Silicon Controls SC441001 User Manual

USER MANUAL

SC441C7xx TRANSMITTERS

Unit 14A 2 Eden Park Drive
North Ryde NSW 2113 Australia
ACN 054 993 529
Phone [phone]
Fax [phone]
Document: ML000044 Rev 1
Copyright© 2009 Silicon Controls Pty Ltd

SC441C7xx Series User Manual

DISCLAIMER

All material contained in this document is furnished pursuant to the terms and conditions of a duly
executed Program Product Licence ("Licence") and/or a duly executed Agreement to Purchase or
Lease Equipment ("Agreement").

All terms, conditions, warranties, undertakings, inducements or representations, whether express,
implied, statutory or otherwise, relating in any way to the products the subject of the Licence
and/or the Agreement are excluded, other than:

1. terms, conditions or warranties expressly provided for in the Licence and/or the Agreement;
and

2. terms, conditions or warranties implied by any Act of Parliament which may not be excluded
provided that Silicon Controls Pty Ltd liability for any breach of any such term, condition or
warranty shall, subject to the Licence and/or Agreement, be limited at the option of Silicon
Controls Pty Ltd to any one or more of the following:
(a) if the breach relates to goods:

i. the replacement of the goods or the supply of the equivalent goods;

ii. the repair of the goods;

iii. the payment of the cost of replacing the goods or of acquiring equivalent goods;

or

iv. the payment of the costs of having the goods repaired; and

(b) if the breach relates to services:

i. the supplying of the services again; or

ii. the payment of the cost of having the services supplied again.

Without limiting the generality hereof, Silicon Controls Pty Ltd shall not be under any liability to
any person in respect of any loss or damage, including consequential loss or damage and
however caused, which may be suffered or incurred or which may arise directly or indirectly from
the use of the material contained in this document or any other material furnished pursuant to the
Licence and/or the Agreement.

All the users of the material contained in this document or any other material furnished pursuant
to the Licence and/or the Agreement should ensure that the material is used in compliance with
the laws, rules and regulations of the jurisdictions in which the material is used.

The material contained within is subject to change without notice and Silicon Controls Pty Ltd
may issue revised documents containing any such changes.

ML000044 © 2009 All Rights Reserved Page 2

CHANGE HISTORY

SC441C7xx Series User Manual

Rev Description Date Changed

By

1 First Release 29/11/2009 TC JH

Note some sections of this document contain controlled content that is subject to regulatory body
approval. If modifying sections marked as controlled content, check that approval body
requirements are still met.

Approved
By

ML000044 © 2009 All Rights Reserved Page 3

TABLE OF CONTENTS

SC441C7xx Series User Manual

DISCLAIMER ................................................................................................................................... 2

CHANGE HISTORY ........................................................................................................................ 3

TABLE OF CONTENTS .................................................................................................................. 4

1 PRODUCT DESCRIPTION ...................................................................................................... 5

1.1 Connectors ...................................................................................................................... 6

2 INSTALLATION ........................................................................................................................ 7

2.1 Positioning the Transmitter .............................................................................................. 7

2.2 Installing Sensors and Cabling ........................................................................................ 7

Securing the Transmitter ............................................................................................................. 8

2.2.1 Fixing the Transmitter to a Horizontal Tank................................................................. 8

3 MAINTENANCE ....................................................................................................................... 9

3.1 Replacing the Transmitter ............................................................................................... 9

3.2 Maintaining the Transmitter ............................................................................................. 9

3.3 FCC PART 15 COMPLIANCE ....................................................................................... 10

4 Warranty ................................................................................................................................. 11

ML000044 © 2009 All Rights Reserved Page 4