Silverline Trimmer Bump Feed 400W User Manual [en, de, es, fr, it]

3 Year Guarantee

*Register online within 30
days. Terms & Conditions apply

Garantie de 3 ans
*Enregistrez votre produit en ligne
dans les 30 jours. Sous réserve des
Conditions Générales d’utilisation

3 Jahre Garantie
*Registrieren Sie sich innerhalb von 30
Tagen online. Es gelten die allgemeinen
Geschäftsbedingungen

3 años de garantía

*Regístrese online dentro de 30 días.
Se aplican los términos y condiciones

3 anni di garanzia
*Registrarsi on-line entro 30 giorni.
Termini e Condizioni si applicano

3 Jaar Garantie
*Registreer online binnen 30 dagen.
Algemene voorwaarden van toepassing

www.silverlinetools.com

R

E

L

V

I

N

L

I

S

POWER

R

E

E

A

G

N

400W Trimmer Bump Feed

400W Trimmer Bump Feed
Coupe-bordure filaire activé

par impact 400 W

267213

Elektro-Rasentrimmer mit
Auftipp-Automatik, 400 W

Cortabordes de hilo 400 W
Tagliabordi Elettrico 400W
400W Gras timmer met

automatische aantipspoel

www.silverlinetools.com

5

4

3

2

1

9

6

7

2

8

R

E

L

V

I

N

L

I

E

S

POWER

R

E

A

G

N

400W Trimmer Bump Feed

®

English .................. 4

Français ................ 8

Deutsch ................. 12

Español ................. 16

Italiano .................. 20

Nederlands ............ 24

www.silverlinetools.com

3

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.

Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection

Wear hand protection

Read instruction manual

Double insulated for additional protection

Conforms to relevant legislation and safety standards

Environmental Protection

Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice

Specification

Voltage: ................................................230V~

Frequency: ...........................................50Hz

Power: ..................................................400W

No load speed: .....................................10000min

Cutting diameter: ..................................300mm

Sound pressure: ...................................96dB(A)

Sound power: .......................................69dB(A)

Protection class: ...................................

The sound intensity level for the operator may exceed 85dB(A) and

sound protection measures are necessary.

As part of our ongoing product development, specifications of

Silverline products may alter without notice.

-1

General Safety

Carefully read and understand this manual and any label attached to
the tool before use. Keep these instructions with the product for future
reference. Ensure all persons who use this product are fully acquainted
with this manual.

Even when used as prescribed it is not possible to eliminate all residual risk
factors. Use with caution. If you are at all unsure of the correct and safe
manner in which to use this tool, do not attempt to use it.

Keep guards in position

• Where guards exist keep them in position, in good working order,
correctly adjusted and aligned. Never attempt to use a tool if any of
the supplied guards are missing. If any guards are damaged, replace
before use

Remove adjusting keys

• Where adjusting keys exist, ensure they are removed prior to using the
tool. Always check to see that keys and adjusting devices are removed
from the tool before use

Clean the work area

• Accidents can occur where benches and work areas are cluttered or
dirty. Keep floors clear and avoid working where the floor is slippery. If
working outdoors, be aware of all potential slip and trip hazards before
using this tool

Trained, competent persons

• This tool should be used by trained, competent persons only

Children and pets

• Keep children and pets at a safe distance from the work area. Lock tools
away where children cannot gain access

Use the correct tool

• Do not force or attempt to use a tool for a purpose for which it was not
designed. This tool is not intended for industrial use

Wear suitable clothing and footwear

• Do not wear loose fitting clothing, neckties, jewellery, or other
items which may become caught. Wear non-slip footwear or, where
appropriate, footwear with protective toe caps. Long hair should be
covered or tied back

Keep your balance

• Do not over-reach. Keep proper footing at all times and do not use tools
when standing on an unstable surface

Accessories

• The use of any attachment or accessory, other than those mentioned in
this manual, could be dangerous and result in damage or injury, and may
invalidate your warranty

