Silvercrest 66978, SVG 2.0 A2, 110624, SVG 2.0 A3, USB Video Grabber SVG 2.0 A3 User Manual And Service Information
English ........................................................................................................... 2
Ελληνικά ..................................................................................................... 14
Deutsch ....................................................................................................... 26
V 1.21
English SilverCrest USB 2.0 Video Grabber SVG 2.0 A2
Content
Trademarks ........................................................................................................... 3
Introduction ........................................................................................................... 3
What is permitted to be reproduced? ..................................................................................................... 3
System requirements ................................................................................................................................. 3
Features of the video grabber ................................................................................................................. 4
Intended use .......................................................................................................... 4
Supplied items ....................................................................................................... 5
Technical data ....................................................................................................... 6
Safety instructions ................................................................................................. 6
First use ................................................................................................................. 8
Installing the software .............................................................................................................................. 8
Connection overview................................................................................................................................ 9
Connecting to your PC ............................................................................................................................. 9
Cleaning / maintenance ....................................................................................... 11
Environmental and disposal information ............................................................. 11
Conformity information ....................................................................................... 11
Troubleshooting .................................................................................................. 11
Warranty and servicing advice ............................................................................ 12
2
SilverCrest USB 2.0 Video Grabber SVG 2.0 A2 English
Trademarks
Microsoft Windows is a registered trademark of Microsoft Corporation, USA.
Pentium is a trademark of Intel Corporation, USA.
AMD and AMD Athlon are registered trademarks of Advanced Micro Devices, Inc.
USB is a registered trademark.
Other names and products may be the trademarks or registered trademarks of their respective
owners.
Introduction
Thank you for purchasing the SilverCrest USB 2.0 Video Grabber SVG 2.0 A2.
What is permitted to be reproduced?
Please note that this device is configured so that copyright protected material cannot be recorded. It is
not permitted to misuse this device to avoid copy protection. Unless you are the copyright owner or
have permission of the copyright owner, unauthorised reproduction may be a breach of national or
international law and serious penalties can result.
This product contains copy protection technology which is protected by US patents and other
intellectual property rights of the Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
System requirements
Computer PC or notebook with sound output
Processor performance from Pentium 4 class or AMD Athlon with 1.2 GHz or more
Operating system Windows
RAM 512 MB or more
Connection USB 2.0 or USB 3.0 port
®
XP/Vista or Windows® 7/8
3
English SilverCrest USB 2.0 Video Grabber SVG 2.0 A2
Features of the video grabber
High Speed USB 2.0 for optimal recording quality
Direct conversion into MPEG 2 format with Power Director, ideal for digital post processing
Up to 25 frames per second with a resolution of up to 720 x 576 (PAL)
Composite and S-Video analogue input
Software supports snapshot (single picture) mode, brightness, contrast, colour, saturation and
sharpness settings
Stereo audio recording
Intended use
The SilverCrest USB 2.0 Video Grabber SVG 2.0 A2 is an information technology device. It changes
analogue information, for example, from a camcorder, into digital information that can be saved onto
a PC and processed. The device may only be used with a USB 2.0 or USB 3.0 connection. The USB
1.1 standard is not supported. The device must not be connected to USB 1.1.
It is only designed for private use and not for industrial or commercial purposes. This product is not
designed for medical, life-saving or life-sustaining applications. Furthermore, the device may not be
used outdoors or in tropical climates. This device meets all relevant norms and standards in
conjunction with CE conformity. In the event of any modification to the device that was not approved
by the manufacturer, compliance with these standards is no longer guaranteed. Only use accessories
specified by the manufacturer.
Please observe the regulations and laws in the country of use.
