SILYNX KEY FOB PTT User Manual

PTT B

CLARUS

instructions

SEP 2015

KEY FOB PTT

User Guide - Pairing

PTT A

Key FOB PTT

PTT B

1. Power on CLARUS (Press and hold (+) for 5 sec).

2. Press PTT B quickly 5 times.

3. A slow beeping tone heard in the headset indicates the
CLARUS is in pairing mode. (As the pairing time runs out the
beeping will speed up)

4. Position the Key Fob PTT close to the CLARUS.

5. Press all three buttons on the Key Fob PTT (“lock”,
“unlock”, and “panic”) at the same time.

6. A short rapid beeping confirmation tone will indicate a

Note: Pairing must occur within 60 sec after powering on the
CLARUS

*Information subject to change without notice

1.866.325.1731 | [e-mail] | [e-mail]

www.silynxcom.com | 9901 Belward Campus Drive Suite 150 Rockville, MD 20850

SMART PHONE CABLE

PTT B

PTT A

Connected Directly to the CLARUS

1. Hold PTT A to transmit

2. Press PTT B to Answer / End calls

PTT B

SEP 2015

User Guide

PTT A

Primary Lead

Connected to Dual Comms Splitter (Primary Lead)

1. Hold PTT A to transmit

2. Tap PTT A to Answer / End calls

PTT B

PTT A

Secondary Lead

Connected to Dual Comms Splitter (Secondary Lead)

1. Hold PTT B to transmit

2. Tap PTT B to Answer / End calls

*Information subject to change without notice

1.866.325.1731 | [e-mail] | [e-mail]

www.silynxcom.com | 9901 Belward Campus Drive Suite 150 Rockville, MD 20850