Never stand on your tool

• Standing on your tool or its stand could cause serious injury if the tool
is tipped or collapses. Do not store materials above or close to the tool
in such a way that a person might stand on the tool to reach the stored
items

Secure work

• Where possible, always secure work. If appropriate, use a clamp or vice
so that both hands are free to operate the tool

Check for damaged or missing parts

• Before each use, check if any part of the tool is damaged or missing.
Carefully check that it will operate properly and perform its intended
function. Check alignment of moving parts for binding. Any guard or other
part that is damaged should be immediately repaired or replaced by an
authorised service centre. DO NOT USE IF DEFECTIVE

4

400W Trimmer Bump Feed 267213

Electrical Safety

The wires in this product are coloured:

Blue Neutral
Brown Live
Green & Yellow Earth

• This appliance must be protected by a suitable fuse

• To prevent fire or shock hazard, do not expose this product to rain, water

or moisture

• There are no user-serviceable parts inside except those referred to in
this manual

• Always refer servicing to qualified service personnel. Never remove any
part of the casing unless qualified to do so; this unit contains dangerous
voltages

• Use of a residual current device will reduce the risk of electric shock

NEVER CONNECT THE BROWN OR BLUE WIRE TO THE EARTH PIN OF A 13A
PLUG. IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN

Dangerous environment

• Do not use power tools in damp or wet conditions, or expose them to
rain. Provide adequate surrounding work space and keep the area well
lit. Do not use power tools where there is a risk of explosion or fire from
combustible material, flammable liquids, flammable gases, or dust of
an explosive nature. When using power tools, avoid contact with any
earthed items such as pipes, radiators, cookers, refrigerators, metal
baths and taps

Protect yourself from vibration

• Hand-held power tools may produce vibration. Vibration can cause
disease. Gloves may help to maintain good blood circulation in the
fingers. Hand-held tools should not be used for long periods without a
break

Maintain your power tool

• Ensure all ventilation holes are kept clear at all times, otherwise
overheating and fire may occur

Always disconnect

• Before changing fittings or accessories, always disconnect the tool from
the power source

Switch off before connecting

• Ensure the power tool is switched off before connecting to the power
source. If the power tool stops unexpectedly, turn the power switch to
OFF

Do not abuse the power cable

• Be sure the cable / extension cable is in good condition. Always have
a damaged cable / extension cable replaced at an authorised service
centre before using. Never pull the cable to disconnect it from the power
socket. Never carry the tool by its cable. Keep the cable away from damp,
heat, oil, solvents, and sharp edges

Do not modify the power tool

• Do not modify the power tool in any way as this could result in serious
injury and may invalidate its guarantee

Do not leave the tool running unattended

• Always wait until the tool has completely stopped functioning and has
been unplugged before leaving it unattended

Bump Feed Trimmer Safety

• Before use, always check and clear the work area of hidden objects and
debris that may jam the trimmer

• Dress appropriately and wear protective equipment, including gloves, eye
or face protection, and sturdy clothing

• If the trimmer becomes jammed, switch off immediately. Unplug the
power supply before attempting to clear jammed objects

• Do not use this product in wet conditions, and check grass is dry before
starting work

• Ensure the power lead is kept away from the cutting area. Damage to the
power lead may cause an electric shock

www.silverlinetools.com

5

GB

Product Familiarisation

1 Function Change Button
2 Shaft Adjustment Switch
3 Adjustable Secondary Handle
4 On/Off Switch
5 Handle
6 Trimmer Guard
7 Roller Guide
8 Safety Switch
9 Spool Housing

Unpacking Your Tool

• Carefully unpack and inspect your tool. Fully familiarise yourself with all
its features and functions

• Ensure that all parts of the tool are present and in good condition. If any
parts are missing or damaged, have such parts replaced

Assembling Your Bump Feed
Trimmer

1. Attach the Trimmer Guard (6) using the fixings included. Ensure that

the fixings are holding the guard securely in position

2. Attach the Roller Guide (7) using the fixings included

3. Attach the Adjustable Secondary Handle (3) using the fixings included

NOTE: The secondary handle is fully adjustable and must be positioned
each time to ensure that the user is comfortable using the trimmer.

