M
MARTIAN
MARTIAN NOTIFIER
QUICK CONNECT GUIDE
Complete User Manual is available at martiannotifier.com/manual
v1
Congratulations on the purchase of your new Martian Notifier smartwatch!!
Our goal at Martian Watches is to deliver an outstanding product to make
Life on Earth more convenient when used as a companion to your Smartphone.
Enjoy!
Getting Started
Make sure these items
are in the box:
MARTIAN NOTIFIER
Micro-USB cable
Setting the Time
Gently pull out the watch crown (knob on right side of watch) and rotate it to
set the time. When set, push the crown back in until you hear a click.
Tu rn in g Yo ur Wa t ch O n
Press and hold Bottom Left Button for 2 seconds.
Turning Your Watch Off
Press and hold Bottom Left Button for 2 seconds.
Controls and Displays
There are Two Buttons on your watch… top left and bottom left. The
watch crown, on the right, is used only to set the time and is not a button.
The watch glass also functions as a button for some features.
1. Top Button
Launches voice commands (and dismisses them on iOS), accepts
changes made in Martian Menu, and scrolls notification history
forward.
2. Bottom Button
Tur ns wa tc h on an d of f, accesses status bar, scrolls through
Martian Menu, and scrolls notification history backward.
3. LED Indicator
Notifies users of events. Green: Incoming call and battery fully
charged. Red: Low battery or charging. Blue: Incoming
notification.
4. OLED Display
Shows incoming caller ID, text ID, and notifications. Displays
battery level and other information.
5. Watch Glass
Tap t o d i sm i s s i n co m i ng n ot i f ic a t i on s , d i s mi s s n o t if i c at i o n h i st o r y,
and recall last notification for up to 5 minutes after it was received.
Checking Battery Level
With the watch turned on, quick-press* the bottom left button to view the Watch
menu. The battery icon is in the far left of the display. If the white part of the icon
is less than 50%, your watch should be charged more fully before pairing.
Charging the Watch
The charging cable can be plugged into your computer’s USB port (or a power
outlet via a USB wall adapter, sold separately). Note: Martian Notifier requires
the special Micro USB cable included in the package*.
• A solid red light will appear when the watch is receiving power.
• A solid green light indicates the watch is fully charged.
Full charge is reached in approximately 2-3 hours from a power outlet,
3-4 hours when charging from a computer.
Battery Life - Martian Notifier allows 4-5 days of use time. The time piece will run
for approximately 2 years on its separate battery.
* For quick-press, press button(s) completely but quickly – for a fraction of a second.
Before Pairing Martian Notifier
• Turn “ON” Bluetooth on your smartphone or other device
For iOS : go to Settings > Bluetooth > Toggle On
For Android : go to Settings > Bluetooth > Toggle On
• Download the FREE Martian Notifier App for your device (App Store or Play Store)
• Android: Turn “ON” accessibility for Martian Notifier in your phone
(instructions!)
Un-Pairing Martian Notifier
You r MARTIAN Notifier can only be paired with one device at a time.
Once paired, if you wish to use your Watch with a different device, you need
to un-pair it from the current device before pairing with the next device.
For iOS : go to Set tings > Bl uetooth > Martian Not ifier > “Forg et Device”
For Andro id : go to S ettings > Bluetooth > Martian Notifier > “ Unpair”
Pairing to iOS Devices (iPhone, iPad and iPod)
Start-up is most easily accomplished in the following sequence:
On your Martian Notifier:
Tur n o n y o ur wa tc h ( long-press the bottom button). Before pairing, your watch
battery should be charged to at least 50%.
On your iOS Device:
1. Turn “ON” Bluetooth on your smartphone or other iOS device.
2. Download the Martian Notifier App (Go to the App Store; search for
“martian notifier”; Download “Martian Notifier” app to your device).
3. Open the app and go to the Home tab. Turn the “Tap to connect”
toggle button to “ON”.
