Sima SUP-60 User manual

www.simacorp.com

Visit our website

Can’t find your plug?

Universal Power Adapter

digital cameras and camcorders.

For use with

Model SUP-60

from state to state.
and you may have other rights, which vary
This warranty gives you specific legal rights
limitation or exclusion may not apply to you.
consequential damages, so the above
exclusion or limitation of incidental or
excluded. Some states do not allow for the
consequential damages is specifically
repairs.All liability for incidental or
by abuse, misuse, negligence or unauthorized
This warranty is void if any defects are caused

Oakmont, PA 15139
Bldg. #5
140 Pennsylvania Ave.
Attn: Customer Service
Sima Products Corporation

of purchase and description of problem to:
including reasonable proof of date and place
Conditions: Ship your unit, freight pre-paid,

purchase.
registration card within ten days of the original
Sima’s option. Mail the enclosed product
the product will be repaired or replaced at
date of purchase. During the warranty period,
workmanship for a period of 90 days from the
product against defects in materials and
Sima Products Corporation warrants this

90-day Limited Warranty

Introduction

Congratulations on your purchase of the Sima SUP-60 Universal Power Adapter. It
can power digital cameras and other portable electronic devices requiring 3.3 / 4.2 / 5.0
/ 6.5 / 8.4 or 9.5V DC power. It is fully regulated using high efficiency switching technology
and features overload and short circuit protection. The SUP-60 comes with seven
connectors to fit different digital cameras and other electronic devices. Additional
connectors are available from Sima.

This package Includes:

1 AC adapter 7 Center pin positive connectors

1 SUP-60 Manual

120 VAC

Operation

1. Set the output voltage switch, as illustrated in Fig. 1, to the
desired output for your device. Choose from the following
settings: 3.3 / 4.2 / 5.0 / 6.5 / 8.4 or 9.5 V.

Output

The SUP-60 comes with seven standard connectors. The

connectors allow you to match the size of your device’s DC

Voltage
Switch

input jack. If your device requires other types of connectors,
visit Sima’s customer service at www.simacorp.com.

The connectors supplied with the SUP-60 are all set in a

center pin positive alignment ( Fig. A) If your device

requires a center pin negative power source (Fig. B) do
not use this adapter. To determine the required current

and correct polarity for your device, refer to the
manufacturer’s instruction manual or specifications

Fig. A

OK

+ -

Fig. B

No

- +

2. Select the appropriate connector and attach it to the output socket at the end of the
output cord. To identify the correct connector for your device, see the list of digital
cameras on the reverse side of this sheet. If unsure, use the connector that fits the
power jack of your camera. The two-pin connectors can fit into the socket only one
way. Align the pins as shown at right in Fig. 2. One pin is larger
than the other. Do not force.

Input

2

Power
light

Output

socket

Fig. 1

3. Insert the connector into the power jack on your portable device.

4. Plug the AC adapter into the SUP-60’s input power jack
located at the top of the unit. Note: Do not plug the AC
adapter directly into anything except the SUP-60. Next,

Connector

Output
socket

plug the AC adapter into a standard AC wall outlet. The red
power light on the SUP-60 should turn on. You can now
operate your device.

IMPORTANT: Your portable device must be rated between 3 - 10V

Fig. 2

DC and no more than 2100 mA of current to use the SUP-60. If
the exact voltage for your device is not listed below and is less than 10V, you can try
setting the voltage switch to the nearest voltage – use the lower setting first. If the
device does not operate, disconnect the connector from the device, reset the voltage
switch to the next higher setting and re-connect. Do not continue trying higher

settings as they may result in damage to your device or the adapter.

The SUP-60’s current (mA) must be equal to or greater than the current your portable

device requires. Remember 1A = 1000mA, 0.5A = 500mA. Use the following chart
to determine the output current from the SUP-60:

Output Max. Output Max.
Voltage Current Voltage Current

3.3V = 2.1A 6.5V = 1.7A

4.2V = 2.0A 8.4V = 1.6A

5.0V = 1.9 A 9.5V = 1.5A

Resetting the Adapter

CAUTION: If the power light turns off, check the power source. If on, the output current

may be beyond the AC adapter’s specifications and overload protection has been activated.

To reset the adapter:

1. Remove the SUP-60 from the AC outlet and the device you are powering. Wait 10 sec.

2. Plug the SUP-60 into the AC outlet again. If the indicator remains off, there may be a

problem with the AC adapter. Contact Sima’s customer service for assistance.

Specifications:

AC adapter input: 120V AC, 60 Hz
AC adapter output: 13.5V DC, 1.2A

SUP-60 input: 12-15V DC,
Output rating: 3.3 / 4.2 / 5 / 6.5 / 8.4 or 9.5V DC
DC cord length: 1 m
Operation Temp: 32 to 113 degrees F
Storage temp.: -4 to 140 degrees F
Dimensions: 4” x 2.1” x 1.4”

Plug # & Size (diameter)

4.0 mm x 1.7 mm

4.75 mm x 1.7 mm

3.5 mm x 1.35 mm

3.0 mm x 1.0 mm
Sony L/M
Sony S/C
Sony F/C

Safety warnings and Cautions

WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
CAUTION: To reduce the risk of electric shock, do not remove cover or back. No user serviceable parts

inside. Refer servicing to qualified personnel.

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

This manual contains important safety and operating instructions for your AC power adapter. Before using

your adapter, read all instructions and cautionary markings on the product.

DANGER: To reduce the risk of fire or electric shock, follow these instructions.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Y our adapter is ETL listed to
UL standards and meets all applicable FCC standards.

WARNING: Changes or modifications to this unit may cause interference and void the user’s authority to

operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures: 1. Re-orient or relocate the receiving antenna. 2. Increase the separation between the
equipment and receiver. 3. Consult Sima customer service at www.simacorp.com if the problem still exists.

