Silencer 7905P, 7909P Owner's Manual

OWNER’S

MANUAL

Models: 7905P

7909P

Silencer®automotive security products have been developed through years of research and development to
provide the consumer with a product that is technologically advanced and easy to use. This manual will
provide a ready reference to the operation and maintenance of your new Silencer security system. To test
and operate the features of your new system, follow the procedures stated in this manual.

Please note that (2) Silencer security system models are covered in this manual:

Model
keyless entry system or by a Silencer security disarm key.

Model
by the factory installed keyless entry system or by a Silencer security disarm key.

7905P is an automatic arming starter disable system that can be controlled by the factory installed

7909P is an automatic arming starter disable system and full security system that can be controlled

7905P

Basic Operation

This section details the simple day-to-day operation of your Silencer security system.

System Arming

The 7905P will automatically arm 30 seconds after the ignition key is turned to the “Off” position. The
LED light will flash when the system becomes armed.
Note 1: If your vehicle has a factory installed Remote Keyless Entry System, anytime that you “Lock” the
doors using the remote control, the 7905P starter disable system will become armed.
Note 2: The automatic arming is programmable and can be turned off. Your vehicle must have a factory
installed Remote Keyless Entry System to arm and disarm the system.

System Disarming

1. If your vehicle has a factory installed Remote Keyless Entry System, press the “Unlock” button on the
remote transmitter to unlock the doors. This action will disarm your Silencer system. You have 60
seconds to enter the vehicle and start the engine.

2. If your vehicle does not have a factory installed Remote Keyless Entry system, you were provided a set
of coded keys to disarm your Silencer system. Enter the vehicle and insert your coded key into the
underdash receptacle. Remove the key. You now have 30 seconds to start the engine.

Optional Features

Optional Beeping Horn System Status and Warning: (When Installed)

When the beeping horn option is installed, every time the unit becomes armed the horn will beep one
time. When you disarm the system by inserting the Silencerkey into the receptacle or pressing the
“Unlock” button on your keyless entry transmitter, the horn will beep 2 times indicating a disarmed
condition.

If you forget to disarm your Silencersystem, the horn will begin to sound when you try to start your
vehicle. Turn off the ignition key and either press the “Unlock” button on your keyless entry transmitter
or insert your Silencerkey into the receptacle and remove it. You can now start your vehicle.

2

Optional Features (Continued)

Remote Panic (Optional beeping horn feature must be installed)

Note 1: The optional horn beep feature must be installed and the vehicle must have a factory installed

Remote Keyless Entry System for the Remote Panic option to operate.
At any time the model 6905P can be placed into personal panic mode. To activate this feature simply
press the “Lock” button on your keyless entry transmitter 4 times consecutively. The vehicle horn will
begin beeping. To turn off the panic alarm once it is activated, press the “Unlock” button on your keyless
entry transmitter.
Note 2: Once activated, the personal panic alarm feature will sound for 60 seconds and then turn off by
itself unless the “Unlock” button is press to turn it off.

Chirp Delete

If your system was delivered to you with the horn beep feature installed, it can be turned off. Ask your
dealer for additional information.

Primary Feature Operations

System Override/Valet Mode Operation

In the event that your Silencerkey or your factory keyless entry transmitter becomes lost or inoperative,
you can override your Silencersystem by using your ignition key and your removable valet switch. In
addition, if you allow another person to drive your car such as a mechanic, parking attendant or a friend,
the override system can also be used as a valet system. Valet Mode will disable the security system. To
test these features, repeat the following procedures:

Note: The black removable override/valet switch installs in the rear of the receptacle.

To Enter Override/Valet Mode (System is Disarmed)

1. Turn on the ignition key.

2. Depress the override/valet switch. You will feel the switch click to it’s “In” position.

3. The LED stays on continuously.

4. Turn off the ignition key and you are “In” valet mode.

5. The vehicle can be started at all times with the ignition key.

To Exit Override/Valet Mode

1. Turn on the ignition key.

2. Depress the override/valet switch. You will feel the switch click to its “Out” position.

3. Turn off the ignition key and you are “Out” of the valet mode.

4. The system will now resume normal operations.

3