Silicon Controls SC414002 User Manual

Silicon Controls Pty Ltd All Rights Reserved

SC414

Cellular Dialer

User Manual

Date: 2013-09-02

Suite 2, Level1; 12 Waterloo Road
Macquarie Park NSW 2113 Australia
(ACN 054 993 529)
Phone [phone]
Fax [phone]
Document: ML000043 rev 3

 2013

Reserved

All material contained in this document is furnished

Licence ("Licence") and/or a duly executed Agreement to Purchase or Lease Equipment ("Agreement") and/or a duly

Disclosure Agreement (“NDA”). All terms, conditions, warranties, un

representations, whether express, implied, statutory or otherwise, relating in any way to the products the subject of

the Licence and/or the Agreement and/or the NDA are excluded, other than:

expressly provided for in the Licence and/or the Agreement and/or the NDA; and

terms, conditions or warranties implied by any Act of Parliament which may not be excluded

provided that the liability of Silicon Controls Pty Ltd for any breach of any such ter

subject to the Licence and/or Agreement, be limited at the option of Silicon Controls Pty Ltd to any one or more of the

the replacement of the goods or the supply of the equivalent

the repair of the goods;

the payment of the cost of replacing the goods or of acquiring equivalent goods; or

the payment of the costs of having the goods repaired; and

if the breach relates to services:

the supplying of the services again; or

yment of the cost of having the services supplied again.

Without limiting the generality hereof, Silicon Controls Pty Ltd shall not be under any liability to any person in respect

of any loss or damage, including consequential loss or damage and however ca

incurred or which may arise directly or indirectly from the use of the material contained in this document or any other

material furnished pursuant to the Licence and/or the Agreement and/or the NDA.

rial contained in this document or any other material furnished pursuant to the Licence and/or

the Agreement and/or the NDA should ensure that the material is used in compliance with the laws, rules and

regulations of the jurisdictions in which the materia

without notice and Silicon Controls Pty Ltd may issue revised documents containing any such changes.

Description of Change

Release for FCC Certification

Revised corporate address.

Added RF Exposure information

Clarified model numbering in

response to TCB query.

pursuant to the terms and conditions of a duly executed Product

dertakings, inducements or

m, condition or warranty shall,

used, which may be suffered or

l is used. The material contained within is subject to change

Disclaimer

executed Non-

1. terms, conditions or warranties

2.

following:
(a) if the breach relates to goods:

(i)
(ii)
(iii)
(iv)

(b)

(i)
(ii) the pa

All the users of the mate

goods;

Change History

Revision Date

1 2009-12-02
2 2013-08-07

3 2013-09-02

Document: ML000043 rev 3

© 2013 Silicon Controls Pty Ltd All Rights

Prepared By

JH

JH

Approved By

MN
MN

JH

MN

Page 1 of 7

Reserved

The GASLOG System is a telemetry system designed to provide continuous monitoring of gas tank

level, meter reading, and other status information is transferred from the remote site to

the enterprise database according to a defined reporting schedule.

Sites communicate with a Server using the mobile telephone network

. The Server stores the site information in an industry standard SQL database that can easily

be integrated into other processes in the supply chain.

The GASLOG system is highly scalable and capable of handling hundreds of thousands of customers,

Model Numbering

6 = 868Mhz Long Range Type 2

6 = GSM + UMTS/HSPA

1 = 2G GSM Type 1

4 = 1xRTT CDMA Type 1

(GSM/GPRS or CDMA, depending

7 = 916Mhz Long Range Type 2

5 = GSM 850/900/1800/1900

8 = 1xRTT + EVDO CDMA

1 OVERVIEW

1.1 GASLOG System

installations. Tank

on model)

sites and tanks.

1.2 GASLOG

SC414anrst – Cellular Dialer

a = A = ANZ (IECEx)

n =

3 = GSM 900/1800

r =

s =

t =

GASLOG System Architecture

B = EEC (ATEX)

4 = GSM 850/1900

7 = 1xRTT CDMA

1 = 2 x Universal Input (3V)

2 = 2G GSM Type 2

5 = 1xRTT + EVDO CDMA Type 1

C = USA (AEx)

3 = 3G GSM Type 1

Document: ML000043 rev 3

© 2013 Silicon Controls Pty Ltd All Rights

Page 2 of 7