Sima UDC-2 Instruction Manual
Universal for
use with Camcorders
Battery Charger
Model UDC-2
©2004 Sima Products Corporation
140 Pennsylvania Ave. Bldg #5 Oakmont, PA 15139
800-345-7462 Fax 412-828-9338 www.simacorp.com
PN217001
Works with these
camcorders:
Sony JVC
RCA Canon
Sharp Hitachi
& more!
If you have trouble installing your battery
or if it is not listed on this chart,
do not call the store where you purchased the UDC-2.
Call Sima customer service at 800-345-7462
Brand Volt Batt. type Model Number Tray
Canon 6V NiCad/NiMH BP-E77/711/714/718/722/729 Base
Canon 7.2V Lithium Ion BP-80/85 A
Canon 7.2V Lithium Ion BP-608/617 C
Canon 7.2V Lithium Ion BP-911/914/915/924/927/930/941/945 C
Hitachi 6V NiCad/NiMH VM-BP82/82A/83/84/84A Base
Hitachi 7.2V Lithium Ion VM-BPL13A/27A/30A/60A A
Hitachi 7.2V Lithium Ion DZ-BP16/28 C
JVC 6V NiCad/NiMH BN-V11U/12U/14U/140U/22U/50U/60U Base
BN-V20U/25U Base
JVC 7.2V Lithium Ion BN-V607/615U A
JVC 7.2V Lithium Ion BN-V812/814U A
Panasonic 6V NiCad/NiMH PV-BP15/17/18/ VW-VBS1E/S2E Base
Panasonic 7.2V Lithium Ion VW-VBD1/PV-BP5/AG-BP25 A
Panasonic 7.2V Lithium Ion CGR-D120/220/320/S602/ C
PV-BP8A/VW-VBD20 C
CGA_DU07/14/21 C
RCA 6V NiCad/NiMH BB-45/75L/060/120/FB120/1260 Base
RCA 7.2V Lithium Ion BB-55L/65L/85L A
Sharp 6V NiCad/NiMH BT-80 Base
Samsung 7.2V Lithium Ion SB-L110/220 C
Samsung 7.2V Lithium Ion SB-L160/320/480 C
SONY 6V NiCad/NiMH NP-55/66/67/68/77/78/98 Base
SONY 7.2V Lithium Ion NP-FF50/70 A
SONY 7.2V Lithium Ion NP-F100/200/300 A
SONY 7.2V Lithium Ion NP-F330/530/550/730/730H/750/750 A
SP/930/950/960 A
SONY 7.2V Lithium Ion NP-FM30/50/70/90/91/QM50/70/90 A
Battery Chart
Warranty Statement
Sima Products Corporation (”Company”) warrants that if this product proves to be defective to the original purchaser
in material or workmanshipwithin 90 days from the date of original retail purchase, the company will, at the
company’s option, either repair or replace same without charge (but no cash refund will be made).
ship your unit, freight pre-paid, including reasonable proof of date and place of purchase
and description of problem to:
This LimitedWarranty covers all defects in material and workmanship in the product, except damage
resulting from accident, misuse, abuse, attempted repair by anyone other than the Company, neglect or from their
normal and ordinary use of the product. The Company accepts no liabilities or obligations for consequential or
incidental damage arising out of or in connection with the use or performance of the product. The Limited Warranty
provides you with specific legal rights, you may have additional legal rights provided to you under the laws of your
state or federal laws.
To enforce this warranty,
Attn: Customer Service
c/o Sima Products Corporation
140 Pennsylvania Ave. Bldg #5
Oakmont, PA 15139
Exclusions:
Safety and Maintenance
DO NOT use charger inside a drawer, closed cabinet, on a carpet
or cover with a cloth. The charger will become slightly warm in
normal use, but if contained, heat may damage the charger and
battery pack.
DO NOT
DO NOT
NEVER IMMERSE IN LIQUID!
DO NOT
DO NOT
DO NOT
atttempt to open the charger, there are no serviceable
parts. Doing so will void the warranty.
allow moisture of any kind to come in contact with the
charger.
store where it may be exposed to extreme temperatures;
avoid placing in direct sunlight. High temperatures can shorten the
life of electronic devices, damage batteries and warp metal or
plastics.
short circuit the output terminal or contacts.
drop the unit, a jolt can cause permanent damage and is
not covered by the warranty If the charger must be cleaned, be
sure it is unplugged. Wipe the unit with a clean cloth, lightly
dampened with mild detergent. Use a clean cloth, lightly dampened
with rubbing alcohol to clean the metal contacts.
