Silverline 100048 Instructions Manual
3 Year Guarantee
*Register online within 30
days. Terms & Conditions apply
Garantie de 3 ans
*Enregistrez votre produit en ligne
dans les 30 jours. Sous réserve des
Conditions Générales d’utilisation
3 Jahre Garantie
*Registrieren Sie sich innerhalb von 30
Tagen online. Es gelten die allgemeinen
Geschäftsbedingungen
3 años de garantía
*Regístrese online dentro de 30 días.
Se aplican los términos y condiciones
3 anni di garanzia
*Registrarsi on-line entro 30 giorni.
Termini e Condizioni si applicano
3 Jaar Garantie
*Registreer online binnen 30 dagen.
Algemene voorwaarden van toepassing
www.silverlinetools.com
www.silverlinetools.com
100048
230V Heavy Duty Power
Nailer Stapler
Agrafeuse-cloueuse usage
intensif 230 V
230-V-Klammernagler
Grapadora/clavadora
eléctrica alta exigencias
230 V
Chiodatrice spillatrice
resistente di 230V
230 V 'Heavy-Duty'
elektrische nietmachine
230V Heavy Duty Power Nailer Stapler
2
230V Heav
6
3
4
1
2
5
www.silverlinetools.com
3
English .................. 4
Français ................ 8
Deutsch ................. 12
Español ................. 16
Italiano .................. 20
Nederlands ............ 24
®
230V Heavy Duty Power Nailer Stapler
Carefully read and understand this manual and any label attached to
the tool before use. Keep these instructions with the product for future
reference. Ensure all persons who use this product are fully acquainted
with this manual.
Even when used as prescribed it is not possible to eliminate all residual risk
factors. Use with caution. If you are at all unsure of the correct and safe
manner in which to use this tool, do not attempt to use it.
General Safety
Clean the work area
• Accidents can occur where benches and work areas are cluttered or
dirty. Keep floors clear and avoid working where the floor is slippery. If
working outdoors, be aware of all potential slip and trip hazards before
using this tool
Children and pets
• Keep children and pets at a safe distance from the work area. Lock tools
away where children cannot gain access
Trained, competent persons
• This tool should be used by trained, competent persons only
Wear suitable clothing and footwear
• Do not wear loose fitting clothing, neckties, jewellery, or other
items which may become caught. Wear non-slip footwear or, where
appropriate, footwear with protective toe caps. Long hair should be
covered or tied back
Protective equipment
• Refer to the rating plate on your tool for information relating to the
necessary protective equipment when using this product. Example; dust
mask/respirator, goggles, ear defenders, gloves etc
Check for damaged or missing parts
• Before each use, check if any part of the tool is damaged or missing.
Carefully check that it will operate properly and perform its intended
function. Check alignment of moving parts for binding. Any guard or other
part that is damaged should be immediately repaired or replaced by an
authorised service centre. DO NOT USE IF DEFECTIVE
Use the correct tool
• Do not force or attempt to use a tool for a purpose for which it was not
designed. This tool is not intended for industrial use
Accessories
• The use of any attachment or accessory, other than those mentioned in
this manual, could be dangerous and result in damage or injury, and may
invalidate your warranty
Secure work
• Where possible, always secure work. If appropriate, use a clamp or vice
so that both hands are free to operate the tool
Keep your balance
• Do not over-reach. Keep secure footing at all times and do not use tools
when standing on an unstable surface
4
GB
Specification
Voltage: ................................................ 230V~
Frequency: ........................................... 50Hz
Staple size: ..........................................Type 53, 8-16mm
Nail size: .............................................. 10-16mm
Firing rate: ............................................ 20/min
Weighted vibration: .............................1.7m/s
2
Uncertainty ...........................................1.5 m/s2
Sound pressure: ................................... 87.0dB(A)
Sound power: ....................................... 100.0dB(A)
Uncertainty ...........................................3 dB(A)
Protection Class: ..................................
