SilverStone SST-CS330B User Manual
Advanced tower chassis with
three 3.5" SAS-12G** / SATA6 Gbit/s hot-swap bays
CS330
• Supports three 3.5" SAS / SATA hard drives and speed up to 12 Gbit/s** with tray-less and screw-less design
• Supports one 2.5" hard drive and up to eight 3.5" hard drives
• Adjustable LED hard drive indicator and fan speed
• One 180mm Air Penetrator fan included for excellent system cooling
• Removable motherboard tray and top panel design
• Easily removable lters
• Abundant cable management space behind motherboard tray
• Includes custom CPU cooler supporter
Specications
Model No.
Material
Motherboard
Drive bay
Cooling System
Radiator Support
Expansion Slot
Front I/O Port
Power Supply
Expansion card
Limitation of CPU cooler
Limitation of PSU depth
Net Weight
Dimension
Other
Hot Swap 3.5" HDD Storage
Transfer rate
Host interface
Power connector
LED indicator
Drive tray security
Switch button
*Please install into expansion slots 3 and 4 for interface card with extension bracket and length of 13.3"
*Your system must have SAS controller if you want to use SAS HDD
*Hard drive capacity and RAID support is dependent on SAS or SATA controller used
**12Gbit/s Mini-SAS HD control card and cable required for 12Gb/s performance. (e.g. SilverStone ECS05 & CPS05)
SST-CS330B
Aluminum front panel, steel body
Micro-ATX, Mini-DTX, Mini-ITX
External
Internal
Front
Rear
Rear
4
USB 3.0 x 2 (compatible with USB 2.0), Audio x 1, MIC x 1
Standard PS2(ATX) up to 160mm
Support graphics card up to 13.25" (336mm), width restriction 6.69" (169mm)*
165mm
160mm
6.05kg
210mm (W) x 374mm (H) x 385mm (D), 30.2 liters
8.27" (W) x 14.72" (H) x 15.16" (D), 30.2 liters
Support Kensington lock
Up to 12 Gbit/s** (depends on HDD / SSD speed)
7pin SATA connector x 3
SATA 15pin connector x 2
Power ON: Blue
Accessing: Purple blinking
Triangle metal key lock design
Fan speed: High / Low
HDD LED: ON / OFF
3.5" SAS/SATA x 3
3.5" x 1 or Internal 2.5" x 1
3.5" x 4, 2.5" x 1 or external 3.5" x 1
180mm x 1(180mm x 1 AP181 fan included, 700/1200RPM 18/34dBA)
120mm x 1(Option)
120mm
www.silverstonetek.com
Removable motherboard tray
and top panel design
Ease the process of installing, upgrading or
removing parts simply by removing the top panel
and motherboard tray.
Cooling
One 180mm Air Penetrator fan included and mount for a
120mm fan at the rear for excellent front-to-back directional
system cooling.
Superior dust prevention
Dust lter on top and front assist in preventing performance
degradation caused by dust accumulation over time.
Integrated CPU cooler supporter
Adjustable CPU cooler supporter helps to distribute the weight of CPU coolers o the motherboard, preventing
socket damage to the motherboard.
www.silverstonetek.com
Loading...