!
V2
Complete User Manual is available at martianwatches.com/support
mVoice G2 QUICK CONNECT GUIDE
!
Charging the Watch
Plug the charging cable into your computer’s USB port (or a power outlet via a USB wall
adapter, sold separately). For the 1st charge, let the watch charge over night or until the green
LED light appears. To check the battery level, simply press the watch crown.
Warning: Due to the nature of the Lithium polymer rechargeable battery, a Martian Watches
lithium battery that is inactive for over one year may fall into a deep discharge state or could
cause the battery to permanently lose it's ability to charge. For long-term storage, please be
sure to charge and discharge your Martian Watch at least once every six months to prevent a
decrease in battery performance; store your Martian Watch in a dry place with low humidity and
at temperature range of 10 ℃ to 30℃, 50 to 90F; avoid exposure to temperatures higher than
!
Download mVoice G2 App
Go to App Store on your iPhone or Google Play Store on your Android
smartphone to download the Martian mVoice G2 app.
The Martian mVoice G2 app allows you to select the notifications you want,
vibration patterns, call features, silent alarms, world clock display, weather and
many other settings.
!
Turning Your Watch On / Off
Press and hold the Watch Crown for 5 seconds!
to turn On or Off your Martian G2.!
!
The OLED displays “MARTIAN” when it turns ON.!
The OLED displays “GOODBYE” when it turns OFF.
!
Pairing your Watch to iOS Devices
•
Go to Settings > Bluetooth and make sure Bluetooth is “On”.
On your iPhone
On your G2 Watch
• Enter pairing mode on the watch - short press the crown and scroll the
crown to Settings Face, short press the Crown to enter Settings. In the
Settings sub-menu, scroll the Crown until you see Pairing Mode, then
short press the Crown to Start pairing, a PIN code “xxxxxx” will appear
on the display of your watch and the LED will start flashing Blue. The
Watch must remain in Pairing Mode to be paired with your mobile
device, (Pairing Mode automatically times out after 30 seconds) If the
pairing process was not successful before Pairing Mode times out,
repeat this step to enter Pairing Mode again.
!
Pairing your Watch to iOS Devices
a. Go to Settings > Bluetooth; and look for “Martian mVoice G2” under
OTHER DEVICES. Tap on “Martian mVoice G2” to pair the Watch to
your iOS Mobile Device.
b. Accept “Bluetooth Pairing Request” - A pop-up window will appear on
your mobile device, telling you that Martian mVoice G2 would like to
pair with your mobile device; Tap “Pair” to complete the pairing
process. If the codes do not match, tap “Cancel” and try again. If the
pairing process is successful, the watch will vibrate and show “Paired
to [device name]”.
c. Connect to the Martian mVoice G2 App - Open the Martian mVoice
G2 App, and follow the instructions to pair “Martian Smart” with your
Mobile device. The Martian mVoice G2 App will search Martian
mVoice G2 watch automatically, and shows available list on the
Mobile device screen, select the mVoice G2 with same PIN code
shows on your watch to complete the pairing process.
On your iPhone
!
Pairing your Watch to iOS Devices
If this is the first time pairing your Watch to the App, the App will guide
you through the Setup Tutorial to help you personalize your Watch
settings step by step.
On your iPhone
!
Changing The Analog Time
With the Smart Analog Movement, the Martian mVoice G2 watch will
automatically sync with the timeframe your Mobile Device, including time
zone adjustment while you are traveling. If you want to adjust the analog
time, please go to Settings > Time Adjustment on your watch menu, and
follow the step-by-step instructions on the watch to adjust the analog
time.
Battery Life
The Smart analog Movement using the same rechargeable lithium battery
along with the rest of the smart components; however, the clock will still
run for approximately 60 days after the smart features battery use
allocation is depleted. As long as you charge your Watch within 60 days,
the analog clock hands will continue to show the current time.
!
Calibration
In the rare case that the analog watch time is not accurate or if your watch
battery has been completely depleted and the analog clock is no longer
running, you will need to calibrate the watch after you charge up your
watch. To calibrate the watch, please go to Settings > Calibration on your
watch menu, and follow the step-by-step instructions on the watch to
calibration your watch.
!
Support
Our Complete User Manual is available at martianwatches.com/support
Visit martianwatches.com/register to register your product, access the
User manual, F.A,Q, watch Online Tutorial Videos, receive firmware
update notification and contact us.
The guide is published by Martian Watches, without any warranty.
Improvements and changes to this guide necessitated by typographical
errors, inaccuracies of current information, or improvement to programs
and/or equipment may be made by Martian Watches at any time and
without notice. Such changes will, however, be incorporated into new
editions of this guide. All rights reserved.
!
Regulatory and Legal
©2018 Martian Watch, Martian Watches, Martian, the M logo, and Voice Command Watch are trademarks of Martian
Watches, 18 Technology, Suite 143,! Irvine, CA 92618. All rights reserved.
Product images are simulated and for instructional purposes only. They may differ from the actual product and are
subject to change without notice. Your use of Martian Watches is subject to the Martian Watches Safety, Regulatory
& Legal Terms located in the User Manual. The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by MARTIAN WATCH ES is under license. Other trademarks and trade
names are those of their respective owners.!
!
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to
connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless
performance. iPod, iPad, iPhone and Siri are trademarks of Apple Inc., registered in the U.S. and other countries.
Portions of this page are reproduced from work created and shared by the Android Open Source Project and used
according to terms described in the Creative Commons 2.5 Attribution License. Andr oid i s a t radem ark o f Google Inc.
This device complies with Part 15 of the FCC Rules. Operations is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation."
Note: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user’s authority to operate the
equipment."
This device complies with Industry Canada License-Exempt RSS
standard(s). Operation is subject to the following two conditions: (1)
This device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device."
FCC Compliance Statement
Loading...