4
SilverCrest USB 2.0 Video Grabber SVG 2.0 A2 English
Supplied items
1 SilverCrest USB 2.0 Video Grabber
2 SCART adapter
3 S-Video cable
4 AV cable
5 Audio/video adapter
6 USB cable (extension cable)
7 Installation and application software (symbolic representation)
8 User manual (symbolic representation)
5
English SilverCrest USB 2.0 Video Grabber SVG 2.0 A2
Technical data
Video input RCA video jack (yellow) / S-Video jack (black)
Audio input RCA audio jack (red/white)
Video system PAL, NTSC
Video format MPEG2 720x576 pixels
Picture format BMP, JPG, GIF, PNG
Port USB 2.0, USB 3.0
Dimensions 73 x 30 x 11 mm (L x W x H)
Weight 14 g
The technical data and design may be changed without notification.
Safety instructions
Before using this device for the first time, please read the following instructions carefully and take note
of the safety warnings, even if you are familiar with the use of electronic devices. Please keep these
instructions safe for future reference. If you sell the device or pass it on, always include these
instructions. They are an integral part of the product.
DANGER! This symbol indicates an imminent dangerous situation which, if not
prevented, could result in serious injury or even death.
WARNING! This symbol indicates important information for safe operation of the
device and the safety of the user.
This symbol indicates other important information on the topic.
Operational safety
Please follow the usage instructions of your computer.
Keep the device away from moisture, vibrations, dust, heat and direct sunlight to avoid system
failure.
6
SilverCrest USB 2.0 Video Grabber SVG 2.0 A2 English
Never open the device housing. If you do so, the warranty will become void and may lead to
permanent damage to the device.
After a transport, wait until the device has reached ambient temperature before using it for the first
time. With extreme temperature or humidity fluctuations, condensation can lead to a formation of
moisture that can cause an electrical short circuit.
Always handle the cables by the connector and do not pull on the cables themselves. Do not
place any heavy objects on the cables or connectors and ensure that the cable shielding does not
become cracked. When connecting the device, ensure that the cable is not too taut and the
connector plug is not stressed. Never make knots in any of the cables or tie them together with
other cables. All cables should be positioned so that nobody can trip over them and they cannot
cause an obstruction.
Children and persons with disabilities
Electrical devices do not belong in the hands of children. Persons with physical, mental or sensory
disabilities should also only use electrical devices within the scope of their abilities. Never allow
children or persons with disabilities to use electrical devices unsupervised unless they have been
instructed accordingly or are supervised by a person responsible for their safety. Children should
always be supervised to ensure that they do not play with this device. Small parts can be fatal if
swallowed. Always keep plastic packaging out of reach also.
It poses a suffocation risk!
Electromagnetic compatibility
The guidelines for electromagnetic compatibility (EMC) must be adhered to when connecting the
device. Ensure that there is a minimum distance of 1m from high frequency and magnetic sources of
interference (e.g. TVs, loudspeakers, mobile phones, etc.) in order to prevent malfunctions and loss of
data.
Back up
Please ensure that you back up your data to external storage media after every update. Damage
claims for lost data or for consequential losses as a result of lost data are excluded.
7
English SilverCrest USB 2.0 Video Grabber SVG 2.0 A2
p
p
w
First use
Installing the software
The required software (drivers and applications) must first be installed before you
lug in the device. Important files can be overwritten and altered during installation of
rograms or drivers. You should back up the contents of your hard drive before
installing the program so that you can still access your original files if there is a
problem with the installation.
If your operating system is configured so that the installation of software and drivers is
only accepted if they are signed (approved by Microsoft), an appropriate dialog box
ill appear. This does not mean that the driver is defective, but only indicates that it
does not have the Microsoft signature. You can ignore this advice. Click on "Next" to
install the driver.
Insert the enclosed CD ROM into the drive and the installation menu will open automatically.
Click on the desired national flag to select the relevant language.
Install the software (Power Director) and the driver according to the directions on the screen.
Restart your PC after installation to complete the process.
If the installation wizard does not automatically start when the CD ROM is inserted,
then the Autorun function of your CD drive is deactivated. Then proceed as follows:
Open the Explorer file or Windows Explorer.
Double-click on your CD drive with the left mouse button.
Then start the Autorun function by double-clicking with the left mouse button on the Autorun
application (Autorun.exe).
