Sim2 Multimedia SDM40-D500 User Manual

Key Points

- 40 (>101cm) wide screen high brightness LCD monitor for professional
picture monitoring

- Advanced TFT LCD panel

- True 16:9 aspect ratio

- WXGA resolution: 3,147,264 pixels (1366x768x3)

- Superior image quality enhanced by 800:1 contrast ratio

- Wide 170° viewing angle (up/down; left/right) to increase readability

- Extensive connectivity allows simultaneous connectioncs of multiple sources

- High brightness >600 cd/mq, for a superb picture performance

- Long life lamp

- Slim, thin and lightweight

SDM40-D500

The SDM40-D500 is a 16:9 aspect ratio, low-reflection and wide viewing angles large screen 40" monitor, suitable for control rooms,
briefing and training rooms, teleconference, boardrooms, surveillance, commercial applications, hotel lobbies and visual messaging
information points.

Image quality

Featuring the latest TFT panel technology, the SDM40-D500 combines state-of-the-art technology and stylish compact design. The
SDM40-D500 is a professional high definition display - burn-in free- designed to deliver bright and high contrast images, excellent colorimetry
and gray level rendering. With a brightness of 600 cd/m2, this monitor delivers sharp vivid pictures even in direct sunlight conditions. The
variety of different available analog and DVI inputs allows the SDM40-D500 to be effectively used both for graphic data and video imaging
display.

Reliability

Long-life backlight (60.000 hours) ensures reliable operation in continuous applications. Low heat dissipation decreases chances of
component failure.

Easy Installation

With a reduced depth of 10,2cm and a lightweight (45Kg), the SDM40-D500 is easy to install while its sleek profile is ideal for presti­gious environments. The image alignment is easily controlled electronically via remote control handset, which allows you to perfectly
adapt the image on the screen.

Versatile Image Control

DVI inputs provide digital quality for a professional connectivity. In a chain of monitors, DVI loop-through allows feeding from the same
source for a distributed visualization system.
The internal image processing and resizing capabilities of the SDM40-D500 can be effectively exploited to display different source
image resolutions from VGA to UXGA. Besides IR remote control, the continuous monitoring and control of the videowall operating para­meters during operations is achieved through a serial protocol-based control software via RS485/232 connection. For display opera­tions, the SDM40-D500 can easily be connected to an external image controller for multiple input windows managing. The default adju­stments can be stored in specific memory locations that can be easily accessed by the user.

Maintenance

The SDM40-D500 has been designed with special attention in minimize maintenance operations. Dust removal is the only routine
operation to be easily done from time to time.

Technical specifications

Projection System

LCD Panel latest generation TFT LCD
Resolution Wide XGA (1366x768)
Aspect Ratio (W:H) 16:9, Anamorphic, Letter Box, Panoramic, Pixel to Pixel + 3 custom-user

adjustments
Screen brightness 600 cd/m2
Viewing Angle 170°
Screen contrast ratio >800:1
Response time Typical 8ms
Color Temperature 3 Preset
Screen size Diagonal size 40”
Lamp life time 60.000 hours* in standard conditions

Electronics

Horizontal Frequency 15KHz-110KHz
Vertical Frequency 48 Hz - 120 Hz
Analog Bandwidth 170 MHz @ -3dB for graphic signals; 8 MHz @ -2dB for Video Signals
Graphic Standards from VGA (640x480) to UXGA (1600x1200) with internal scaling
Video Standard automatic recognition and decoding: PAL, NTSC, SECAM

internal motion-adaptive deinterlacing

Input signals

Graphic Inputs 2 x RGB+HV (or YPrPb) on D-sub HD15 connectors
Video Inputs 1 x CVBS1 in on BNC connector

1 x S-VIDEO (in/out) on mini DIN
DVI Input / Output Analog RGBHV (or YPrPb) + Digital RGB (in/out)
Control Interface 1xRS485 (in/out)

1xRS232USB in

1xUSB 1.1. in

Electrical Data

Main Power Supply 100 Vac - 240 Vac +/- 10%; Line Frequency 48 - 62 Hz
Power Consumption Max 185 W (160 Kcal/h)
Fuse T 3.15A H 5x20mm

SDM40-D500

Headquarters:

SIM2 MULTIMEDIA S.p.A.

Viale Lino Zanussi 11

33170 Pordenone - Italy

Tel. [phone]

Fax. [phone]

email:[e-mail]

www.sim2.com

USA:

SIM2 SELECO USA Inc.

10108 USA Today Way

33025 Miramar FL - USA

Tel. +1.954.442 2999

Fax. +1.954.442 2998

email: [e-mail]

www.sim2usa.com

Germany:

SIM2 DEUTSCHLAND GmbH

Gewerbepark, 17

35606 Solms - Germany

Tel. [phone]

Fax. [phone]

email: [e-mail]

www.sim2.com

Mechanical Data

Cabinet Dimensions 1106 x 652 x 102 mm (WxHxD)
Net weight 45 Kg.

Environmental Data

Exhaust Air 48 °C (@ 35°C environment)
Operating Ambient Temperature from 0° to +35°C
Storage and Transportation from -10°C to +55°C
Humidity from 10% HR to 90% HR (without condensation)
Max Altitude Operating 4000m

Storage 11000m

Safety and Rgulatory Data

Drop Test in compliance with UNI EN 22247 and 22248
Safety in compliance with EN 60950, UL60950
EMC emission in compliance with EN 55022, EN61000-3-2/3
EMC immunity in compliance with EN 55024, EN61000-4-2/3/4/5/6/8/11, ENV50204

Accessories

Easywall 3 PC based control software suite
RC 2000 Remote Control Handset p/n 790010000
Ethernet box
Base
Installation and user manual

(*) Lamp life: the hours have been calculated under strict test conditions. Misuse or improper operating conditions may alter it.

Due to constant product development, specifications and design might be subject to change without notice. SDM40-D500- World - January 2005

SIM2 UK Ltd.

UK:

Steinway House

Worth Farm

Little Horsted

Nr. Uckfield

East Sussex TN22 5TT

Tel:[phone]

Fax:[phone]

www.sim2.co.uk

SIM2 Multimedia is certified