SIIG JU-CR0012-S1 Quick Installation Manual

1

04-0837B

USB 2.0 Smart Card Reader
Quick Installation Guide

Introduction

The USB 2.0 Smart Card Reader is portable, and is
widely used with USB equipped PC or Mac
desktops or laptops.

Key Features and Benefits

• Compliant with all major smart cards and
industry standards

• Power and activity LED indicator

• USB bus-powered and plug-n-play

Package Contents

• USB 2.0 Smart Card Reader

• Driver CD & Quick installation guide

System Requirements

• Desktop or laptop with an available USB
port

• Windows

®

2000 SP4 or later

• Mac

®

OS X v10.6.x / 10.7.x / 10.8.x

2

Layout

Figure 1: Layout

• Power LED: steady blue light means power on

• Activity LED: pink light means smart card is detected

Driver Installation

Windows Systems

For 2000 and XP, follow the steps below to install
the driver. For others, the driver is embedded,
just plug the reader into a USB port and the
driver will load automatically.

1. Plug the card reader to an available USB
port. Click Cancel at the Found New
Hardware (if prompted).

2. Insert the driver CD. Double click RSKIT_
100618_AllinOne in the driver CD.

USB connector

Smart card

slot

Power and Activity LED indicators

3

3. Wait while the driver installs, then click
Finish to complete the installation.

Mac Systems

1. Plug the card reader to an available USB
port.

2. Insert the driver CD. Choose Mac folder,
double click Realtek Mac OS X Installer in
the driver CD.

3. Click Continue, Install, then click Restart
to complete the installation and reboot your
Mac.