4. After a moment, a 6-digit number will appear on your Martian. Type the
number into the field that pops up on your device and tap “Pair”.
5. If pairing is successful, “Paired to Smart” will appear on the watch’s
OLED, and “Watch and app are connected” will show on the App.
Note: If pairing is not successful, turn watch off and back on, turn your device’s
Bluetooth off and back on, then start again at item 3 above.
Pairing to Android Devices
Start-up is most easily accomplished in the following sequence:
On your Martian Notifier:
Tur n o n yo ur w a tc h (long-press the bottom button). Before pairing your watch,
battery should be charged to at least 50%.
On your Android Device:
1. Turn “ON” Bluetooth on your smartphone or other Android device.
2. Download the Martian Notifier App (Go to the Play Store; search for
“martian notifier”; download “Martian Notifier” app to your device).
3. Open the app and go to the Home tab. Tap the “Start” button.
4. A pop-up will appear that says “Please turn on Android in your
watch’s settings”.
(Continued on next page)
Pairing to Android Devices (cont.)
On your Martian Notifier:
Tur n o n “A nd ro id ” o n yo ur w a tc h.
• Quick-press the bottom button twice to access the Martian Menu.
• Quick-press the bottom button repeatedly until “Setup” appears.
• Quick-press the top button to enter the Setup menu.
• Quick-press the bottom button repeatedly until “Android” appears.
• Quick-press the top button to place a “checkmark” in the box.
The LED light will flash blue and the OLED displays “Pair from app”.
On your Android Device:
1. Tap “OK” to continue.
2. A pop-up will appear that says “Select a device to connect”.
Tap “scan for devices”.
3. A list of available devices will appear. Tap on “Martian Notifier”.
4. After a moment, a 6-digit number will appear on your Martian and on the
App. If the numbers match, tap “Pair”. If the numbers don’t match, tap
“Cancel” and tap “Start” to begin again.
5. If pairing is successful, “Paired to <your phone>” will appear on your
Martian Notifier’s OLED, and “Connected” will show on the App.
Support
Our complete User Manual is available at martiannotifier.com/manual
Visit MartianWatches.com/support to register your product, access the User
Manual, F.A.Q, watch Online Tutorial Videos, receive firmware update
notifications and contact us.
You ma y a ls o s e ar ch or po s t a q ue s ti o n at martianwatches.com/forum
* The micro USB connector on the cable that came with your Martian Notifier is longer than
most micro-USB cables. Shorter micro USB connectors will not work with your Martian Notifier;
however, this cable may be used for most other devices that use a micro USB connector for
charging purposes.
This guide is published by MARTIAN WATC HE S , without any warranty. Improvements
and changes to this guide necessitated by typographical errors, inaccuracies of
current information, or improvements to programs and/or equipment may be made by
MARTIAN WATC H ES at any time and without notice. Such changes will, however, be
incorporated into new editions of this guide. All rights reserved.
MartianWatches.com
Regulatory and Legal
©2013 Martian Watch, Martian Watches, Martian Notifier, Martian, the M logo, and Voice
Command Watch are trademarks of Martian Watches, 18 Technology, Suite 143,! Irvine, CA
92618. All rights reserved.
Product images are simulated and for instructional purposes only. They may differ from the
actual product and are subject to change without notice. Your use of Martian Watches is subject
to the Martian Watches Safety, Regulatory & Legal Terms located in the User Manual. The
Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by MARTIAN WATCH ES is under license. Other trademarks and
trade names are those of their respective owners.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory
has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has
been certified by the developer to meet Apple performance standards. Apple is not
responsib le for the op eration of thi s device or i ts compliance with safety a nd regulatory
standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect
wireless performance. iPod, iPad, iPhone and Siri are trademarks of Apple Inc., registered in
the U.S. and other countries.
Portions of this page are reproduced from work created and shared by the Android Open
Source Project and used according to terms described in the Creative Commons 2.5
Attribution License. Android is a trademark of Google Inc.
Loading...