Silencer SL- 51, SL- 62 User Manual

PROFESSIONAL SERIES

PROFESSIONAL SERIES

SL- 51

This unit is designed for professional installation only.

Please visit our website at www.silencer.com

USERS MANUAL

2-Channel One Button Remote Start
with Keyless Entry System

For Warranty information:

UM_FULL_SL51_REV_A

Magnadyne Corporation 1111 W. Victoria Street, Compton CA 90220 [phone]

1

PROFESSIONAL SERIES

REMOTE CONTROL TRANSCEIVER: SL-RF41

CHANGING THE BATTERY:

The SL-RF-41 One-way remote is powered by two CR2016 Batteries.

OPERATION:

C: REMOTE TRANSMITTER OPERATION:

Transmitter Button System Function Remark

Lock Doors & Arm System

+

-

II Switch to 2nd car operation For 1-way TX only, Press & hold until TX LED on

Panic function

Car Locator Press when in armed mode

Silent Arming / Disarming Ignition in “off” position.

Unlock Doors & Disarm System

Two Steps Door Unlock & Disarm
System(optional)

Trunk Release (Channel 3) Press and Hold for 2 seconds

Activate or Turn Off The Remote Start

Press and Hold for 3 seconds. Press Trunk
button to stop panic function

Press twice within 3 seconds.

Press button once. Press Twice if set to start
safety mode

CHIRP INDICATORS: PARKING LIGHT: LED INDICATORS

Chirp Function Parking light Function LED Function

1 chirp Lock 1 ash Lock Off Unlock

2 chirps Unlock 2 ashes Unlock Slow Flash Locked

ON

UM_FULL_SL51_REV_A

Running on
remote start

2

On (Solid) Valet Mode

PROFESSIONAL SERIES

SINGLE BUTTON TRANSMITTER OPERATION:

Transmitter
Button

System Function Remark

Initiate Remote Start sequence Press and release button once

Unlock vehicle doors Only when running on Remote Start

press and release button once

–

Stop Remote Start operation Only when running on Remote Start

press and release button twice

The X6RF1B single button
transmitter uses a 3 volt

CR2450 lithium battery

WARNINGS:

As with any product that performs automatic functions, there are certain safety precautions that you
must practice and be aware of.

• Keep the transmitter out of children’s reach.

• Do not leave anyone in the vehicle while running on remote control.

• Alert servicing personnel that the vehicle can be started automatically.

• Do not start the vehicle by remote while it’s in an enclosed area or garage.

• Always apply the parking brake and lock the vehicle as you exit the vehicle.

• The vehicle windows must be rolled up.

• Should the unit malfunction, disconnect the fuse until the problem is corrected.

• The use and operations of this system is the sole responsibility of the operator.

• Some areas may have local ordinances that prohibit leaving a vehicle running on public streets.

• THIS DEVICE CANNOT BE USED ON ANY STANDARD TRANSMISSION VEHICLE.

FOR AUTOMATIC TRANSMISSIONS ONLY!

ACTIVE ARMING – LOCK:

Press button on the transmitter.

The horn will chirp once and parking light will ash once indicating that the system is now locked. The vehicle’s doors will

lock upon arming if interfaced with the security system.

SILENT Lock / Unlock: Press the transmitter

and buttons at the same time. This will lock or unlock your security

system, No chirp sound will be heard, lock / unlock conrmation will be through the vehicles parking lights only.

ACTIVE DISARMING – UNLOCK:

1. Press button on the transmitter.

2. The horn will chirp twice and the parking lights will ash twice indicating that the security system is now disarmed. The
vehicle’s doors will unlock and the dome light will turn on for 30 seconds upon disarming. (Note: Power door locks must
be installed with the system.)

PATHWAY ILLUMINATION: When receiving an unlock /disarm signal, this feature will turn the parking lights “ON” for 30
seconds and for 10 seconds upon the lock signal. (Programmable)

TWO STEPS DOOR UNLOCK (Optional): This feature will independently unlock the driver’s door only when disarming
the system. Pushing the button a second time within 3 seconds will unlock the other doors.

UM_FULL_SL51_REV_A

3