SilverStone SST-ECU03 User Manual
Expansion Cards
s
3
USB 3.1 expansion card with external Type A and Type C connector
ECU03
CU0
Installation and system optimization guide:
The following manual and guides were carefully prepared by the SilverStone engineering team to
help you maximize the potential of your SilverStone product. Please keep this manual for future
reference when upgrading or performing maintenance on your system. A copy of this manual can also
be downloaded from our website at:
Product Overview
Installation Guide
Attention
Warranty Information
P.1
P.2
P.5
P.7
Expansion Cards ECU03
l
l
Product Overview
Introduction
The SilverStone ECU03 is a USB 3.1 expansion card with external
Type A and Type C connector. It offers 10Gbps bandwidth for
excellent stability and transfer rate when multiple external USB
devices are in use simultaneously. The ECU03 is also backwards
compatible with USB 3.0/2.0/1.1 and supports UASP (USB Attached
SCSI Protocol) for enhanced performance. For operating systems
with XHCI (eXtensible Host Controller Interface), the ECU03 will
easily install without the need for any drivers because it also supports
XHCI. For those looking to upgrade or add additional USB 3.1 ports
or devices to their computer, the ECU03 is a great starting point.
Features
SuperSpeed USB 3.1 with Type A and Type C ports
PCI-E Gen2.0 x2, throughput up to 10Gbps
Compliant with eXtensible Host Controller Interface (XHCI) specification Revision 1.1
Compliant with USB Attached SCSI Protocol Revision 1.0 (UASP)
Includes optional low profile slot cover for supporting low profile cases
Specifications
Model No.
Power requirement
Form Factor
USB 3.1 controller
USB Ports
Transmitting Speed
Operating system support
Power Management
Current protection
* If your OS version is Windows 7 or earlier, please install driver (available from SilverStone website) prior to using the ECU03.
** Windows 8 or 8.1, 10 supports ECU03 automatically so you do not need to install additional driver for it.
*** User should check for XHCI function in Ubuntu/Linux or Mac OS, if computer system supports XHCI function then it can support ECU03 automatically
without additional driver installation.
SST-ECU03
5V via SATA 15-pin power connector
Low profile - PCI-E 2.0 x2 (10Gbps)
ASMedia ASM1142
USB 3.1 Type A x 1
USB 3.1 Type C x 1, DFP with Rp=10KΩ and up to 5V 3A
USB 3.1 Gen2 (10Gbps), USB 3.1 Gen1/USB 3.0 (5Gbps), USB 2.0 (480Mbps), USB 1.1 (12Mbps)
Windows 7 (32bit/64bit)*, 8/8.1/10(32bit/64bit)**, Ubuntu/Linux/Mac OS***
Support USB 3.1 and USB 2.0 link power management
Support over current detection and protection
1
Expansion Cards ECU03
Installation Guide
01
Install ECU03 into PCI-E slot on the motherboard.
Installieren Sie die ECU03 im PCI-E-Steckplatz am Motherboard.
Installez l'ECU03 dans l'emplacement PCI-E de la carte mère.
Instale el ECU03 en el zócalo PCI-E de la placa base.
Installare ECU03 nell’alloggio PCI-E sulla scheda madre.
Установите карту ECU03 в слот PCI-E на системной плате.
將ECU03 安裝於主機板上的PCI-E插槽。
将ECU03 安装于主板上的PCI-E插槽。
マザーボードのPCI-EスロットにECU03をインストールします。
메인보드의 PCI-E 슬롯에 ECU03를 설치합니다.
2
Loading...