Page 1
1
Video Splitter
Quick Installation Guide
04-0403A
Introducing the Video Splitter
The Video Splitter easily splits any video signal, while
maintaining vivid picture quality, to 2, 4 or 8 monitors.
Features and Benefits
• Functions as a video signal extender - up to 210 feet,
daisy chainable
• Ultra high bandwidth of 400 MHz
• Superior video quality, maintains the highest signal
strength in all applications up to 2048x1536 @ 72Hz
• Supports VGA, SVGA, XGA and multi-sync monitors
• Hot pluggable and requires no drivers
• Works with any hardware platform and with all
operating systems
• Metal housing ensures durability and reliable setup
System Requirements
• Desktop or notebook computer with VGA port
• HDB15 (male-to-male) shielded VGA cable
Package Contents
• Video Splitter VGA (2, 4 or 8-port)
• Power adapter
• This quick installation guide
Page 2
2
Layout
Depending on the model, layout may be different.
Figure 1. Layout
Note: Video splitters can be daisy chained by
connecting a Monitor port of the first video splitter
to the PC port of the next video splitter.
Hardware Installation
To maintain the highest picture quality, the use of
premium quality high density, shielded VGA cables is
recommended.
1. Turn OFF the power to your computer and
monitor(s).
2. Disconnect the monitor from your computer.
3. Using a VGA cable (not included) connect the PC
port of the video splitter to the computer's VGA
port.
4. Connect your VGA monitor(s) to any Monitor port
of the video splitter.
5. Connect the power adapter to the video splitter,
then plug the adapter into a reliable power source.
6. Turn on your monitor(s).
7. Boot the computer. The same image should be
displayed on each monitor.
Power jack
Monitor (output)
PC (input)
Page 3
3
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers!
Simply visit our website at www.siig.com and click on Support.
Our online support database is updated daily with new drivers
and solutions. Answers to your questions could be just a few clicks
away. You can also submit questions online and one of our technical
support analysts will promptly respond.
A 5-year manufacturer warranty supplied with this product is
offered by SIIG, Inc. Please see SIIG website for more warranty
details. If you should happen to encounter any problems with this
product, please follow the procedures below.
If it is within the store's return policy period, please return the
product to the store where you purchased from.
If your purchase has passed the store's return policy period, please
follow these steps to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then RMA to submit a
request to SIIG RMA. If the product is determined to be
defective, an RMA number will be issued. SIIG RMA department
can also be reached at (510)413-5333.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All software, cable(s)
and any other accessories that came with the original package
must be included.
• Clearly write your RMA number on the top of the returned
package. SIIG will refuse to accept any shipping package, and
will not be responsible for a product returned without an
RMA number posted on the outside of the shipping carton.
• You are responsible for the cost of shipping the product to SIIG
at the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538
RMA #:
• SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
no cost to the customer.
Page 4
Video Splitter is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered
trademark of Intel Corporation. Mac and Mac OS are registered trademarks of Apple Computer, Inc.
Other names used in this publication are for identification only and may be trademarks of their
respective companies.
October, 2005 Copyright ©2005 by SIIG, Inc. All rights reserved.
PRODUCT NAME
Video Splitter
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Ave.
Fremont, CA 94538-3152
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer
of I/O connectivity products, including PCI & ISA serial and parallel
ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b),
Networking, Sound Cards, and other accessories. SIIG is the premier
one-stop source of upgrades.
SIIG products offer comprehensive user manuals, many user-friendly
features, and are backed by an extensive manufacturer warranty.
High-quality control standards are evident by the overall ease of
installation and compatibility of our products, as well as one of the
lowest defective return rates in the industry. SIIG products can be
found in computer retail stores, mail order catalogs, and e-commerce
sites in the Americas and the UK, as well as through major distributors,
system integrators, and VARs.
Loading...