SilverStone PT12B User Manual

Loosen two screws from the rear of the
chassis then remove the top cover.

1.

Loosen four screws from the bottom
of the chassis then remove the ODD
bracket.

Super slim thin Mini-ITX chassis

PT12B

2.

Loosen three screws from the side to
remove ODD panel

3.

Install the ODD drive and secure with
screws

4.

L

oose

n two screws from the rear of t

he

1.

L

oose

n four screws from the bottom

Super slim thin Mini-ITX chassis

2.

G11217540

Install the ODD bracket back into the
chassis and secure with screws.

5.

Loosen four screws from the bottom
of the chassis then remove the 2.5” SSD
hard drive bracket.

6.

Install the 2.5” SSD hard drive and
secure with screws

7.

Install the 2.5” SSD hard drive bracket
back into the chassis and secure with
screws.

8.

Install the I/O shield included with
your motherboard.

9.

Install the motherboard together with the
CPU cooler into the case and secure with
screws.

10.

Install the PT12’s VESA bracket onto
the VESA back plate on the monitor
from the top.

2.

Secure VESA mounting with two
screws. Installation complete

3.

Secure the CPU cooler with two screws.

11.

Install the CPU fan into the case
and secure with two screws.

12.

Place the top cover back onto the case
and secure with screws.

VESA Mounting

13.

Secure the VESA back plate onto the
back of the monitor with four screws.

1.