Silex technology Network Adapter C-6700WG Setup Manual

Download

Page 1

C-6700WG

Power Supply

Setup Guide

Warranty Booklet

CX User Software

Contents

http://www.silexamerica.com/register/

For User Registration

Rubber Feet

Stand

When the product is placed in the horizontal (side) position, please use the rubber feet provided to prevent the unit from sliding. Place one on each corner.

Customer Support

USA : silex technology america, Inc.

E-mail : support@silexamerica.com URL : http://www.silexamerica.com/ Phone: 801-748-1199 US Toll Free Phone: 866-765-8761

Setup Guide

Safety instructions are noted in the Readme le on the CX User Software . Be sure to read them before using this product.

- Safety instructions regarding the radio waves

Please note the following instructions:

- Do not use this product near medical devices such as a heart pacemaker. The radio wave generated by this product may interfere with the operation of these devices and may threaten one's life.

- Do not use this product near microwave ovens. The radio wave used by microwave ovens may cause interference to this product.

W A 0 3 7 9 0 X X

Introduction

To use this product over the wireless LAN network, you need to congure wireless LAN settings a s appropriate for your network. This informati on needs to be identical to the communication devices such as an access point. Please collect the following information before the setup.

Wireless mode

SSID

Encryption method

Ad hoc (ch. ) / Infrastructure

WEP KEY or Pre-Shared Key

WEP

(Open / Shared)

Encryption method

/ WPA / WPA2

Write down your network conguration

Insert the CD-ROM (

CX User Software

) into your Windows PC.

Startup men u is display ed. Click

Print Server Setup

CX Wireless Setup screen is displayed.

Check the notes on the screen and select

Congure print server wirelessly from your computer and click

Next.

Read the SOFTWARE LICENSE AGREEMENT

and click

Yes.

Step 1 : Congure the Network

To ensure these settings take eect, unplug the AC adapter from the electrical outlet and then plug it back in.

-USB cable

The following item is required:

1. Remove the AC plug from the electric outlet.

2. Push and hold the button on the print server while re-inserting the AC plug

into the electric outlet. Continue holding.

3. The St atus LED(O range ) wi ll li ght w hen t he f actor y de fault conguration settings have been restored. Release the push switch.

To reset to the factory default settings

Install the printer driver on your PC. For details, refer to the manual that came with your printer.

Connect the AC adapter to this product and the power plug to the outlet.

(Do not connect the printer to this product yet. Printer will be connected in ‘18’)

Verify the Wireless LED(Green) blinks.

Click Wireless .

* In a Windows XP (SP2 or higher) or Vista environment, the above message

will be displayed. Select Yes.

* The User Account Control screen is displayed when conguration is performed

on Windows Vista. Select

Continue.

13.

Select Get IP Address Automatically and click

Conrm the conguration parameters and click

Execute

15.

14.

* If the wireless network that you wish to use is not shown in

the list, click

Detailed Cong and congure each setting.

If the screen above is displayed, you need to change the wireless settings on the PC manually. Read the message and click

OK.

11.

Select a product to be congured and click

* If your product is not displayed on the list, click

Refresh

* If multip le products are disp layed in the list, c heck the

Ethernet Address

on the label of this product.

16.

Select Yes

and click

Finish

<< If you did not need to change the wireless settings on the PC manually in ‘11’, this screen will appear >>

Click

Finish.

Change the wireless settings on the PC (that you have manually changed) back to the previous settings written down in ‘11’.

10.

If the screen above is displayed, select the wireless network card to be used and click

This screen is displayed only when two or more network cards are installed on your PC. Select this product and click Next.

Congure Through a Wireless LAN

Use to connect this product and a printer. There is no need to purchase a new USB cable when a cable was bundled with the printer to be connected to this product.

Check the message and click

* If you use Windows XP or Vista and the setup utility automatically

changed the wireless settings on the PC, this screen is not displayed.

If the wireless settings on the PC dier from the conguration information on the screen above, change the PC wireless settings to match those displayed on the screen. Verify the wireless settings on the PC and click Next

* Application install screen will be displayed as

shown in Step 2 - 3.

Connect the printer to be shared over the network along with this product via a USB cable and insert the power plug of this product into the outlet.

Collect wireless LAN setting information

This Setup Guide ex plains ho w to con gure C-67 00WG (this prod uct) to b e used i n a wirele ss LAN e nvironment .

This produc t has 3 methods o f initia l congura tion as listed be low:

- Conguration through a wireless LAN

- Conguration through a wired LAN

- Conguration using a USB memory

This Setup Guide describes how to congure this product through a wireless LAN or wired LAN.

For other conguration methods, please refer to the users manual.

If this p roduct ha s been u sed in an other ne twork, re set it to the fac tory def ault set tings.

For details on the f actory d efault co ngurati on, refer to To rese t to the factor y default setting s.

12.

Perform th e factor y defaul t congur ation acc ording to the conn ection b etween th is produc t and the PC .

- To perform t he facto ry defa ult cong uration w ith a wir eless LAN connect ion, refer to

Congure Thro ugh a Wirel ess LAN

- To perform t he facto ry defau lt cong uration w ith a wir ed LAN co nnection , refer to

Congure Thro ugh a Wired LAN.

(Install the printer driver on your PC and make sure you can print with a directly attached USB connection from your computer before using this product.)

