Sima BALI 700 MKNO Original User Manual
BALI 700 MKNO
ENGLISH
2
INDEX
1. GENERAL INFORM A TI ON ............................................................................ 4
2. GENERAL DESCRIPTION OF THE MACHINE ................................................. 4
2.1 PICTOGRAMS ................................................................................................................... 5
3. TRANSPORTATION ..................................................................................... 6
4. ELECTRICAL PLUGGING AND ADJUSTING THE BLADE ROTATION SENSE .... 6
5. ELECTRICAL EQUI PMENT ........................................................................... 7
6. SAFETY RECOMMEND A TIONS ..................................................................... 8
7. PARTS OF THE MACHINE ............................................................................ 9
8. MOUNTING AND DISMOUNTING THE CUTTING BLADE ............................. 10
8.1 MOUNTING/REPLACING THE CUTTING BLADE .................................................................... 10
9. STARTING AND USING THE MACHINE ...................................................... 11
9.1 BUILDING THE MACHINE ................................................................................................. 11
9.2 FILLING THE TRAY WITH WATER
9.3 POSITION OF THE MACHINE AND THE OPERATOR, CONNECTION AND DISCONNECTION
9.4 CHANGING THE CUTTING HEIGHT.
ENGLISH
...................................................................................... 12
........ 13
................................................................................... 14
10. MAINTENANCE ....................................................................................... 15
11. ANTI TIP CUTTING PLATFORM ............................................................... 15
12. SOLUTIONS TO MOST FREQUENT ANOMALIES ....................................... 16
13. TECHNICAL CHARACTERISTICS .............................................................. 17
14. WARRANTY ............................................................................................ 18
15. SPARE PARTS ......................................................................................... 18
16. ENVIROMENT PROTECTION. ................................................................... 18
1. DECLARATION OF NOISES. ....................................................................... 18
2. DECLARATIN OF MECHANICA L VIBR ATIONS. ........................................... 18
3. CIRCUIT DIAGRAMS ................................................................................. 19
3
1. GENERAL INFORMATION
WARNING: Pease read and understand perfectly the present instruction before using the machine.
SIMA S.A. thanks you for your trust in our products and for purchasi ng the TABLE SA W model BALI.
This manual provides you w ith the necessary instructions to star t, use, maintain and in your cas e, repair of
the present machine. All aspects as far as the safety and health of the users is concerned have been stated.
Respecting all instructio ns and recommendations assures safe ty and low maintenance. As such, re ading this manual
carefully is compulsory for any person responsi b le for the use, mainte nanc e or rep air of this mac hine .
As such, reading this manual carefully is compulsory for any person responsible for the use, maintenance or
repair of this machine.
It is recommended to have always this manual in an easily accessible place where the machine is being
used.
2. GENERAL DESCRIPTION OF THE MACHINE
SIMA Cutting Table Saws , Bali models, ar e designed and manufac tured to be us ed at masonry build ing sites,
in particular to cut until 20 cm high concrete blocks and other cons truction materials , mineral and compounds with at
least one bearing side (tile, terrazzo, brick, marble , gr anite , co ncre te or cera mic s shingle, stoneware... The cutting too l
is a diamond blade powered by an electric motor and water cooled by a closed-circ uit pump. The pro gress of the blade
is done manually by moving the cutting head in the direction of the material to be cut. The Bali models are
manufactured of high quality materials .
ENGLISH
Any use other than the machine has been designed for is considered inappropriate and can be
dangerous; therefore, it is expressly prohibited.
• Bali models are designed to solve the problem of cutting materials 20 cm hig h with the appropriate diamond
blade.
• Enable to move the head up and down directions easily and manually way , thro ugh turning and blocking the
head using the handle proportionate for the pur po se
• The head of the motor keep the right balance even when the block is cancel due a spring.
• Its steel chassis avoid vibrations d ur ing c utting . The re fo re we get a better eff ic ie ncy of the diamond blade.
• The carry in sliding cart is build with V wheels tread design.
• A rubber protection is dispose on the sliding cart in its upper side to avoid the sliding of the material being
cut.
• The machine has four demountable legs to facilitate its tr anspor t a nd handl e s for its disp lac e m e nt.
• The machine is protected with an anti-splatter scr een to avoid the water splashing towards the back part of
the machine where the cutting is being performed.
• Bali models have detachable legs to facilitate their transport.
• The action of the diamond blade is made through belts, getting a to tal silenc e .
• The frame of the machine is painted with a highly resistant anti-corrosion epoxy polyester paint.
• This machine has been designed and manufactured to cut with a water cooled diamond blade. The cooling is
carried out by a closed-circuit electric pump with a cons tant wate r f low .
• The electric pump with a high impedance windi ng avoids its burning in normal conditions of use and certainly
that it is always covered with water.
4
2.1 PICTOGRAMS
The pictograms on the machine have the following meaning:
• USE SAFETY BOO T S
• USE HELMET AND EYE AND AUDITIVE PROTECTION
• READ INSTRUCTIONS MANUAL
• USE SAFETY GLO VES.
• SOUND POWER LEVEL ISSUED BY THE MACHINE• .
SOUND POWER LEVEL ISSUED BY THE MACHINE .
Machine connected a 110V.
ENGLISH
Machine connected a 230V.
Machine connected a 400V.
Hot surfaces.
Entry not allowed to persons outside the labor. Warning c utting to ol..
Cutting depth adjust.
Anti tip mechanism for sliding tray.
5
3. TRANSPORTATION
After unpacking the machine, it can be move it into the work place manually by two people.
It is recommended to empty the water from the tray before moving the machine to avoid splashing or
spillage. It is also necessary to block the car to avoid unexpected slip during transport. Check also that they are fully
tightened the screws holding the legs to the tray to avoid dislodging the raising machine.
.
ENGLISH
4. ELECTRICAL PLUGGING AND ADJUSTING THE BLADE ROTATION SENSE
Upon receipt of the machine, make sure the network elec trical tension is adeq uate before plug ging the machine. The
electrical tension is to be found on the voltage indi c ation next to the switch of the machine.
Once you have realised the previous step s and before placing the blade and manipulate the motor, it is necessary to
check and adjust the r otation of the mo tor axis corre ctly, you have to p lug the machine to the e lectricity and s tart it
up, watching the rotation direction that must be c lockw is e .
If necessary and with thr ee-phase moto rs, you c an change the ro tation dir ection sw apping the tw o phase wires in the
aerial or in the peg of the feeding extension cord.
WARNING: Never manipulate power supply cables or any other electrical
equipment on the machine before you unplug the machine from ele c tricity.
WARNING: U nplug the mac hine from the network before pro ceeding to change the
position of the bridge plates on the engines. Yo u should also proceed to change the
stickers indicating the supply voltage, so ther e will always be indicated on the
machine rated voltage .
6
Loading...