address and Front panel lock dip
RS-232 and IR IN/OUT - These connections allow you to control the unit
remotely or link several units together to act as one. The VS-HD51 has several unique features
for custom installation applications. For more information, go to
search for VS-HD51.
4
Input 4Input 3Input 2 Input 1 IR IN & OUT Output RS-232 IR address Ft panel Power
locks
www.simaproducts.com and
User Manual for VS-HD51 HDMI switcher
Auto-Set – This button allows the VS-HD51 to automatically select an input, when a device is
turned on. You can always manually select the input by pressing the desired input button.
Boost – This button boosts the incoming signal from a source. This is useful if you are using
longer cables between a source and the VS-HD51.
Enhance – This button lets you select among 4 output settings: normal, 2db,4db and 6db. It is
recommended to leave the ENHANCE setting off for most situations. If you see the picture
breaking up or not picture, try different of the Boost and Enhance modes. If you still don’t get an
acceptable picture, use a shorter cable or a higher quality of cable.
Remote Control
• Power button to toggle device on/off
• 9 digit keypad (1 –2 –3 will be used to toggle
between the inputs)
• Buttons 4 through 9 are not available with this
device. They are populated for future use.
• Remote takes a 3v Lithium button battery.
• Replacement battery # CR2025 can be found at a
local electronic retail store.
Pull tab to
activate
battery
Installation: How to connect the 5x1 HDMI Switcher to your devices
Satellite
dish
Set top box
DVD
player/recorder
Game
station
1. Make sure the rear panel dip switches are set as shown below.
2. Plug the 5VDC power supply into the 5x1 HDMI switcher and correct AC wall outlet.
3. Connect the cables from the HDMI sources into one of the HDMI inputs.
4. Connect a cable from the switcher output to the input on your monitor.
5. Use the power button on the front panel to turn the unit on and off.
6. Press the Input buttons on the front panel to select among the 5 inputs. Or use the IR remote
control to directly set an input.
HD TV /
monitor
Note: Input 5 is located
on the front panel
5
User Manual for VS-HD51 HDMI switcher
1080p Video
1080p (1080 lines of resolution, progressive scan mode) is a new high-resolution
video mode used on some of the newest DVD players and TVs. Because of the high
signal bandwidth, you will need to use the highest quality cables in order to obtain a
solid picture. It is recommended that these cables are HDMI certified. If you have
picture problems in 1080p mode you can either reduce the picture mode to 1080i
(interlaced) or 720p or purchase higher quality cables that are designed to support
1080p video.
SPECIFICATIONS:
Video Amplifier Bandwidth………………………………….…………….1.65Gbps
Input Video Signal………………………………………….…..……….1.2 volts p-p
Input Connector Type…………………………….…………HDMI Type A Female
Output Connector Type……………………………………..HDMI Type A Female
Power Source…………………………………………..…. .100-240VAC 50/60 Hz
Power Adapter Output…………………………………………..….…..5V DC 2.6A
Weight……………………………………………………..……………………...20oz
Dimensions……………………………………………….. 8.4” W x 4.2” D x 1.6” H
Limited Warranty
Sima Products Corp. (“Company”) warrants that is the accompanying product proves to be defective to the
original purchaser in material or workmanship within 90 days from the original retail purchase, the Company
will, at the Company’s option, either repair or replace same without charge (but no cash refund will be
made).
What you must do to enforce Warranty
You must deliver, mail or ship the product, together with the original bill of sale, this limited Warranty
statement as proof of warranty coverage to:
Sima Products Corporation
Attn: Customer Service
140 Pennsylvania Ave., Bldg. #5,
Oakmont, PA 15139
To receive special offers and discounts, register your product online at
Limitation of Liability and Remedies
Sima shall have no liability for any damages due to lost profits, loss of use or anticipated benefits, or other
incidental, consequential, special or punitive damages arising from the use of, or the inability to use, this
product, whether arising out of contract, negligence, tort or under any warranty, even if Sima has been
advised of the possibility of such damages. Sima’s liability for damages in no event shall exceed the amount
paid for this product. Sima neither assumes nor authorizes anyone to assume for it any other liabilities.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the a bove
limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights, which vary from state to state.
Copyright 2006 © Sima Products Corp.
140 Pennsylvania Ave. Bldg #5 Oakmont, PA 15139
www.simaproducts.com PN#21750
www.simacorp.com
6
Loading...