SIIG JU-SW4212-S1 Quick Installation Manual

1

04-0399B

USB 2.0 Switch

Quick Installation Guide

Introducing the USB 2.0 Switch

The USB 2.0 Switch is designed to share USB device(s)
between multiple systems.

Features and Benefits

• Compliant with USB Specifications, Revision 2.0.
Hot-swapping feature allows you to attach/
detach USB devices without powering down
your computer

• Use keyboard Hotkey control (PC only) or
Power LED/Manual Switching Button to switch
between computers

• Designed for USB devices including printers,
scanners, hard disk drives, cameras, CD-ROMS
and Zip drives

Note: Not designed to work with keyboard or
mouse.

2

System Requirements

• PC or Mac computer with an available USB port
(USB 2.0 recommended)

• Windows® 98SE/ME/2000/XP (32-/64-bit)/
Server 2003 (32-/64-bit)/Vista (32-/64-bit)

• Mac OS X v10.0 or later

Package Contents

• USB 2.0 Switch

• USB cables (6 Ft, Type A to Type B)

• Driver CD

• Quick installation guide

Layout

Do not connect the USB 2.0 Switch to your system until
after the driver has been installed. Please refer to the
Installation section starting on page 5 to install its driver.

3

USB 2.0 Switch 2-to-2

• Two Type B connectors for system connection

• Two Type A connectors for USB device
connection

• Convenient manual switching buttons

Figure 1. USB 2.0 Switch 2-to-2 Layout

To USB device

(Type A connector)

(Type B connector)

To PC

Power LED/Manual

Switching Button

4

USB 2.0 Switch 4-to-2

• Four Type B connectors for system connection

• Two Type A connectors for device connection

• Convenient manual switching buttons

Figure 2. USB 2.0 Switch 4-to-2 Layout

To USB device

(Type A connector)

Power LED/Manual Switching Button

To PC

(Type B connector)

To PC

(Type B connector)