Silex technology C-700, C-6100U, C- 5100 User Manual

Users Manual CX

I. Introduction

Thank you for purchasing PRICOM print server.

This manual provides complete information on how to setup and use PRICOM C-700/C­5100/C-6100U/C-6200U safely. Please read this manual carefully before using the
product. This manual is edited commonly for the three products and there are some
parts not applied for your PRICOM.

PRICOM print servers provide network connectivity for your printers.

PRICOM is compatible with status monitor of Canon printer driver. You can check the
printer status that is connected to the network at real time on the screen of your computer.

<PRICOM C-700/C-5100/C-6100U/C-6200U>„
Supported Protocol: TCP/IP and IPX Peer to Peer*
Supported OS: Windows 95/98/Me, Windows NT 4.0, Windows 2000, Windows XP.
*IPX Peer to Peer is an original protocol developed by silex technology, Inc.

-PRICOM C-700
10BASE-T compatible print server, which can be connected directly to parallel interface
port.

-PRICOM C-5100
10BASE-T/100BASE-TX compatible auto-detection print server, which can be connected
directly to parallel interface port.

-PRICOM C-6100U
10BASE-T/100BASE-TX compatible auto-detection print server, which can be connected
to USB interface port.

-PRICOM C-6200U
10BASE-T/100BASE-TX compatible auto-detection print server, which can be connected
to USB interface port.

Introduction

1-1

Users Manual CX

About this Manual

This manual uses the following symbols to point out specific information.
The information after the symbols should always be well observed.

This symbol indicates important information that needs to be observed when operating the

TIP

NOTE

product. Make sure to read this information for safe and proper use.

This symbol indicates useful information that is helpful when operating the product. When
you experience difficulties operating the product, please refer to this information first.

-Copying of all or part of this manual without our permission is forbidden.

-The contents of this manual may be changed without advance notice.

-If you have any question about this manual or our products, please contact our
customer support.

-This manual has been edited very carefully. However, silex technology, Inc. is not
responsible for any mistakes included in this manual or any damages, direct or indirect,
arising from the use of this manual.

Copyright © 2002 silex technology, Inc.

-Canon is a registered trademark of Canon Inc., Bubble Jet is a trademark of Canon Inc.

-Microsoft, Windows, Windows NT etc. are registered trademarks of Microsoft Corporation in the U.S. and
other countries.

-Other brand or product names are registered trademarks or trademarks of their respective companies.

Introduction

1-2

Users Manual CX

Safety Instructions

To ensure safe and proper use, please read the following information carefully before
starting to use our product. The safety instructions include important information on
the safe handling of the product and on general safety issues for the user.

IMPORTANT SAFEGUARDS

Make sure to read all safety instructions carefully and to fully understand them before
starting to use PRICOM.

This manual contains safety instructions that must be observed to avoid potential hazards
that could result in personal injuries or material damage. The safety instructions have
been classified according to the potential risk involved as follows:

Danger:
"Danger" indicates the existence of a hazard that could result in death or serious bodily injury if the safety
instruction is not observed.

Warning:
"Warning" indicates the existence of a hazard that could result in bodily injury if the safety instruction is
not observed.

Caution:
"Caution" indicates the existence of a hazard that could result in material damage if the safety instruction
is not observed.

Notice:
"Notice" contains general information that relates to the safe operation of the product.

1. PRICOM

Warning:
To avoid the risk of electric shock or possible damage, never remove the cover of PRICOM and never
disassemble PRICOM. Contact the dealer of silex technology, Inc. products for assistance if repair or
adjustment is necessary.

Introduction

1-3