Before Use

• Ensure that the shaft length is adjusted to suit the user. To adjust the
shaft length, slide the Shaft Adjustment Switch (2) downwards and slide
the shaft to the required setting

NOTE: Make sure the shaft has completely engaged into a locating notch
prior to use.

Function change

1. Ensure that the trimmer is unplugged from its power source

2. Press and hold the Function Change Button (1), and rotate the end of
the trimmer

3. When the trimmer has successfully located, release the function
change button. To check the head is secure, attempt to rotate the head
without using the function change button. The head should not move

Cutting

1. Always keep the machine at arms length, with the trimmer head
pointed away from your body

2. Move the trimmer head across the area to be trimmed using a smooth
sweeping motion

3. When approaching an edge or wall, use the roller guide to prevent
cutting or damaging other surfaces in the garden

4. Always be aware of the position of the power cord. Keep the power
cord well away from the cutting area at all times

Feeding the trimmer line

1. Turn the trimmer on

2. Press the Spool Housing (9) gently against the ground and the spool
will release trimmer line

3. The guard has a cutting edge which will cut off any excess line
released by the spool

Maintenance

WARNING: Always remove the plug from the mains power supply before
carrying out any maintenance/cleaning.

Spool maintenance

• After every use, ensure that all waste material is removed from the spool

Cleaning

• Keep your machine clean at all times. Dirt and dust will cause internal
parts to wear quickly, and shorten the machine’s service life. Clean the
body of your machine with a soft brush, or dry cloth. If available, use
clean, dry, compressed air to blow through the ventilation holes

Disposal

• Do not dispose of power tools, or other waste electrical and electronic
equipment, with household waste

• Contact your local waste disposal authority for information on the correct
way to dispose of tools

Using Your Trimmer

Power supply

• Use of an RCD (residual current device) will reduce the chance of electric
shock when using an outdoor power tool

• If it is necessary to use an extension lead, check that the lead is
specifically intended for outdoor use

Switching on

1. Ensure the trimmer head is in the correct position

2. Place the trimmer down, and connect the mains power supply

3. Pick up the trimmer; hold the machine with one hand on the Handle

(5), and the other on the Adjustable Secondary Handle (3). The handle
is equipped with an integrated Safety Switch (8)

4. To start the machine, squeeze the Safety Switch (8), and then the On/

Off Switch (4). The machine will run until the on/off switch is released

6

Silverline Tools Guarantee

This Silverline product comes with a 3 year
guarantee

Register this product at www.silverlinetools.com within 30 days of
purchase in order to qualify for the 3 year guarantee. Guarantee period
begins according to the date of purchase on your sales receipt.

Terms & Conditions

Guarantee period becomes effective from the date of retail purchase as
detailed on your sales receipt.

PLEASE KEEP YOUR SALES RECEIPT

If this product develops a fault within 30 days of purchase, return it to the
stockist where it was purchased, with your receipt, stating details of the
fault. You will receive a replacement or refund.

If this product develops a fault after the 30 day period, return it to:

Silverline Tools Service Centre
PO Box 2988
Yeovil
BA21 1WU, UK

The guarantee claim must be submitted during the guarantee period.
You must provide the original sales receipt indicating the purchase date,

your name, address and place of purchase before any work can be
carried out.

You must provide precise details of the fault requiring correction.
Claims made within the guarantee period will be verified by Silverline Tools

to establish if the deficiencies are related to material or manufacturing of
the product.

Carriage will not be refunded. Items for return must be in a suitably clean
and safe state for repair, and should be packaged carefully to prevent
damage or injury during transportation. We may reject unsuitable or
unsafe deliveries.

All work will be carried out by Silverline Tools or its authorized
repair agents.