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Double insulated for additional protection
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice
www.silverlinetools.com
5
100048
Electrical Safety
Dangerous environment
• Do not use power tools in damp or wet conditions, or expose them to
rain. Provide adequate surrounding work space and keep the area well
lit. Do not use power tools where there is a risk of explosion or fire from
combustible material, flammable liquids, flammable gases, or dust of
an explosive nature. When using power tools, avoid contact with any
earthed items such as pipes, radiators, cookers, refrigerators, metal
baths and taps
Protect yourself from vibration
• Hand-held power tools may produce vibration. Vibration can cause
disease. Gloves may help to maintain good blood circulation in the
fingers. Hand-held tools should not be used for long periods without a
break
Switch off before connecting
• Ensure the power tool is switched off before connecting to the power
source. If the power tool stops unexpectedly, turn the power switch to
OFF
Always disconnect
• Before changing fittings or accessories, always disconnect the tool from
the power source
Do not abuse the power cable
• Be sure the cable / extension cable is in good condition. Always have
a damaged cable / extension cable replaced at an authorised service
centre before using. Never pull the cable to disconnect it from the power
socket. Never carry the tool by its cable. Keep the cable away from damp,
heat, oil, solvents, and sharp edges
Maintain your power tool
• Ensure all ventilation holes are kept clear at all times, otherwise
overheating and fire may occur
Do not modify the power tool
• Do not modify the power tool in any way as this could result in serious
injury and may invalidate its guarantee
Do not leave the tool running unattended
• Always wait until the tool has completely stopped functioning and has
been unplugged before leaving it unattended
Nailer Stapler safety
• Always keep your hands clear of the workpiece when using the nailer
stapler. Staples may cause serious injury if fired accidentally
• Always disconnect the nailer stapler from the power supply before
reloading staples or nails
• Never point this tool at persons or animals. Staples or nails fired, even
from a distance, can cause significant injuries
• Always position the nailer stapler at 90˚ to the work surface. Firing at
the wrong angle may cause staples or nails to ricochet back towards
the operator
• Do not attempt to fire staples into inappropriate materials. This nailer
stapler should only be used for wood, plasterboard, cork, or other soft
materials
• Ensure that the workpiece is adequately sturdy to stop the staple. In
some situations it may be possible for a staple or nail to pass through
a workpiece
• Do not attempt to fire staples or nails over existing fixings
• Do not fire staples or nails close to the edge of a workpiece, small pieces
may split off and could cause injury
• Do not use this tool to fasten electrical wiring. Contact with electric
current can lead to fire and/or electric shock
230V Heavy Duty Power Nailer Stapler
6
GB
Unpacking Your Tool
• Carefully unpack and inspect your tool. Fully familiarise yourself with all
its features and functions
• Ensure that all parts of the tool are present and in good condition. If
any parts are missing or damaged, have such parts replaced before
attempting to use this tool
Before Use
Checking the safety catch
This product should always be tested before use to ensure proper operation
of all safety mechanisms
1. With the nailer stapler disconnected from the mains power supply,
press down on the Magazine Latch (4) and pull open the Magazine
Cover (5). Check that there are no staples loaded in the magazine.
Close the Magazine Cover (5), ensuring the Magazine Latch (4) clicks
shut
2. Connect the nailer stapler to the mains power supply and move the
On/Off Switch (3) to the ON position
3. Push the Safety Catch (6) against a piece of wood without pulling the
trigger. The nailer stapler should NOT fire
4. Hold the tool away from the piece of wood. The Safety Catch (6)
should return to its original position
5. Pull the Trigger (1). The nailer stapler should NOT fire
6. Push the Safety Catch (6) against the piece of wood, and this time
pull the Trigger (1). The tool should fire and this indicates normal
operation
7. Move the On/Off Switch (3) to the OFF position, and disconnect from
the mains power supply
8. If the nailer stapler does not function as described above DO NOT
USE. Have the nailer stapler repaired at an authorised service centre
immediately
Loading the magazine
1. Ensure that the nailer stapler is disconnected from the mains power
supply
2. Press down on the Magazine Latch (4) and pull open the Magazine
Cover (5)
3. Insert fasteners into the magazine, ensuring the point of the fastener
is facing downwards (away from the Handle (2) of the tool). See
specification for suitable fasteners
4. Close the Magazine Cover (5), ensuring the Magazine Latch (4) clicks
shut
Operating instructions
Connection to power
1. Insert plug into the mains outlet and set the Power Switch (3) to the
ON position
2. To switch off power, set the power switch to the OFF position and
remove plug from mains outlet
Firing staples
1. Always hold the nailer stapler securely, using both hands. Grip the
Handle (2) with one hand, and place the other on the top of the body of
the nailer stapler. This will ensure that you have maximum control of
the tool
2. Hold the tool firmly against the material so that the Safety Catch (6) is
depressed
3. Gently squeeze the Trigger (1) until the staple is fired
4. Release the trigger and check that the staple has penetrated the
material correctly
Clearing jams
1. Disconnect nailer stapler from the mains power supply
2. Depress the Magazine Latch (4) and open the Magazine Cover (5)
3. Remove the obstruction using pliers
4. Reload the magazine and close securely
Maintenance
Cleaning
• Keep your machine clean at all times. Dirt and dust will cause internal
parts to wear quickly, and will shorten the machine’s service life
• Clean the body of your machine with a soft brush or dry cloth. If available,
use clean, dry, compressed air to blow through the ventilation holes
Brushes
• Over time the carbon brushes inside the motor may become worn.
