PETBLE SmartBowl Instruction Manual
Start Using SmartBowl
Container
Indicator LED
Powering Up the SmartBowl
Battery
Compartment
SmartBowl
1. Insert 3 AA batteries into the batteries compartment
located at the underside of the Smartbowl.
Pairing SmartBowl
SmartBowl Standalone Operation (1)
PETBLE SmartBowl and SmartTag are designed to work with the
PETBLE app. You can download iOS and Android versions of the app
from Apple’s App Store and Google’s Play Store respectively. Once
installed, you can follow instructions from the app to pair both devices
with your smartphone. For you convenience, the QR code to the stores
is provided above.
Everytime you set up the desired amount of food via the PETBLE app,
PETBLE SmartBowl stores the gure in its memory and is able to use
it for future feeding without requiring to connect to the app everytime.
This is referred as the Standalone Operation mode. In this mode, the
light indicator is used to indicate whether the right amount of food is put
into the container.
SmartBowl Standalone Operation (2)
SmartBowl Standalone Operation (3)
Orange Green Red
2
1
1. Trigger the standalone operation mode by lifting the
container from the base. Once you see ashing red light
from the indicator light, put back the container on the
base to start the mode.
2. After putting back the container on the base, wait for the
indicator light for SmartBowl status.
Orange light is lit when too little food is in the container
Green light is lit when the right amount of food is in the
container
Red light is lit when too much food is in the container
3. When there is no weight change over 5 seconds,
SmartBowl assumes the end of operation and returns to
normal mode.
1. Wash the container under cold tap water with liquid
detergent.
2. Wipe the container dry before putting it back on to the
SmartBowl.
* Do not wash the Smartbowl.
Compliance Cleaning the SmartBowl
SmartBowl
Manufactured by:
SGI Venture Limited
22/F., Tower B, Billion Centre, No. 1 Wang Kwong Road
Kowloon Bay, Kowloon, Hong Kong
Rating: DC 3xAA 4.5V 0.1A
Batch No.: 20170104001A
Contain FCC ID: 2ACIJ71050-3
IC: 22249-SB1000A
Model No.: PETBLE-SBW-OP-1000A
R
Loading...