1394 Dual-Port CardBus
Quick Installation Guide
Introducing the 1394 Dual-Port Cardbus
The 1394 Dual-Port CardBus is designed to add FireWire
(1394a) interface to notebook computers for easy
connection to DV camcorders, hard disk drives
(self-powered), scanners, printers, and other 1394 devices.
Features and Benefits
• Compliant with IEEE 1394-1995, P1394a-2000 and
OHCI 1.1 standards
• Supports serial bus data transfer rates of 100, 200
and 400Mbps
• Hot-swapping allows you to connect/detach
devices without first turning your system off
• Supports both asynchronous and isochronous data
transfer modes
• Works with a variety of 1394 devices including
digital cameras, DV camcorders (Sharp, Sony,
Panasonic, JVC, Cannon and other brands), portable
hard disks, CD-RW/DVD-ROMs, printers and other
audio/video devices
System Requirements
• Pentium II or equivalent notebook PC with one
available CardBus Type II slot
• Windows 98SE/ME/2000/XP/2003 Server
04-0238B
1
Recommended system for Digital Video capturing/editing:
• Pentium III or above notebook computer
• 128MB RAM and CD-ROM drive
• 4GB of available hard disk space
• Windows 98SE or later
Package Contents
• (1) 1394 Dual-Port CardBus
• (1) Quick installation guide
Layout
Power Adapter Jack*
Power LED
Figure 1. Layout
1394a Ports
*Note: The power adapter (not included) can be
purchased on SIIG's online store (see page 7). If
your FireWire device does not come with it's own
power supply, you will need to purchase this power
adapter.
2
(6-pin)
Hardware Installation
General instructions for installing the card are provided
below, since the design of portable computers may vary.
Refer to your system’s reference manual for further
information, if needed.
1. Power off your portable computer and any other
connected peripheral devices.
2. Insert the PC Card into the CardBus Type II slot of
your PC with its 68-pin connector facing the slot.
Make sure it is inserted all the way in for a solid
connection.
3. Power on your notebook PC.
Software Installation
This section will guide you through the installation of
your 1394 Dual-Port CardBus.
Windows 98SE Driver Installation
1. At the Add New Hardware Wizard, click Next.
2. Choose Search for the best driver for your device,
and click Next.
3. Uncheck all the boxes, click Next, Next, Next.
Note: If you are prompted to insert your Windows
Installation CD-ROM, insert it and click OK.
4. Click Finish, then restart Windows to complete the
driver installation.
3
Windows ME Driver Installation
1. At the Add New Hardware Wizard, choose
Automatic search for a better driver
(Recommended), then click Next.
2. Click Finish then restart Windows to complete the
installation.
Windows 2000/XP/Server 2003 Driver Installation
Windows 2000/XP/Server 2003 will automatically detect
and install the correct driver for your 1394 Dual-Port
CardBus. Restart Windows if prompted.
To Verify Successful Driver Installation:
1. Check Device Manager to verify successful driver
installation.
Windows 98SE/ME: From the main desktop, double
click My Computer, Control Panel, System, then
click Device Manager.
Windows 2000/XP/Server 2003: From the main
desktop, double click My Computer, Control Panel,
System, click Hardware, then Device Manager.
2. Double click 1394 Bus Controller or IEEE 1394 Bus
host controllers option.
- An IEEE 1394 Host Controller should be displayed.
4
Device Connection
Many 1394 devices have built-in driver support with
Windows 98SE/ME/2000/XP/Server 2003. Please refer
to the device’s user manual for detailed installation
information.
5
Empty Page
6
Technical Support
QUESTIONS? SIIG’s Online Support has the answers!
Simply visit our Web site at www.siig.com and click on
Support. Our online support database is updated daily with
new drivers and solutions. The answers to your problems
could be just a few clicks away.
If you can't find answers or solutions to your questions, you
have an option to submit the problems online to one of our
technical support analysts and we will promptly respond to
you with answers or solutions.
The 5-year manufacturer warranty supplied with this product
is offered by SIIG, Inc. If you should happen to encounter
any problems with this product, please follow the procedures
below.
1. If it is within the store's return policy period, please
return the product to the store where you purchased
from.
2. If your purchase has passed the store's return policy
period, please contact SIIG. See SIIG's Limited 5-year
Warranty card for more information.
Online Store
SIIG offers all of our products online at our company
store. Visit us at http://onlinestore.siig.com to find
our complete line of products, including hard to find
items and accessories (power adapters, cables, upgrade
kits, etc.).
7
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer
of I/O connectivity products, including PCI & ISA serial and parallel
ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b),
Networking, Sound Cards, and other accessories. SIIG is the premier
one-stop source of upgrades.
SIIG products offer comprehensive user manuals, many user-friendly
features, and all products are backed by a 5-year manufacturer
warranty. High-quality control standards are evident by the overall
ease of installation and compatibility of our products, as well as one
of the lowest defective return rates in the industry. SIIG products can
be found in most computer retail stores, mail order catalogs, and ecommerce sites in the Americas and the UK, as well as through major
distributors, system integrators, and VARs.
PRODUCT NAME
1394 Dual-Port CardBus
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR
PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Ave.
Fremont, CA 94538-3152
1394 Dual-Port CardBus is a trademark of SIIG, Inc.
SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are
registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation.
Other names used in this publication are for identification only and may be trademarks of their
respective companies.
June, 2004 Copyright ©2004 by SIIG, Inc. All rights reserved.
Loading...