Excessively worn brushes may cause loss of power, intermittent failure or
visible sparking
• If you suspect that the brushes may be worn, have them replaced at an
authorised service centre
Storage
• Store this tool and any accessories in a dry, secure place out of the reach
of children
Disposal
• Do not dispose of power tools, or other waste electrical and electronic
equipment, with household waste
• Contact your local waste disposal authority for information on the correct
way to dispose of tools
1 Trigger
2 Handle
3 On/Off Switch
4 Magazine Latch
5 Magazine Cover
6 Safety Catch
Product Familiarisation
www.silverlinetools.com
7
230V Heavy Duty Power Nailer Stapler100048
Notified body: China KEMA Quality Ltd
The technical documentation is kept by: Silverline Tools
Date: 03/07/14
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address:
Central House, Church Street, Yeovil, Somerset BA20 1HH,
United Kingdom.
Terms & Conditions
Silverline Tools Guarantee
This Silverline product comes with a 3 year guarantee
Register this product at www.silverlinetools.com within 30 days of purchase
in order to qualify for the 3 year guarantee. Guarantee period begins
according to the date of purchase on your sales receipt.
Registering your purchase
Registration is made at silverlinetools.com by selecting the Guarantee
Registration button. You will need to enter:-
• Your personal details
• Details of the product and purchase information
Once this information is entered your guarantee certificate will be created in
PDF format for you to print out and keep with your purchase.
Guarantee period becomes effective from the date of retail purchase as
detailed on your sales receipt.
PLEASE KEEP YOUR SALES RECEIPT
If this product develops a fault within 30 days of purchase, return it to the
stockist where it was purchased, with your receipt, stating details of the fault.
You will receive a replacement or refund.
If this product develops a fault after the 30 day period, return it to:
Silverline Tools Service Centre
PO Box 2988
Yeovil
BA21 1WU, UK
The guarantee claim must be submitted during the guarantee period.
You must provide the original sales receipt indicating the purchase date, your
name, address and place of purchase before any work can be carried out.
You must provide precise details of the fault requiring correction.
Claims made within the guarantee period will be verified by Silverline Tools
to establish if the deficiencies are related to material or manufacturing of
the product.
Carriage will not be refunded. Items for return must be in a suitably clean and
safe state for repair, and should be packaged carefully to prevent damage or
injury during transportation. We may reject unsuitable or
unsafe deliveries.
All work will be carried out by Silverline Tools or its authorized
repair agents.
The repair or replacement of the product will not extend the period
of guarantee
Defects recognised by us as being covered by the guarantee shall be
corrected by means of repair of the tool, free of charge (excluding carriage
charges) or by replacement with a tool in perfect working order.
Retained tools, or parts, for which a replacement has been issued, will
become the property of Silverline Tools.
The repair or replacement of your product under guarantee provides benefits
which are additional to and do not affect your statutory rights as a consumer.
What is covered:
The repair of the product, if it can be verified to the satisfaction of Silverline
Tools that the deficiencies were due to faulty materials or workmanship
within the guarantee period.
If any part is no longer available or out of manufacture, Silverline Tools will
replace it with a functional replacement part.
Use of this product in the EU.
What is not covered:
Silverline Tools does not guarantee repairs required as a result of:
Normal wear and tear caused by use in accordance with the operating
instructions eg blades, brushes, belts, bulbs, batteries etc.
The replacement of any provided accessories drill bits, blades, sanding
sheets, cutting discs and other related items.
Accidental damage, faults caused by negligent use or care, misuse, neglect,
careless operation or handling of the product.
Use of the product for anything other than normal domestic purposes.
Change or modification of the product in any way.
Use of parts and accessories which are not genuine Silverline Tools
components.
Faulty installation (except installed by Silverline Tools).
Repairs or alterations carried out by parties other than Silverline Tools or its
authorized repair agents.
Claims other than the right to correction of faults on the tool named in these
guarantee conditions are not covered by the guarantee.
Battery Guarantee
Silverline batteries are guaranteed for 30 days. If a defect occurs on a
registered battery during the term of the Battery Guarantee, due to material
or manufacturing fault, then Silverline will replace it free of charge. This
guarantee does not apply to commercial use nor does it extend to normal
wear and tear or damage as a result of accident, abuse or misuse.
CE Declaration of Conformity
The undersigned: Mr Darrell Morris
as authorised by: Silverline Tools
Declares that
Identification code: 100048
Description: 230V Heavy Duty Power Nailer Stapler
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
• RoHS Directive 2011/65/EU
• EN 60745-1:2009
• EN 50144-1:1998+A1:2002+A2:2003
• EN 50144-2-16:2003
• EN 62233:2008
• EN 55014-1:2006+A1:2009
• EN 55014-2:1997+A1:2001+A2:2008
• EN 61000-3-2:2006+A1:2001+A2:2009
• EN 61000-3-3:2008
8
F
Lisez attentivement ce manuel ainsi que toute étiquette apposée sur l’outil
et assurez-vous d’en comprendre le sens avant utilisation. Rangez ces
consignes avec l’outil, pour référence ultérieure. Assurez-vous que toute
personne venant à utiliser cet outil ait attentivement pris connaissance de
ce manuel.
