SilverStone SST-AR01-V2.1 User Manual

Warranty Information

This product has a limited 1 year warranty in North America, Europe, and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.

Warranty terms & conditions

1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty.

2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding
shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.

3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone
Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of
profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,
contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.

4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand
purchaser.

5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.

6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone
http://www.silverstonetek.com.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping
(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping
(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a
Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website.
Please visit http://www.silverstonetek.com for the latest updates.

Additional info & contacts

For North America ([e-mail])
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested. Replacement product will be warranted for remainder
of the warranty period or thirty days, whichever is longer. All power supplies should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA
procedure with SilverStone Technology in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions.

http://silverstonetek.com/contactus.php

For Australia only ([e-mail])

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above “Warranty terms & conditions” for further warranty details.

SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238
(standard international call charges apply)

For Europe ([e-mail])
For all other regions ([e-mail])

Advanced heatsink with Heat-pipe Direct Contact (HDC) technology

Great balance of silence and performance

Three Ø8mm heat-pipes and aluminum fins for excellent heat conducting efficiency

Heat-pipe direct contact (H.D.C.) technology

Innovative anti-vibration fan mountings for easy installation and silent operation

Includes compact 120mm PWM fan for excellent cooling and low noise

Intel Socket LGA775/1150/1155/1156/1366/2011/2066 and AMD Socket AM2/AM3/ AM4/

FM1/FM2 compatible

AR01-V2.1

散熱系統 有毒有害物质/元素及其化学含量表

部件名称

螺絲

風扇

支架(SPCC)

螺柱

鰭片

熱管

支架(SUS304)

墊圈

導熱膏

○：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11364-2014
标准规定的限量要求以下。
×：表示该有毒有害物质在该部件材料中的含量超出SJ/T11364-2014标准规定
的限量要求。

本表中有×的部件均符合欧盟RoHS法规，即欧盟第2011/65/EU号指令要求。

铅

(Pb)

○

Χ

○

○

○

○

○

○

○

(Hg)

汞

○

○

○

○

○

○

○

○

○

镉

(Cd)

○

○

○

○

○

○

○

○

○

六价铬

(Cr(VI))

○

○

○

○

○

○

○

○

○

多溴联苯

(PBB)

○

○

○

○

○

○

○

○

○

产品合格证

检验员：检01
生产日期：见产品条码

NO.G11233290

多溴二苯醚

(PBDE)

○

○

○

○

○

○

○

○

○

Model No.

Material

Application

Heat Pipe Type

Cooling System

Noise level

Bearing Type

Max airflow

Pressure

Rated Voltage

Rated Current

Life Expectance

Speed

Dimension

Net Weight

SST-AR01-V2.1

Copper heat pipes with aluminum fins

Intel Socket LGA775/1150/1151/1155/1156/1366/2011/2066

AMD Socket AM2/AM3/AM4/FM1/FM2

Ø8mm heat-pipe x 3

120mm x 120mm x 25mm fan

18 ~ 35 dBA

Long-Life sleeve bearing

92.5CFM

3.5mm/H2O

12V

0.3A

40,000 hours

1500 ~ 2500RPM

120mm (W) x 50mm (D) x 159mm (H) (with out fan)

420g (with out fan)

Installation Guide

Package Contents

A

A

B

C

D

E

F

G

H

I

J

K

L

M

Back Plate

Washer

LGA115X Standoff

LGA2011 Standoff

AM4 Standoff

Thumb Nut

Hexagon Nut

INTEL Clip

AMD Clip

Rubber Rivet

Thermal Grease

Crossbar

Hexagon Handle

AM3/FM2

LGA1155/1156

AM2 & AM3

Intel

AMD

LGA755

C

B

A

L

F

H

D

LGA115X

G

L

F

H

C

B

A

AM4

LGA2011&2066

G

G

F

L

I

E

B

Fan mounting

將塑膠防震墊片固定到風扇上

6

1

将塑料防震垫片固定到风扇上

Secure the anti-vibration rubber mounting onto the fan

Vibrationsdämpfende Gummifassung am Lüfter befestigen

Fije la goma anti vibración en el ventilador

Fixez le caoutchouc de montage anti vibrations sur le ventilateur

Fissare la gomma anti-vibrazione sulla ventola

G

F

L

I

防振ゴムパッドをファンに取り付けます

팬 위에 장착되는 방진 고무를 고정합니다

Закрепите антивибрационное крепление на вентиляторе

將風扇的塑膠防震墊片坎入散熱片中

2

将风扇的塑料防震垫片坎入散热片中

Secure the anti-vibration rubber mounting into the heatsink’s fins

Vibrationsdämpfende Gummifassung an den Lamellen des Kühlkörpers befestigen

Fije la goma anti vibración a las aletas del disipador

Fixez le caoutchouc de montage anti vibrations sur les ailettes du dissipateur

Fissare l’attacco gomma anti-vibrazione sulle alette del dissipatore

防振ゴムパッドをヒートシンクのフィンに取り付けます

방열판의 핀에 장착되는 방진 고무를 고정합니다

Закрепите антивибрационное крепление на ребрах радиатора