The initial conguration of this product is complete and you do not need to congure the print server any more.

After setup is complete on one computer, each user that wants to use the Canon printer:

Go to

Step 2: Install the Applications

on the next page

Note: If you manually changed the wireless settings at ‘11’ on your PC, go straight to ‘3’ in Step 2.

Important:

The print server only needs to be configured on one computer.

After setup is complete, go to: ‘Step 2: Install the Applications’ for each computer that will use the printer.

Please refer to your wireless network adapter documentation for instructions on how to temporarily change your computer’s wireless settings to match those of the print server.

Important: When you make this temporary change, your computer will no longer be connected to the wireless network or Internet. After you have completed the setup for the print server, you will need to change your computer’s wireless settings back to their current settings. Please make sure you write down the settings for your wireless network before you make these changes for the print server configuration.

<< If you changed the wireless settings on the PC manually in ‘11’, this screen will appear >>

Select the SSID for your home or oce wireless network. If your network is security enabled, enter the network key or password and conrm it.

Click

Next.

Note: A more detailed manual including troubleshooting tips can be found on the CD (Insert the CD, and click on Manual when the Autorun menu appears) of this product.

Page 2

Click start -

All Programs -

SX Virtual Link

- SX Virtual

Link.

Scanning and other functions:

Conrm " " (available).

Select the Canon multifunction printer and click Connect.

To disconnect:

Select the Canon multifunction printer and click Disconnect.

Conrm " " (connected).Refer to the operation manual of the Canon multifunction printer to use the scanner, card reader, and fax function.

Step3 :

Use the Canon Multifunction Printer

Insert the CD-ROM (

CX User Software) into your

Windows PC.

* The User Account Control screen is displayed when conguration is

performed on Windows Vista. Select Continue.

Click

Application I nstallatio n

Check the notes on the screen and click Next.

Select the applications you want to install and click

Read the SOFTWARE LICENSE AGREEMENT and click Yes.

Click Start

* When in a Windows XP (SP2 or higher) or Vista environment, the above message will be

displayed. Select

Yes.

* The message below is displayed when installing the application on Windows Vista.

(1) Windows Security screen is displayed. Choose Install. (2) The screen to conrm the user adding the application to the Windows rewall exemptions list

is displayed. Select

Yes

Step2 : Install the Application

10.

Select the destination print server and Click

Add CX Print Wizard screen is displayed. Click

11.

Click

Select Yes

and click

Finish

12.

Conrm the conguration parameters and click Finish.

13.

Select the printer you want to use with this product and click

14.

Follow the instructions in the message on the screen and click

Finish.

15.

Click Finish. Now, the printer can be used in a network environment.

15.

16.

14.

Select

Yes

and click Finish.

17.

To reect the wireless conguration, disconnect the power plug from the outlet and unplug the network cable.

13.

12.

Verify the Link LED (Green) turns on and the Wireless LED (Green) turns o.

The following items are required:

Congure Through a Wired LAN

-network cable

-Ethernet Hub

-USB cable

Connect a network cable to this product. Connect the other end of the network cable to a network hub, switch, or router.

* If you are to use this product in a wired LAN environment after you nish the setup, you do not have to unplug the network cable.

* If the IP address of this product is changed after the port is created,

printing from the port will be unavailable.

Check the message and click OK.

CX Print

SX Virtual Link

Connect the AC adapter to this product and the power plug to the outlet.

(Do not connect the printer to this product yet. Printer will need to be connected at

‘17’.)

Read the message on the screen and click

Startup men u is display ed. Click

Print Server Setup.

Click

Wired

* In a Windows XP (SP2 or higher) or Vista environment, the above message

will be displayed. Select

Yes

* The User Account Control screen is displayed when conguration is performed

on Windows Vista. Select Continue.

Quick Setup screen is displayed.

Read the notes on the screen and click

Next.

Read the

SOFTWARE LICENSE AGREEMENT

and

click Yes

Select a product to be congured and click Next

* If your product is not displayed in the list, click

When you will use this product in the wireless network, select the wireless network that you wish to use from the list, enter the wireless network key and click

* If the wireless network that you wish to use is not

shown in the list, click

Detailed Cong and congure

each setting.

Conrm the conguration parameters and click Execute.

Connect the printer to be shared over the network along with this product via a USB cable and insert the power plug of this product into the outlet.

Insert the CD-ROM (

CX User Software

) into your Windows

PC.

Use to connect this product and a printer. There is no need to purchase a new USB cable if a cable was bundled with the printer to be connected to this product.

* If multi ple products are displayed in th e list, check the

Ethernet Address on the label of this product.

* Use a crossover cable when connecting this product directly to the PC.

Install the printer driver on your PC. For details, refer to the manual that came with your printer.

(Install the printer driver on your PC and make sure you can print with a directly attached USB connection from your computer before using this product.)

is for printing from your computer.

is for scanning and other functions.

Printing:

The printer is set up as a Windows printer. Just select the approriate Canon printer when printing.

Important: One person can be connected with SX Virtual Link for scanning at a time. When you are done scanning, you should disconnect from the Canon multifunction printer in SX Virtual Link so it will be available for another PC to be able to connect.

Important: It is necessary to install the applications on each computer that will use the Canon multifunction printer.

Select

Get IP Address Automatically

and click