SIIG JU-NE0211-S1 Quick Installation Manual

1

USB 3.0 to Gigabit
Ethernet Adapter

Quick Installation Guide

04-0814B

Introduction

The USB 3.0 to Gigabit Ethernet Adapter adds one
10/100/1000 Mbps Ethernet port to your USB

3.0 enabled system.

Features and Benefits

• Compliant with USB 3.0 specification

• Supports full duplex with flow control and

half duplex with back pressure operation

• Compliant with IEEE 802.3, 802.3u, 802.3ab

• Supports IEEE 802.3az (Energy Efficient
Ethernet)

• Supports advanced link down power saving

when Ethernet cable is unplugged

Serial Number Sticker

Serial number is required for future return or
exchange.

2

System Requirements

• Desktop or notebook computer with an

available USB 3.0 port

• Windows

®

8 (32-/64-bit) / 7 (32-/64-bit) /

Vista (32-/64-bit) / XP (32-/64-bit) / Server
2008 & 2003 (32-/64-bit) / Server 2008 R2

• Mac OS 10.6.x or later

Package Contents

• USB 3.0 to Gigabit Ethernet Adapter

• Driver CD

• Quick installation guide

3

Layout

Figure 1: USB 3.0 to Gigabit Ethernet Adapter

LED Indicators

Two LEDs to monitor your network connection.

• Activity LED (Green): Blinking when

network activity is detected

• Connectivity LED (Orange): On when

network is connected

USB 3.0 connector

Activity LED

Connectivity LED

RJ45 port

4

Driver Installation

Note: Do not connect the USB 3.0 to Gigabit
Ethernet Adapter to your computer before

instructed to do so.

Windows 8 (32-/64-bit)

1. Insert the driver CD.

2. Press Windows key and R, type D:\Win

8\setup.exe in the Run window, then click
OK. (Change D: to match your CD\DVD-

ROM drive letter)

3. At the User Account Control, click Yes.

4. At the InstallShield Wizard Complete, click
Finish.

5. Plug the Adapter into an available USB 3.0
port.

6. Plug your network cable into the Adapter.

7. Restart the computer, then plug the other
end of network cable into your network
hub, switch, or router.