SilverStone PS15 User manual

Download

Page 1

Affordable and compact Micro -ATX cha ssis

with outstanding cooling potential

PS15

Affordable and compact Micro-ATX chassis

with outstanding cooling potential

Page 2

DISASSEMBLE CHART

2.5" BAY X2

12025 FAN X2 (OPTION) 14025 FAN X2 (OPTION)

FILTER

12025 FAN X1

MICRO ATX M/B (OPTION) MINI ITX M/B (OPTION)

PS2 PSU (OPTION)

2.5" BAY X1 AND

3.5" BAY X1

POWER S / W

FILTER

RIGHT SIDE PANEL

12025 FAN X2 (OPTION) 14025 FAN X2 (OPTION)

USB 3.0 X2 + MIC + SPK + HDD LED

LEFT SIDE GLASS PANEL

ITEM PURPOSE

STANDOFF-M3 X 6.5H-632 X 4.75-BK

SCREW-PAN- 4 X 2.8H-M3 X 3-BK

SSD-RUBBER

SCREW-HW-6-32 X 6-BK

SCREW-PW-M3 X 6-BK

BUNCH WIRE TIES

PANEL

Secure motherboard

Secure SSD

Cushion SSD with screw

Secure PSU / expansion cards

Secure SSD / motherboard

Cable management

Page 3

2.5" / 3.5" DRIVE INST ALLATION GUIDE

Install the 3.5"/2.5" hard drive into the 3.5” drive bracket,

and then slide the whole 3.5” bracket into the chassis.

Install 2.5” drive screws and anti-vibration pads onto the

bottom of 2.5” drive, and then install the assembled drive on top of the 3.5” drive bracket or on the motherboard bracket.

Page 4

COMPONENT SIZE LIMITATIONS

he PS15 was designed to accommodate oversized

components, but we still recommend referring to the following

dimension guidelines:

(1) CPU Cooler limitation

154mm

25mm

Height limitation for CPU cooler is 154mm with 25mm clearance

over the motherboard’s top edge, and if there is still fan installation

over the motherboard; please ensure to take the thickness of fan

installation within the cooler height limitation.

(2) Power supply limitation

Micro ATX M

Mini ITX I

150mm 30mm

The PS15 supports power supply with depth of up to 150mm.

Page 5

(3) Graphics card / expansion card length limitation

314mm

PS15 can support 12.3" (314mm) graphics cards

Page 6

LIQUID COOLER RADIATOR SUPPORT

The rear fan slot supports one 120mm radiator.

The 41mm of clearance from the right edge of fan slot is

to the motherboard surface.

If you wish to install a radiator in this position, please

ensure motherboard components do not interfere with it.

41mm

The front fan slots support 120mm or 240mm radiators.

The total length limitation for radiator in this area is 310mm.

Graphics card length support will vary depending on the

thickness of the radiator used.

Micro ATX M

Mini ITX I

310mm

Page 7

WARRANTY

All SilverStone retail products have from the date of

purchase, a minimum of 1 year limited warranty (select products

listed below have 2, 3 or 5 year warranty)

WARRANTY TERMS & CONDITIONS

1. Product component defects or damages resulted from defective

production is covered under warranty.

Defects or damages with the following conditions will be fixed

or replaced under SilverStone Technology’s jurisdiction.

a) Usage in accordance with instructions provided in this manual,

with no misuse, overuse, or other inappropriate actions.

b) Damage not caused by natural disaster (thunder, fire, earthquake,

flood, salt, wind, insect, animals, etc…)

c) Product is not disassembled, modified, or fixed. Components

not disassembled or replaced.

d) Warranty mark/stickers are not removed or broken. Loss or

damages resulted from conditions other than ones listed above

are not covered under warranty.

2. Under warranty, SilverStone Technology’s maximum liability is

limited to the current market value for the product (depreciated

value, excluding shipping, handling, and other fees). SilverStone

Technology is not responsible for other damages or loss

associated with the use of product.

3. Under warranty, SilverStone Technology is obligated to repair

or replace its defective products. Under no circumstances will

SilverStone Technology be liable for damages in connection

with the sale, purchase, or use including but not limited to loss

of data, loss of business, loss of profits, loss of use of the product

or incidental or consequential damage whether or not foreseeable

and whether or not based on breach of warranty, contract or

negligence, even if SilverStone Technology has been advised

of the possibility of such damages.

Page 8

4. Warranty covers only the original purchaser through authorized

SilverStone distributors and resellers and is not transferable to a second hand purchaser.

5. You must provide sales receipt or invoice with clear indication

of purchase date to determine warranty eligibility.

6. If a problem develops during the warranty period, please

contact your retailer/reseller/SilverStone authorized distributors or SilverStone http://www.silverstonetek.com. Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt (ii) You shall bear the cost of shipping (or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service (iii) Before you send the product, you must be issued a Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website. Please visit http://www.silverstonetek.com for the latest updates.

Page 9

ADDITIONAL INFO & CONTACTS

For North America ([email protected])

SilverStone Technology in North America may repair or replace

defective product with refurbished product that is not new but has

been functionally tested. Replacement product will be warranted

for remainder of the warranty period or thirty days, whichever is

longer. All products should be sent back to the place of purchase

if it is within 30 days of purchase, after 30 days, customers need

to initiate RMA procedure with SilverStone Technology in USA by

first downloading the “USA RMA form for end-users” form from

the below link and follow its instructions.

http://silverstonetek.com/contactus.php

For Australia only ([email protected])

Our goods come with guarantees that cannot be excluded under

the Australian Consumer Law. You are entitled to a replacement

or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to

have the goods repaired or replaced if the goods fail to be of

acceptable quality and the failure does not amount to a major

failure. Please refer to above “Warranty terms & conditions” for

further warranty details.

SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd.,

Zhonghe Dist., New Taipei City 235 Taiwan R.O.C.

+ 886-2-8228-1238 (standard international call charges apply)

For Europe support.eu(at)silverstonetek.de

For China support(at)silverstonetek.com.cn

For Japan support_jp(at)silverstonetek.co.jp

For all other regions support(at)silverstonetek.com

Page 10

ALL trademarks are registered to their respective owners