SilverStone RL01 User Manual

During warranty period, assistance for replacement or exchange of defective components is available
at the place of purchase with receipt or valid proof of purchase. The warranty does not cover repair or
exchange of product resulting from misuse, accident, modification, unsuitable physical or operating
environment, improper maintenance, or failure caused by non-SilverStone product. The warranty is
voided by removal or alteration of product or parts identification labels.

Warranty period is region specific, please contact your reseller or SilverStone authorized distributor for
more information.

This instruction will help you make the most out of your product. Please read through it before installation.
Also, please keep your product receipt and this instruction in safe place for future reference.

We, SilverStone Technology, hope you will enjoy your product.
If you have any comments or suggestions, please e-mail to
Thank you for choosing and supporting our product.

Issue date: March, 2012

NO: G11215610

[e-mail]

Specifications

Material
Model

Motherboard
Drive Bay

Cooling System

Expansion Slot
Front I/O Port

Power Supply
Expansion Card
Limitation of CPU cooler
Dimension

RL01

REDLINE SERIES

Special Features

Fantastic styling details with glowing button and red LED fan
Positive pressure design for effective dust reduction
Removable magnetic dust filter for top and bottom vents
Smart backside cable routing design
Motherboard back plate opening for quick CPU cooler assembly
Support easy access drive bays with tool-less design

High-strength plastic and meshed front panel
SST-RL01B-USB 2.0, SST-RL01B-W-USB 2.0
SST-RL01B-USB 3.0, SST-RL01B-W-USB 3.0
ATX, Micro ATX
Exposed
Internal
Front
Rear
Top
Bottom
7
USB 2.0 x 2 (SST-RL01B-USB 2.0+SST-RL01B-W-USB 2.0 only)
USB 3.0 x 2 (SST-RL01B-USB 3.0+SST-RL01B-W-USB 3.0 only)
Audio x 1, MIC x 1
1 x optional standard PS2 (ATX)
Compatible with expansion cards up to 11”
155mm

192.5mm (W) x 440.3mm (H) x 485mm (D)

5.25" x 3, 3.5” x 1

3.5" x 5, 2.5” x 1
1 x 120mm red LED intake fan
1 x 120mm fan slot
2 x 120mm or 1 x 120mm and 1 x 140mm fan slots
1 x 120mm fan slot