SUGO
Refinement of classic small form factor case
Introduction
SilverStone’s Sugo series, since its introduction in 2005, has been the de facto standard for which retail small form factor cases are defined. The introduction of SG12 is both a tribute
and advancement to one of the most revered case designs within SilverStone product portfolio, the Sugo SG01. With classic shoebox proportion maintained, the SG12 continues to
impress with its ability to accommodate many standard sized components such as ATX power supply and room for graphics cards up to 14.5 inches. For cooling, side intake fan size
has been upgraded to 120mm from 80mm to help cope with future hardware demands. For storage, redesigned internal layout allows for installation of up to nine 2.5” drives. Finished
with an aluminum front panel with built-in handle bar, the SG12 is an excellent case for anyone looking to build a semi-portable, compact workstation or a powerful, yet small gaming
system.
Feature Photos
SG12
Built-in handle bar design
for easy transport
Support graphics cards
of any length
Ample space for CPU
cooling (82mm in height)
Micro A TX motherboard
& ATX PSU compatible
Specifications
Model
Material
Motherboard
Drive Bay
Cooling System
* Fan and drive cage configuration will affect graphics card length support, please refer to manual for detailed information.
SST-SG12B (black)
Aluminum front panel, steel body
Micro ATX, Mini-DTX, Mini-ITX
Exposed
Internal
Rear
Side
Top
5.25” x 1
3.5" x 3 (compatible with 2.5”), 2.5” x 9
1 x 80mm fan slot, Optional cross-flow fan
1 x 120mm intake fan, 1200rpm
1 x 80mm fan slot
Expansion Slot
Front I/O Port
Power Supply
Expansion Card
Limitation of CPU cooler
Limitation of PSU
Dimension
Cleanly styled SFF chassis
with modernized layout
4
USB3.0 x 2, Audio x 1, MIC x 1
Optional standard PS2(ATX)
*Support graphics card up to 14.5”, width restriction-4.46"
82mm
PSU + optical drive/5.25” device = 370mm
266 mm (W) x 210 mm (H) x 407 mm (D), 22.7 liters
Amazing capacity
for 2.5” drives