Silica Seriz II Quick Start Manual

Silica

Quick Start Guide

Seriz II Board

Contents

1 Open the package ..................................................................................................................................... 3

2 General Description ................................................................................................................................... 4

3 Development Environment : LPCXpresso ................................................................................................... 5

3.1.1 Requirements .............................................................................................................................. 5

3.1.2 Software Installation .................................................................................................................... 5

3.1.3 Source code ................................................................................................................................. 7

4 Seriz II Connectors / Switches Description ................................................................................................. 8

Revision History

Rev. Date Description

A 31.12.2012 Starting revision

B 09.03.2013 Changed directory of emWin unzip

C 22.11.2013 Update reference directory for emWin and LPCOpen library

2

1 Open the package

The board is delivered with an application preloaded. This demo application will check for the card type and
show electronic business cards (vCard) information if present.

To run the demo simply connect a USB cable to the MINI USB connector

The application will start, showing a simple presentation of the board.

If a card ( MIFARE, ISO14443B, ISO15693, Felica ) is put near the antenna, the card type and the card ID is
shown.

When a MIFARE card contains vCard informations the display will show the content.

3