CAUTIONS: The adapter must attach to the power supply source with a built-in over-current protective
device (Max. 15A), such as a 15A fuse and branch circuit. Make sure the adapter is disconnected from the AC
outlet and device before adjusting the voltage setting. Do not use the adapter to power a device that exceeds
the maximum power rating.

Note: The SUP-60’s voltage must be the same as the voltage your portable device requires. The SUP-60’s
current (mA) must be equal to or greater than the current your portable device requires.

Digital Camera/Camcorder SUP-60 Connector Plug Chart

Brand Model # Voltage Plug size

AGFA ePHOTO CL-30/34/50/307/780/ 780C/1280/1680 6.5V 4.0 x 1.7

CANON IXUS, IXUS V,V2, V3, 100/110/230/300/330,/350, 4.2V 3.5 x 1.35
CANON A10/20/30/40 4.2V 4.0 x 1.7
CANON ZR60/65MC/70MC/80/85, Elura 40MC/60MC, Optura30 8.4V 3.5 x 1.35
CASIO QV-10A/11/70/100/120/200/300/700/770/780/2000UX/2300UX

QV-2400UX/2800UX/2900UX/3000EX/3000Plus/3500EX/4000E,
QV-5000SX/5500SX/7000SX/8000SX 6.5V 4.0 x 1.7

EPSON PC 550/600/650/700/750Z/800Z/850Z/2100Z/3000Z/3100Z 6.5V 4.7 x 1.7
FUJIFILM Finepix 50i/1300/1400Z/2300/2400Z/2700Z/2800Z/2900/3800/4800Z,

4900Z/6800Z/6900Z/DX-10, F401/402/601, M603, MX-500/600Z/700/1200
MX-1300/1400Z/1500/1700/2700/2900Z, S1 Pro, S2 Pro, S-304/602/3100 5.0V 4.0 x 1.7

HP PhotoSmart 120, 315, 318, 320, 612, 620, 720, 850 6.5V 4.0 x 1.7
JVC GRDV800U, GRDVL520U 8.4 V 3.5 x 1.35
KODAK DC40/50/120/200/200plus/210/210plus/215/220/240/240i/260/265/280

DC290/3200z/3400z/DC5000z 6.5V 4.75 x 1.7
KODAK DC4800, LS443, DX7430/7440/7590/7630 5.0V 4.0 x 1.7
KYOCERA Finecam S3/S3L/S4/S5 5.0V 4.0 x 1.7
MINOLTA Dimage 5/7/7Hi/7i/3D/1500/EX1500/2300/2330z, E201. RD3000, S304/S404 6.5V 4.7 x 1.7

NIKON Coolpix 100/300/600/700/750/800/900/950/990/2000 6.5V 4.7 x 1.7
NIKON CoolPix 775/880/885/995/4300/4500/5000/5700/8700 8.4V 4.75 x 1.7

OLYMPUS C-100/120/200Z/211/300Z/320L/700UZ/720UZ/730UZ/960Z/990Z/2000Z

C-2020Z/2030/2040Z/2100Z/2500L/3000Z/3020Z/3040Z/4000Z/4040Z/5050Z

D-200L/220L/320L/340L/340R/360L/370L/400Z/450L/450Z/460Z/500L/550Z

D-600L/620L, E-10/20/20P/100 RS 6.5V 4.7 x 1.7

OLYMPUS C-1/1Z/2/40Z/220Z, D-40Z/100/150Z/230/395/540/580 3.3V 4.0 x 1.7
OLYMPUS C-50Z, Stylus 300/410 4.2V 4.0 x 1.7

PANASONIC DMC-F7 5.0V 4.0 x 1.7
PANASONIC DMC-FZ1 8.4V 4.7 x 1.7
PANASONIC DMC-LC5/LC40 8.4V 4.7 x 1.7
PANASONIC PVDV - 102/203/402/53 8.4V 4.7 x 1.7
PANASONIC PVL-352/452/453/672 6.5V 4.0 x 1.7
PANASONIC SVAV-25/50A/50S/100, PVDV-103/953 8.4V 4.0 x 1.7
PANASONIC PVGS-9/12/15 8.4V 4.7 x 1.7
PENTAX Optio 330RS/430RS 4.2V 4.0 x 1.7
PREMIER DC620/820/1310,/1311/1500/2000 6.5V 4.7 x 1.7

RICOH Caplio PR1/PR10/PR120, RDC-2/2E/7/300/300Z/1500/1700/4200

RDC-4300/5000/5300/6000, 5.0V 4.0 x 1.7
SAMSUNG Digimax 800 6.5V 3.0 x 1.0
SANYO VPC-MZ1/AZ1 3.3V 4.0 x 1.7

SONY CD200/250/300/400/450/1000, F707/717, FD85/87/90/92/95/97/100

FD200, S50/70/75/85,. CCDTRV-118/128/318/460/608, DCRDVD-101/102

DCRHC-85, DCRTRV-260/460 8.4V Sony L/M

SONY P1/2/3/5/9/20/30/31/50/51/71 4.2V Sony S/C
SONY Cybershot DSC P8, P10, P32, P52, P72, P92, V-1, 4.2V Sony F/C
SONY DSC-V1/W1/P4/P8/P10/P32/P52/P72/P92/P93 4.2V 3.0 x 1.0
TOSHIBA PDR-M1/M3/M4/M5/M11/M21/M25/M60/M61/M65/M70/M71/M81 5.0V 4.0 x 1.7

Sima Products Corporation 140 Pennsylvania Ave. Bldg #5

Oakmont, PA 15139 USA

www.simacorp.com

Made in China © 2005 Sima Products Corporation PN21715