The repair or replacement of the product will not extend the period
of guarantee

Defects recognised by us as being covered by the guarantee shall be
corrected by means of repair of the tool, free of charge (excluding carriage
charges) or by replacement with a tool in perfect working order.

Retained tools, or parts, for which a replacement has been issued, will
become the property of Silverline Tools.

EC Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: Silverline Tools

Declares that the

Name/ model: 400W Trimmer Bump Feed
Type/ serial no: 267213

Conforms to the following Directives:

• Machinery Directive 2006/42/EC

• Low Voltage Directive 2006/95/EC

• Electromagnetic Compatibilty Directive 2004/108/EC

• Noise Emissions for Outdoor Equipment Directive

2000/14/EC & 2005/88/EC

• EN60335-1/A13:2008; EN60335-2-91:2003;

EN60335-1/A2:2006

• EN62233:2008

• EN50366/A1:2006; EN55014-1:2006; EN55014-2/A1:2001

• EN61000-3-2:2006; EN61000-3-3/A2:2005

400W Trimmer Bump Feed 267213

Registering your purchase

Registration is made at silverlinetools.com by selecting the Guarantee
Registration button. You will need to enter:-

• Your personal details

• Details of the product and purchase information

Once this information is entered your guarantee certificate will be created
in PDF format for you to print out and keep with your purchase.

The repair or replacement of your product under guarantee provides
benefits which are additional to and do not affect your statutory rights as
a consumer.

What is covered:

The repair of the product, if it can be verified to the satisfaction of Silverline
Tools that the deficiencies were due to faulty materials or workmanship
within the guarantee period.

If any part is no longer available or out of manufacture, Silverline Tools will
replace it with a functional replacement part.

Use of this product in the EU.

What is not covered:

Silverline Tools does not guarantee repairs required as a result of:
Normal wear and tear caused by use in accordance with the operating

instructions eg blades, brushes, belts, bulbs, batteries etc.
The replacement of any provided accessories drill bits, blades, sanding

sheets, cutting discs and other related items.
Accidental damage, faults caused by negligent use or care, misuse,

neglect, careless operation or handling of the product.
Use of the product for anything other than normal domestic purposes.
Change or modification of the product in any way.
Use of parts and accessories which are not genuine Silverline Tools

components.
Faulty installation (except installed by Silverline Tools).
Repairs or alterations carried out by parties other than Silverline Tools or its

authorized repair agents.
Claims other than the right to correction of faults on the tool named in

these guarantee conditions are not covered by the guarantee.

The technical documentation is kept by: Silverline Tools
Notified body: Jiangsu TUV Product Service Ltd
Place of declaration: Wuxi, Jiangsu, China
Date: 27/09/11
Signed by:

Director

Name and address of Manufacturer or Authorised
representative:

Silverline Tools, Boundary Way, Lufton Trading Estate, Yeovil,
Somerset,
BA22 8HZ United Kingdom

www.silverlinetools.com

7

F

Description des symboles

La plaque signalétique figurant sur votre outil peut présenter des symboles.
Ces symboles constituent des informations importantes relatives au produit
ou des instructions concernant son utilisation.

Port de protection auditive
Port de lunettes de sécurité
Port de masques respiratoires
Port du casque

Port de gants

Lire le manuel d’instructions

Double isolation pour une protection supplémentaire

Conforme à la réglementation et aux normes de sécurité
pertinentes

Protection de l’environnement

Les produits électriques usagés ne doivent pas être jetés avec
les ordures ménagères. Veuillez les recycler dans les centres
prévus à cet effet. Pour de plus amples informations, veuillez
contacter votre municipalité ou point de vente

Caractéristiques techniques

Tension: ................................................230 V~

Fréquence: ...........................................50 Hz

Puissance: ............................................400 W

Vitesse à vide: ......................................10.000 tr/min

Diamètre de coupe: ..............................300 mm

Pression sonore: ...................................69, 1 dB(A)

Puissance sonore: ................................89, 1 dB(A)

Classe de protection: ............................

L’intensité sonore peut dépasser 85 dB(A) et il est recommandé que

l’opérateur prenne des mesures de protection sonore.