Trouble Shooting
Problem
No Indicator
Lightswith
battery mounted
Hissing noise in
Charging Mode
Possible Cause/Solution
Confirm the AC or cigarette adapter is firmly
connected at both ends. Confirm that wall outlet is
working. Check fuse in car cord (un-screw tip of
cigarette lighter adapter).
• Battery is already fully charged.
• Battery mounted incorrectly; remove and
re-mount battery. Clean battery/charger contacts.
Normal operation due to advanced switching
circuitry.
www.simacorp.com
800-345-7462
Includes 3 adapter trays to charge
Lithium - ion,
Ni-Cad
and NIMH batteries
Includes AC & DC adapters
Mounting the Batteries
To install the battery - Typically, you can install the battery onto the
charger plate the same way you install the battery onto your
camcorder.
Follow the guides on the battery and the
charger. The battery should slide easily into place. If it does not, do
not force the battery into place. Realign the guides and try
again.
Align the contacts on your battery with the appropriate
contacts on the charger.
The UDC-2 will automatically detect the battery type and
voltage from the tray.
Charging the Battery
As soon as the battery is properly mounted, charging begins as indicated
by the steady red light on the Charge Status indicator.(Fig. 1 below) When
charging is complete, the green Full Status indicator will turn on (fig. 2). At this
point, the battery can be removed for use. Removing the battery at this point
will not harm it. It is recommended that you leave the battery connected tot he
charger for another 30 minutes to ensure a full or “topped off” charge
Discharging the Battery
To maximize the full power of your NiCad and NiMH batteries, we
recommend discharging before recharging. To discharge, mount the battery on
the tray and press the Discharge button. (Fig. 3 above). The yellow Discharge
Status indicator will turn on. When discharging is complete, the
red Charge Status indicator will turn
on (Fig. 1). Depending on the amount of charge left in the battery, this may
take several hours. Note: Lith-ion batteries do not require discharging.
battery will
automatically begin to recharge and the
Charge
Full
Discharge
Charge
Full
Discharge
Charge
Full
Discharge
Fig. 2 Fig. 3
Fig. 1
Press to
discharge
Technical Specs
Input: 12V DC
Standby Current: 30mA
Charge Current: 800mA @ constant current mode
Charge Termination: Fixed voltage Lithium (4.2V for 3.6V, 8.4V for 7.2V)
NiCad/NiMH (delta V)
Size & Weight 5.25” x 2.75” 3.1 oz.
Features
j
j
j
j
j
Precision end-of-charge detection assures a full charge
”Top-off” function trickle charges to maintain a full charge.
LED indicator displays charger mode.
Defective battery dectection.
Overcharge protection.
1.2.Base Unit
Charge Status indicator4.5.
3.
Full Indicator
Discharge status light
Discharge button
Plate 2
Base Unit and Trays
Plate A
Plate C
4
1
3
2
SLIDE
TOLOCK
INSERT
MODEL : UDC
UNIVERSALDIGITAL CHARGER
ForCanon
6volt
ForHitachi
6volt
5
Introduction
Congratulations on buying the Sima UDC-2, a universal battery charger for use
with digital camera batteries. Using the AC or DC adapters included, you can
quickly and easily charge your Nicad, NiMH or lithium ion camcorder batteries at
home or in the car. This package includes: UDC base unit, TrayA, Tray C &
Tray 2, 120V AC adapter, 12V DC car adapter and this instruction manual.
Mounting the Adapter Plates
Some battery models will require the use of an adapter plate (AA/AAA, 1 or 2).
Consult the battery chart in this manual to determine which adapter plate your
camera or camcorder battery requires.
Connect the 12V DC car cord plug
to the power input jack on the rear
of the UDC base. Plug the cigarette
lighter adapter into the cigarette
lighter socket of the vehicle. (See
diagram at right.) The green Full
indicator light will blink once.
To car cigarette lighter
How to Connect 120V AC Power Supply
Connect the AC adapter plug to
the Power Input jack on the rear
of the UDC base. Plug the AC
adapter into any standard 120V
AC household outlet. ( See
diagram at right.) The green Full
indicator light will blink once.
To 120V AC outlet
Power Input jack
How to Connect 12V DC Car Power Supply
Power Input jack
To remove the tray, slide it to the left.
To install the adapter trays
Step 1. Place the adapter tray onto the base unit.
Step 2. Align the arrow on the tray to
the INSERT dot on the base unit.
INSERT
SLIDE
TOLOCK
Step 3. Slide the tray to the right.
It will snap firmly in place.
1
2
-
+
-
+
3
Loading...