SilverStone TEMJIN 5, SST-TJ05 User Manual

Material: Aluminum Front Panel 0.8 SECC Body
Motherboards: Extended ATX / Standard ATX or Micro ATX
Color: Silver
Drive Bay: (Exposed)5.25" x 4 and 3.5" x 2
(Hidden) 3.5" x 8
Cooling: Front 120 x 120 x 25mm x 2(2200rpm)21dBA (lntake)
Rear 120 x 120 x 25mm (2200rpm)21dBA (Exhaust)
Left side 80mm x 80mm fan (option) x 2
Right side 80mm x 80mm fan (option) x 1
Expansion Slots: 7
Power Supply: Optional Standard PS2 Power Supply
and Redundant PS2 Power Supply
Additional: USB 2.0 ports x 4, IEEE1394 x1 Earphone jack x 1,MIC x 1
Net Weight: 7 kg
Dimension: 590mm ( D ) x 502mm ( W ) x 200mm ( H )
Package: 680mm ( D ) x 543mm ( W ) x 285mm ( H )

I

ncluded:

SST-TJ05

A VIEW

8025FAN
MESH

SIDE
IO

(1394+USB+MIC+SP

A

POWER SW

DOOR

LCD

3.5BAY*2

DOOR

3.5BAY*2
OR 8025FAN*2

3.5BAY*5(HIDDEN)

8025FAN

SIDE PANEL

POWER

5.25BAY*4

12025FAN

12025FAN

5

M3X5 Pan/Washer Screw x 8pcs

4.75HX6.5X4-#6 Stand-off 12pcs

3.5X8X0.5R Washer x 12pcs
#6-32 X 9Pan Screw x 8pcs
#6-32 X 6Hexagon Screw x 2pcs
#6-32 X 4.7Pan Screw x 15pcs

This is unique design product, please read this installation
guide carefully which we prepared for you meticulously

Step 1: Remove side panel.

Unscrew thumbscrews on the rear panel
of the side panel.

Unlock plastic clips by pushing either
up or down.

Remove right side panel by pulling it
backward.

Remove the utility tray.

Place the motherboard on top to the
stand-offs and secure it by
using #6-32 screws.

Press down on the white tab located on top and
slide out the entire 3.5" drive bracket.

Remove thumb screw on the bottom of
the 3.5" drive bracket.

Fasten the power supply to the case with screws.

Re-install the 3.5" drive bracket and
secure it with thumb screw.

Remove screws holding the 5.25" drive
bay cover.

Open the tool box to access drive rails.

Insert the power supply into the power
supply compartment as shown.

Remove 5.25" drive bay cover.

Insert 5.25" drive rail to your optical drive.

Insert the drive into 5.25" drive bay

Remove 3.5" drive bay cover.

Screw the stand-offs onto the holes of
the motherboard tray.

Slide your hard drive into the 3.5" drive bracket.

Step 2: Install motherboard

Turn the case to the position as shown
on Above picture,and prepare
motherboard for Installation..

Step 4: Install Floppy Drive,
Hard Drive and optical Drive.

Insert hard drive rails to your hard drive.

Remove screws holding the 3.5" drive
bay cover.

Step 3: Install power supply

Utility tray: install additional hard drive or 80x25mm fan.

Install into external 3.5" drive bay.

Insert external 3.5" drive rail to your floppy drive.

You have finished installation.