Sachez qu’utiliser un outil conformément aux prescriptions ne garantit
pas l’élimination de tous les facteurs de risque. Procédez avec prudence.
N’utilisez pas cet outil si vous avez des doutes quant à la manière sûre et
correcte de procéder.
Consignes générales de sûreté
Nettoyez la zone de travail
• Des établis et zones de travail encombrés ou sales sont sources
d’accidents ; de même, le sol doit être dégagé et il est recommandé
d’éviter de travailler sur un sol glissant. En cas de travail à l’extérieur,
appréciez les risques de faux pas ou de chute avant d’utiliser l’outil
Enfants et animaux
• Maintenez une distance de sécurité entre les enfants ou les animaux et
votre zone de travail. Rangez les outils dans un lieu sûr fermé à clé, hors
de portée des enfants
Personnes compétentes
• Ce produit doit être utilisé par des personnes compétentes ou ayant reçu
une formation adéquate
Port de vêtements et de chaussures adaptés
• Ne portez pas de vêtements amples, cravate, bijoux ou autres
éléments susceptibles d’être happés. Au besoin, portez des chaussures
antidérapantes ou équipées d’une coque de protection des orteils. Les
cheveux longs doivent être couverts ou noués vers l’arrière
Equipements de protection
• Référez-vous à la plaque signalétique de l’outil quant aux équipements
de protection nécessaires à l’utilisation du produit. Ceux-ci comprendront
par exemple un masque, des lunettes de protection, des protections
auditives, des gants de sécurité, etc.
Assurez-vous qu’aucune pièce ne soit endommagée ou
manquante
• Avant chaque utilisation, assurez-vous qu’aucune pièce ne
soit manquante ou endommagée ; assurez-vous également du
fonctionnement correct et de la bonne marche des fonctions voulues.
Vérifiez l’alignement des pièces mobiles et l’absence de grippage. Toute
protection et autre pièce endommagées doivent être immédiatement
réparées ou remplacées par un centre de service agréé. N’UTILISEZ
JAMAIS UN OUTIL DEFECTUEUX
Utilisation correcte de l’outil
• Ne tentez pas d’utiliser un outil à des fins pour lesquelles il n’est pas
conçu. Cet outil n’est pas conçu pour un usage industriel
Accessoires
• L’utilisation de tout équipement ou accessoires différant de ceux
mentionnés dans ce manuel peut être dangereuse, entraîner des
dommages matériels ou des blessures et annulera votre garantie
Immobilisez la pièce à travailler
• Dans la mesure du possible, immobilisez la pièce sur laquelle vous
travaillez. Si cela est possible, utilisez un étau ou un serre-joint de
manière à disposer des deux mains pour manier l’outil
Conservez l’équilibre
• Ne tentez pas de travailler dans des endroits hors de portée, gardez un
bon appui en permanence, n’utilisez pas d’outil lorsque vous êtes sur
une surface instable
Charactéristiques techniques
Tension: ...............................................230 V~
Fréquence: ........................................... 50 Hz
Taille des agrafes: ................................Type 53, 8-16 mm
Taille des pointes: .................................10-16 mm
Fréquence de frappe: ........................... 20/min
Vibration pondérée: .............................. 1,7 m/s
2
Incertitude ............................................ 1,5 m/s2
Pression sonore: ................................... 87,0 dB(A)
Puissance sonore: ................................ 100,0 dB(A)
Incertitude ............................................ 3 dB(A)
Classe de protection: ............................
L’intensité sonore peut dépasser 85 dB(A) et il est recommandé que
l’opérateur prenne des mesures de protection sonore.
Du fait de l’évolution constante de notre développement produits, les
caractéristiques techniques des produits Silverline peuvent changer
sans notification préalable.
Description des symboles
La plaque signalétique figurant sur votre outil peut présenter des symboles.
Ces symboles constituent des informations importantes relatives au produit
ou des instructions concernant son utilisation.
Port de protection auditive
Port de lunettes de sécurité
Port de masques respiratoires
Port du casque
Port de gants
Lire le manuel d’instructions
Double isolation pour une protection supplémentaire
Conforme à la réglementation et aux normes de sécurité
pertinentes
Protection de l’environnement
Les produits électriques usagés ne doivent pas être jetés avec
les ordures ménagères. Veuillez les recycler dans les centres
prévus à cet effet. Pour de plus amples informations, veuillez
contacter votre municipalité ou point de vente
Loading...