A description of the software can be found on the CD-ROM under the item "Power
Director Help".
8
SilverCrest USB 2.0 Video Grabber SVG 2.0 A2 English
Connection overview
Connect the adapter (5) to the Video Grabber (1). Insert the adapter into the jack at the back of the
Video Grabber (see diagram).
Video Grabber
Adapter
Snapshot button
1
S-Video input
Stereo audio input (white/red)
Composite video input (yellow)
Connecting to your PC
In order to record with the Video Grabber, you must first install the software (POWER DIRECTOR). If
you haven't already done so, go to the section entitled "Installing the software" and follow the
instructions.
Connect the adapter (5) to the Video Grabber (1) as shown in the previous diagram.
Connect the video output of your source (e.g. camcorder) to the Video Grabber. The following
connection types are available here:
1
This button generates a snapshot (photo of the current video) when the recording mode of the
enclosed Power Director software is activated.
9
English SilverCrest USB 2.0 Video Grabber SVG 2.0 A2
Video / S-Video signal
To transfer images, connect either the S-Video cable (3) (same connectors at both ends of the
cable) or the yellow connector of the AV cable (4) (yellow, red and white connectors at both
ends of the cable) with the respective jacks of the adapter and your desired source.
Do not plug in both the S-Video cable and the yellow RCA cable at the same time.
Audio signal
For audio transmission, connect the red and white connectors of the AV cable (4) (yellow, red
and white connectors at both ends of the cable) with the respective jacks of the adapter and
your desired source.
SCART adapter
If your source does not have a video or S-Video connection, use either the S-Video cable (3)
(same connectors at both ends of the cable) or the yellow connector of the AV cable (4)
(yellow, red and white connectors at both ends of the cable) with the SCART adapter and then
connect this to your source in order to transfer images.
For audio transmission, also connect the red and white connectors of the AV cable (4) (yellow,
red and white connectors at both ends of the cable) to the SCART adapter and your desired
source.
Plug the Video Grabber's USB connector into a free USB 2.0 or USB 3.0 port, ensuring your PC is
switched on. Use the enclosed extension cable (6) if necessary to extend the reach of the cable. If
possible, ensure that the Video Grabber is directly connected to your PC (and not via a USB hub).
Only use the device with a USB 2.0 or USB 3.0 connection.
The operating system will automatically detect the Video Grabber. Follow the instructions on the
screen.
Use the enclosed software (Power Director) to record your source. The software provides you with
detailed instructions in electronic form.
10
SilverCrest USB 2.0 Video Grabber SVG 2.0 A2 English
Cleaning / maintenance
Warning! This device does not contain any parts that require servicing or cleaning. Never open the
housing of the device to avoid hazards. Ensure that the components do not become dirty. Do not use
any solvents, corrosive or gaseous cleaning agents. Clean the device with a damp cloth if it becomes
dirty.
Environmental and disposal information
The crossed out wheelie bin symbol on a product indicates that the product is subject to
European Directive 2012/19/EU. All old electrical and electronic devices must be
separated from normal household waste and disposed of at designated state facilities.
The correct disposal of old devices in this manner will prevent environmental pollution and human
health hazards. For further information about proper disposal, contact your local authorities, waste
disposal office or the shop where you bought the device.
Conformity information
This device fully meets the basic requirements and other relevant regulations of the
EMC Directive 2004/108/EC as well as the RoHS Directive 2011/65/EU. The
Declaration of Conformity can be found at the end of these operating instructions.
Troubleshooting
The Video Grabber is connected, but is not recognised by the operating system.
Check all the connections.
Are you using an operating system that is supported?
New USB devices have been recognised and drivers must be installed.
If a USB device is connected to a new port, it is given a new ID. This usually requires a driver
installation, even if the driver was already installed.
The video received over the S-Video cable is in black and white.
The playback source must be switched to S-Video.
Error message indicating that the video is protected.
The copy protection system has been activated. This material cannot be copied.
Please consult the software help section on the enclosed software CD for information on using the
software.
11
Loading...