Du fait de l’évolution constante de notre développement produits,

les spécifications des produits Silverline peuvent changer sans

notification préalable.

-1

Consignes générales de sûreté

Lisez attentivement ce manuel ainsi que toute étiquette apposée sur l’outil
et assurez-vous d’en comprendre le sens avant utilisation. Rangez ces
consignes avec l’outil, pour référence ultérieure. Assurez-vous que toute
personne venant à utiliser cet outil ait attentivement pris connaissance de
ce manuel.

Sachez qu’utiliser un outil conformément aux prescriptions ne garantit
pas l’élimination de tous les facteurs de risque. Procédez avec prudence.
N’utilisez pas cet outil si vous avez des doutes quant à la manière sûre et
correcte de procéder.

Gardez les éléments de protection en place

• Gardez les éléments de protection en place, en bon état de
fonctionnement, correctement ajustés et alignés. N’utilisez jamais un
outil si l’un des éléments de protection fournis est manquant. Si l’un
des éléments de protection est endommagé, remplacez-le avant toute
utilisation

Retirez les clés de réglage

• Assurez-vous que les clés et autres dispositifs de réglage aient été retirés
de l’outil avant utilisation

Nettoyez la zone de travail

• Des établis et zones de travail encombrés ou sales sont sources
d’accidents ; de même, le sol doit être dégagé et il est recommandé
d’éviter de travailler sur un sol glissant. En cas de travail à l’extérieur,
appréciez les risques de faux pas ou de chute avant d’utiliser l’outil

Personnes compétentes

• Ce produit doit être utilisé par des personnes compétentes ou ayant reçu
une formation adéquate

Enfants et animaux

• Maintenez une distance de sécurité entre les enfants ou les animaux et
votre zone de travail. Rangez les outils dans un lieu sûr fermé à clé, hors
de portée des enfants

Utilisation correcte de l’outil

• Ne tentez pas d’utiliser un outil à des fins pour lesquelles il n’est pas
conçu. Cet outil n’est pas conçu pour un usage industriel

Port de vêtements et de chaussures adaptés

• Ne portez pas de vêtements amples, cravate, bijoux ou autres
éléments susceptibles d’être happés. Au besoin, portez des chaussures
antidérapantes ou équipées d’une coque de protection des orteils. Les
cheveux longs doivent être couverts ou noués vers l’arrière

Conservez l’équilibre

• Ne tentez pas de travailler dans des endroits hors de portée, gardez un
bon appui en permanence, n’utilisez pas d’outil lorsque vous êtes sur
une surface instable

Accessoires

• L’utilisation de tout équipement ou accessoires différant de ceux
mentionnés dans ce manuel peut être dangereuse, entraîner des
dommages matériels ou des blessures et annulera votre garantie

Ne vous tenez pas sur l’outil

• En vous appuyant ou en montant sur l’outil ou sur son support, vous
encourez des blessures graves s’il venait à basculer ou à s’affaisser.
Veillez à na pas ranger de matériel au-dessus ou à proximité de l’outil
et de telle sorte qu’il faille s’appuyer sur l’outil ou sur son support pour
atteindre ce matériel

Immobilisez la pièce à travailler

• Dans la mesure du possible, immobilisez la pièce sur laquelle vous
travaillez. Si cela est possible, utilisez un étau ou un serre-joint de
manière à disposer des deux mains pour manier l’outil

Assurez-vous qu’aucune pièce ne soit endommagée ou
manquante

• Avant chaque utilisation, assurez-vous qu’aucune pièce ne
soit manquante ou endommagée ; assurez-vous également du
fonctionnement correct et de la bonne marche des fonctions voulues.
Vérifiez l’alignement des pièces mobiles et l’absence de grippage. Toute
protection et autre pièce endommagées doivent être immédiatement
réparées ou remplacées par un centre de service agréé. N’UTILISEZ

JAMAIS UN OUTIL DEFECTUEUX

8